-- Copyright 2003-2011 Philipp Lehman
-- Copyright 2015-2019, 2021, 2022 Joseph Wright
-- Copyright 2022 Augusto Stoffel
-- SPDX-License-Identifier: LPPL-1.3c+
--
-- Adapted from the csquotes package documentation, which can be found at
-- https://ctan.org/pkg/csquotes.
ctan_package = "csquotes"
dependencies = {"etoolbox.sty", "keyval.sty"}
commands = {
  ["@enablequotes"] = {
    details = [[
```latex
\@enablequotes
```

This command enables all characters allocated as active quotes. It also
restores their definitions if they were disabled or accidentally
overwritten. With single-byte encodings, this command (re)defines all
allocated characters and makes them active. With UTF-8 encoding, it
redefines the internal macro used by the `inputenc` package to typeset
the respective UTF-8 sequence (`\u8:``character`). UTF-8 characters in
the range 0--127 are handled as with single-byte encodings. When using a
TeX engine with native UTF-8 support, such as XeTeX , all characters are
handled as with single-byte encodings.
]]
  },
  ["@verbatimquotes"] = {
    details = [[
```latex
\@verbatimquotes
```

For verbatim environments and similar applications, use this command
rather than `\@disablequotes`. It redefines the active quotes in a way
that is better suited for verbatim typesetting. With single-byte
encodings, it will do one of the following things. (1) If a character is
in the range 0--127, it is redefined such that it expands to itself with
category code 12. (2) If a character is in the range 128--255, there are
two possibilities. (a) If it had already been active when it was
allocated, its former definition is restored. (b) If it had not been
active before, it is redefined such that it expands to itself with its
former category code.

Characters in the range 0--127 are added to the `\dospecials` list.
Characters in the range 128--255 remain active, permitting the
`inputenc` package to typeset them verbatim (due to case 2a, which
implies that you must load `inputenc` before allocating active quotes).
Case 2b is usually undesirable in verbatim environments. If `inputenc`
is loaded, however, this should not happen. With UTF-8 encoding, this
command restores the former definition of the internal macro used by the
`inputenc` package to typeset the respective UTF-8 sequence. UTF-8
characters in the range 0--127 are handled as with single-byte
encodings. When using a TeX engine with native UTF-8 support, such as
XeTeX , all characters are handled as with single-byte encodings.

Due to case 1, `\@verbatimquotes` itself is independent of any
`\dospecials` processing. You may typeset all active quotes verbatim by
using this command exclusively. The advantage of this approach is that
it does not require any category code changes, hence this command may
also be used to modify an argument after it has been read. Also note
that the standard LaTeX verbatim environments as well as all
environments provided by or defined via the packages `verbatim`,
`fancyvrb`, `moreverb`, and `alltt` are catered for automatically. This
also applies to the `\verb` command and the `shortvrb` package.
]]
  },
  BlockquoteDisable = {
    arguments = {{meta = "code"}},
    details = [[
```latex
\BlockquoteDisable{code}
```

The `code` may be arbitrary LaTeX code which redefines vulnerable
commands locally such that they work differently during the trial pass.
The `code` itself should obviously not include any global assignments.
This solution should be considered as a last ressort but may be the
quickest way to fix a vulnerable package. Note that there is no need to
escape parameter characters by doubling them in the `code` argument.
Simply use this command like `\AtBeginDocument` and similar hooks.
]]
  },
  DeclareAutoPunct = {
    arguments = {{meta = "characters"}},
    details = [[
```latex
\DeclareAutoPunct{characters}
```

This command defines the punctuation marks to be considered by the
quotation commands as they scan ahead for punctuation. Note that
`characters` is an undelimited list of characters. Valid `characters`
are period, comma, semicolon, colon, exclamation and question mark. The
default setting is:

    {}
    \DeclareAutoPunct{.,;:!?}

This definition is restored automatically whenever the `autopunct`
package option is set to `true`. Executing `\DeclareAutoPunctuation{}`
is equivalent to setting `autopunct=false`, i.e. it disables this
feature.
]]
  },
  DeclarePlainStyle = {
    arguments = {{meta = "opening outer mark"}, {meta = "closing outer mark"}},
    details = [[
```latex
\DeclarePlainStyle{opening outer mark}{closing outer mark}\\
```

opening inner markclosing inner mark

This command may be used in the configuration file or in the document
preamble. By default, outer quotations get straight double quotes and
inner quotations straight single quotes. See ?? for additional hints
concerning PDF strings.
]]
  },
  DeclareQuoteAlias = {
    arguments = {
      {delimiters = {"[", "]"}, meta = "variant", optional = true},
      {meta = "style"},
      {meta = "alias"}
    },
    details = [[
```latex
\DeclareQuoteAlias[variant]{style}{alias}
\DeclareQuoteAlias{first-level alias}{second-level alias}
```

This command may be used in the configuration file or in the document
preamble. The alias may point to a backend style or to another alias.
Most language aliases refer to a backend style, but some point to an
intermediate alias instead. If the alias is defined for the sake of the
`babel` or the `polyglossia` package, its name must be identical to the
language name used by `babel`/`polyglossia`, i.e. the expansion of
`\languagename`. See ?? for an illustration of how quote styles,
aliases, and package options interact. A list of all aliases defined by
default is given in ??.
]]
  },
  DeclareQuoteGlyph = {
    arguments = {{meta = "encoding"}, {meta = "position"}},
    details = [[
```latex
\DeclareQuoteGlyph{encoding}{position}
```


]]
  },
  DeclareQuoteOption = {
    arguments = {{meta = "style"}},
    details = [[
```latex
\DeclareQuoteOption{style}
```

When using the new option, the name of the quote style will serve as the
key. The value may be any style variant defined for the respective
style. The package option will select a variant by defining an alias
pointing to the desired backend style. This command is available in the
configuration file only. See ?? for an illustration of how quote styles,
aliases, and package options interact.
]]
  },
  DeclareQuoteStyle = {
    arguments = {
      {delimiters = {"[", "]"}, meta = "variant", optional = true},
      {meta = "style"},
      {delimiters = {"[", "]"}, meta = "outer init", optional = true},
      {delimiters = {"[", "]"}, meta = "inner init", optional = true}
    },
    details = [[
```latex
\DeclareQuoteStyle[variant]{style}[outer init][inner init]\\
```

opening outer mark\[middle outer mark\]closing outer mark\[kern\]  
opening inner mark\[middle inner mark\]closing inner mark

This command may be used in the configuration file or in the document
preamble. The term <outer> refers to the first quotation level,
<inner> means quotations within another quotation. A <middle mark>
is a quotation mark inserted at the beginning of every paragraph within
a quotation spanning multiple paragraphs. In most cases, the arguments
defining the quotation marks will simply contain one of the commands
listed in ??. If both an outer and an inner quotation begin or end
simultaneously, the kerning specified by the value `kern` will be
inserted between the adjoining quotation marks. While this value can be
given in any unit known to TeX , it is advisable to use the relative,
font-dependent unit <em> instead of absolute units such as points,
inches, or millimeters. Note that `kern` is used as a fallback value
only. If the font provides kerning data for the respective pair of
quotation marks the font's kerning takes precedence. `outer init` and
`inner init` are all-purpose hooks initializing the quote style.
Selecting a quote style will make these hooks available to all quotation
commands without expanding them. The execution of `outer init` will take
place immediately before the opening outer quote is inserted, but inside
the group formed by the quotation. `inner init` is executed before the
opening inner quote is inserted. It is advisable to avoid any global
assignments in this context to prevent interference with other styles.
Whenever `inner init` is used `outer init` has to be given as well, even
if the argument is empty. Refer to ?? for a list of all predefined quote
styles and their variants. These are the backend styles only, see also
?? for a list of language aliases. See ?? for some examples as well as
an illustration of how quote styles, aliases, and package options
interact.
]]
  },
  EnableQuotes = {
    details = [[
```latex
\EnableQuotes
```

Enables all active quotes by redefining the allocated characters and
making them active. It also restores them when disabled, set to
verbatim, or overwritten.
]]
  },
  ExecuteQuoteOptions = {
    arguments = {{meta = "key=value,\\,... "}},
    details = [[
```latex
\ExecuteQuoteOptions{key=value,\,... }
```

This command permits presetting package options in the configuration
file. It may also be used in the document preamble.
]]
  },
  MakeAutoQuote = {
    arguments = {
      {literal = "*", optional = true},
      {meta = "character 1"},
      {meta = "character 2"}
    },
    details = [[
```latex
\MakeAutoQuote*{character 1}{character 2}
```

All active quotes defined with `\MakeAutoQuote` work like `\enquote`.
Those defined with `\MakeOuterQuote` and `\MakeInnerQuote` cover only a
part of this functionality. The former correspond to the outer level of
`\enquote` whereas the latter correspond to the starred version.
`\MakeAutoQuote*` is similar to `\MakeInnerQuote`, i.e. it corresponds
to `\enquote*`.
]]
  },
  MakeBlockQuote = {
    arguments = {
      {meta = "character 1"},
      {meta = "delimiter"},
      {meta = "character 2"}
    },
    details = [[
```latex
\MakeBlockQuote{character 1}{delimiter}{character 2}
```

The arguments are checked for validity, see ?? for details. All active
quotes defined with `\MakeBlockQuote` behave essentially the same as
`\blockquote`, but the handling of the citation is slightly different.
`character 1` will serve as the opening mark in the source file,
`character 2` as the closing one. The character indicated by the middle
argument `delimiter` will serve as a delimiter separating the quoted
text from the citation which is given last as the active quotes are
used:

    \MakeBlockQuote{<}{|}{>}
    ...
    <text|citation>

If the delimiter is omitted, the entire text between the opening and the
closing mark will be treated as quotation text.
]]
  },
  MakeForeignBlockQuote = {
    arguments = {
      {meta = "lang"},
      {meta = "character 1"},
      {meta = "delimiter"},
      {meta = "character 2"}
    },
    details = [[
```latex
\MakeForeignBlockQuote{lang}{character 1}{delimiter}{character 2}
```

The active quotes defined with this command are similar in concept and
function to `\foreignblockquote`. The behavior of the delimiter
character is similar to `\MakeBlockQuote`.
]]
  },
  MakeForeignQuote = {
    arguments = {
      {literal = "*", optional = true},
      {meta = "lang"},
      {meta = "character 1"},
      {meta = "character 2"}
    },
    details = [[
```latex
\MakeForeignQuote{lang}{character 1}{character 2}
\MakeForeignQuote*{lang}{character 1}{character 2}
```

The active quotes defined with the above commands are similar in concept
and function to `\foreignquote` and `\foreignquote*`, respectively.
]]
  },
  MakeHybridBlockQuote = {
    arguments = {
      {meta = "lang"},
      {meta = "character 1"},
      {meta = "delimiter"},
      {meta = "character 2"}
    },
    details = [[
```latex
\MakeHybridBlockQuote{lang}{character 1}{delimiter}{character 2}
```

The active quotes defined with this command are similar in concept and
function to `\hybridblockquote`. The behavior of the delimiter character
is similar to `\MakeBlockQuote`.
]]
  },
  MakeHyphenQuote = {
    arguments = {
      {literal = "*", optional = true},
      {meta = "lang"},
      {meta = "character 1"},
      {meta = "character 2"}
    },
    details = [[
```latex
\MakeHyphenQuote*{lang}{character 1}{character 2}
```

The active quotes defined with the above commands are similar in concept
and function to `\hyphenquote` and `\hyphenquote*`, respectively.
]]
  },
  MakeInnerQuote = {
    arguments = {{meta = "character"}},
    details = [[
```latex
\MakeOuterQuote{character}
\MakeInnerQuote{character}
```

`\MakeAutoQuote` defines active quotes which toggle between outer and
inner quotations automatically. The two mandatory arguments serve as
opening and closing mark and must be distinct:
]]
  },
  MakeOuterQuote = {
    arguments = {{meta = "character"}},
    details = "$ref:csquotes.sty#/commands/MakeInnerQuote/details"
  },
  SetBlockEnvironment = {
    arguments = {{meta = "environment"}},
    details = [[
```latex
\SetBlockThreshold{integer}
\SetBlockEnvironment{environment}
\SetCiteCommand{command}
```

`\SetBlockThreshold` defines the number of lines or words the block
quotation facilities use as a threshold when determining whether a
quotation should be typeset in inline or in display mode. The default is
three. `\SetBlockEnvironment` specifies the environment used for block
and display quotations. It takes the name of an existing environment as
its argument. The default is the `quote` environment provided by most
document classes. The argument to `\SetCiteCommand` specifies a
replacement for `\cite` which will be used by all integrated quotation
facilities to handle citations. It must be a single command which takes
one or two optional arguments followed by a mandatory one, the citation
key. The default is `\cite`. The citation commands of the `natbib`,
`jurabib`, and `biblatex` packages, which take two optional arguments,
are supported.
]]
  },
  SetBlockThreshold = {
    arguments = {{meta = "integer"}},
    details = "$ref:csquotes.sty#/commands/SetBlockEnvironment/details"
  },
  SetCiteCommand = {
    arguments = {{meta = "command"}},
    details = "$ref:csquotes.sty#/commands/SetBlockEnvironment/details"
  },
  VerbatimQuotes = {
    details = [[
```latex
\VerbatimQuotes
```

Switches to verbatim active quotes. All active quotes will be printed
verbatim until their default behavior is restored with `\EnableQuotes`.
]]
  },
  blockcquote = {
    arguments = {
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\blockcquote[prenote][postnote]{key}[punct]{text}<tpunct>
```

The difference between `\blockcquote` and `\blockquote` is that there
are three citation arguments instead of one. The handling of these
citation arguments is similar to `\textcquote`; see ?? for details. Also
see ?? on how to customize block quotations.
]]
  },
  blockquote = {
    arguments = {
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\blockquote[cite][punct]{text}<tpunct>
```

This command determines the length of the `text`. If the length exceeds
a certain threshold, the `text` will be typeset in display mode, i.e. as
a block quotation. If not, `\blockquote` will behave like `\textquote`.
Depending on the `thresholdtype` option, the threshold may be based on
the number of lines required to typeset the `text` or on the number of
words in the `text`. If the `parthreshold` option has been enabled, any
explicit paragraph or line break in the `text` will trigger the
threshold, i.e. it will be typeset in display mode regardless of its
length. The default threshold setup is three lines with `parthreshold`
enabled. The default environment used for display quotations is the
`quote` environment. See ?? on how to change these parameters. Note that
`csquotes` will force inline quotations in footnotes, parboxes,
minipages, and floats by default. Use the `csdisplay` option from ?? to
change this behavior. The optional arguments `cite` and `punct` specify
the citation and any terminal punctuation of the `text`. `tpunct`
denotes trailing punctuation after the command. If the `autopunct`
option is enabled, the quotation commands will scan ahead for
punctuation marks immediately following their last argument and can move
them around if required. See ?? on how to change the way these arguments
are handled and ?? for reasons why you may want to specify the
punctuation as a separate argument.
]]
  },
  closeautoquote = {
    details = [[
```latex
\openautoquote Opens a nestable quotation.
\closeautoquote Closes a nestable quotation.
```


]]
  },
  closeinnerquote = {
    details = [[
```latex
\openinnerquote Opens an inner quotation.
\closeinnerquote Closes an inner quotation.
```


]]
  },
  enquote = {
    arguments = {{literal = "*", optional = true}, {meta = "text"}},
    details = [[
```latex
\enquote{text}
\enquote*{text}
```

Like all quotation facilities, this command is context sensitive.
Depending on the nesting level, it will toggle between outer and inner
quotation marks with plain and nested quotations. The starred version of
this command skips directly to the inner level. If multilingual support
is enabled, the style of all quotation marks will be adapted to the
current language.
]]
  },
  foreignblockcquote = {
    arguments = {
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\foreignblockcquote{lang}[prenote][postnote]{key}[punct]{text}<tpunct>
```

This command combines `\blockcquote` with `\foreignlanguage`. Long
quotations will be wrapped in an `otherlanguage*` environment. The
handling of the citation arguments is similar to `\textcquote`.
]]
  },
  foreignblockquote = {
    arguments = {
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\foreignblockquote{lang}[cite][punct]{text}<tpunct>
```

This command behaves like `\foreignquote` if the quotation is short. If
it exceeds the threshold, it will be wrapped in an `otherlanguage*`
environment which is in turn wrapped in a block quotation environment.
The arguments are handled as with `\blockquote`.
]]
  },
  foreignquote = {
    arguments = {{literal = "*", optional = true}, {meta = "lang"}, {meta = "text"}},
    details = [[
```latex
\foreignquote{lang}{text}
\foreignquote*{lang}{text}
```

This command combines `\enquote` with `\foreignlanguage`. It switches
hyphenation patterns and enables the extra definitions provided by
`babel`/`polyglossia` for `lang`, which must be a language name known to
the respective package. The quotation marks will match the language of
the quoted piece of text.
]]
  },
  foreigntextcquote = {
    arguments = {
      {literal = "*", optional = true},
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\foreigntextcquote{lang}[prenote][postnote]{key}[punct]{text}<tpunct>
\foreigntextcquote*{lang}[prenote][postnote]{key}[punct]{text}<tpunct>
```

This command combines `\textcquote` with `\foreignlanguage`. The
handling of the arguments is similar to `\textcquote`.
]]
  },
  foreigntextquote = {
    arguments = {
      {literal = "*", optional = true},
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\foreigntextquote{lang}[cite][punct]{text}<tpunct>
\foreigntextquote*{lang}[cite][punct]{text}<tpunct>
```

This command combines `\textquote` with `\foreignlanguage`. Apart from
the language, the arguments are handled as with `\textquote`.
]]
  },
  hybridblockcquote = {
    arguments = {
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\hybridblockcquote{lang}[prenote][postnote]{key}[punct]{text}<tpunct>
```

This command behaves like `\hyphenblockcquote` if the quotation is
short, and like `\foreignblockquote` if it is long. The handling of the
citation arguments is similar to `\textcquote`.
]]
  },
  hybridblockquote = {
    arguments = {
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\hybridblockquote{lang}[cite][punct]{text}<tpunct>
```

This command behaves like `\hyphenquote` if the quotation is short. If
it exceeds the threshold, the command behaves like `\foreignblockquote`.
In other words, it combines features of `\foreignblockquote` and
`\hyphenblockquote`. The arguments are handled as with `\blockquote`.
]]
  },
  hyphenquote = {
    arguments = {{literal = "*", optional = true}, {meta = "lang"}, {meta = "text"}},
    details = [[
```latex
\hyphenquote*{lang}{text}
```

This command combines `\enquote` with the `hyphenrules` environment,
that is, it merely switches hyphenation patterns. The quotation marks
will match the language of the text surrounding the quotation.
]]
  },
  hyphentextcquote = {
    arguments = {
      {literal = "*", optional = true},
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\hyphentextcquote*{lang}[prenote][postnote]{key}[punct]{text}<tpunct>
```

This command combines `\textcquote` with the `hyphenrules` environment.
The handling of the arguments is similar to `\textcquote`.
]]
  },
  hyphentextquote = {
    arguments = {
      {literal = "*", optional = true},
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\hyphentextquote*{lang}[cite][punct]{text}<tpunct>
```

This command combines `\textquote` with the `hyphenrules` environment.
Apart from the language, the arguments are handled as with `\textquote`.
]]
  },
  ifblockquote = {
    arguments = {{meta = "true"}, {meta = "false"}},
    details = [[
```latex
\ifblockquote{true}{false}
```

Expands to `true` in all block and display quotations, and to `false`
otherwise.
]]
  },
  ifpunctmark = {
    arguments = {{meta = "character"}, {meta = "true"}, {meta = "false"}},
    details = [[
```latex
\ifpunctmark{character}{true}{false}
```

Expands to `true` if preceeded by the punctuation mark `character`, and
to `false` otherwise. The `character` may be a period, a comma, a
semicolon, a colon, an exclamation mark, or a question mark. Note that
this test is only available in the definition of the hooks from ??.
]]
  },
  ifterm = {
    arguments = {{meta = "true"}, {meta = "false"}},
    details = [[
```latex
\ifterm{true}{false}
```

Expands to `true` if preceeded by a terminal punctuation mark (period,
exclamation mark, or question mark), and to `false` otherwise. Note that
this test is only available in the definition of the hooks from ??.
]]
  },
  iftextpunct = {
    arguments = {{meta = "text"}, {meta = "true"}, {meta = "false"}},
    details = [[
```latex
\iftextpunct{text}{true}{false}
```

Executes `true` if the `text` ends with any punctuation mark, and to
`false` otherwise. This command is robust.
]]
  },
  initiquote = {
    details = [[
```latex
\initoquote Executes the outer initialization hook.
\initiquote Executes the inner initialization hook.
```


]]
  },
  initoquote = {details = "$ref:csquotes.sty#/commands/initiquote/details"},
  mkbegdispquote = {
    arguments = {{meta = "punct"}, {meta = "cite"}},
    details = [[
```latex
\mkbegdispquote{punct}{cite}
\mkenddispquote{punct}{cite}
```

The `\mkbegdispquote` and `\mkenddispquote` hooks are used by
`displayquote` and related environments from ??. These hooks take two
arguments:

#1  
The `punct` argument passed to the `\begin` line of the environment. If
there is no `punct` argument, this parameter is empty.

#2  
The `cite` argument passed to the environment, wrapped in `\mkcitation`.
If there is no `cite` argument, this parameter is empty. With integrated
quotation environments, this parameter is the citation code, wrapped in
`\mkccitation`.

By default, `\mkenddispquote` adds the `punct` argument as well as the
`cite` argument or the citation code at the very end of the quotation.
`\mkbegdispquote` does not insert anything be default. This is
equivalent to the following definition:

    \newcommand{<<\mkbegdispquote>>}[2]{}
    \newcommand{<<\mkenddispquote>>}[2]{#1#2}

See ?? for practical examples.
]]
  },
  mkcitation = {
    arguments = {{meta = "cite"}},
    details = [[
```latex
\mkcitation{cite}
```

All facilities which take a `cite` argument will pass it to the
`\mkcitation` hook, which may be redefined to format the citation.
`\mkcitation` will only be executed if there is a citation. The default
behavior is to separate the citation from the preceding text by an
interword space and enclose it in parentheses. This is equivalent to the
following definition:

    [showspaces=true]
    \newcommand*{<<\mkcitation>>}[1]{ (#1)}
]]
  },
  mkenddispquote = {
    arguments = {{meta = "punct"}, {meta = "cite"}},
    details = "$ref:csquotes.sty#/commands/mkbegdispquote/details"
  },
  mktextquote = {
    arguments = {
      {meta = "open"},
      {meta = "text"},
      {meta = "close"},
      {meta = "punct"},
      {meta = "tpunct"},
      {meta = "cite"}
    },
    details = [[
```latex
\mktextquote{open}{text}{close}{punct}{tpunct}{cite}
```

The `\mktextquote` hook controls the layout of all text quotations. This
hook is used by `\textquote` and related commands from ??. `\blockquote`
and related commands from ?? use this hook for short quotations. It
takes six arguments which may be arranged according to the desired
output:

#1  
The opening quotation mark.

#2  
The `text` argument of the command.

#3  
The closing quotation mark.

#4  
The optional `punct` argument of the command. If there is no `punct`
argument, this parameter is empty.

#5  
Trailing `tpunct` punctuation immediately after the command. If there is
no such punctuation or if the `autopunct` feature is disabled, this
parameter is empty.

#6  
The optional `cite` argument of the command, wrapped in `\mkcitation`.
If there is no `cite` argument, this parameter is empty. With integrated
quotation commands, this parameter is the citation code, wrapped in
`\mkccitation`.

By default, `\mktextquote` encloses the `punct` argument in the
quotation marks along with the `text` and inserts the `cite` argument or
the citation code before any trailing `tpunct` punctuation. This is
equivalent to the following definition:

    \newcommand{<<\mktextquote>>}[6]{#1#2#4#3#6#5}

The way in which `\mktextquote` hooks into the formatting process is
best seen when looking at an example. The commands

    \textquote[<<cite>>]{<<short quote>>}
    \textcquote[<<55>>]{<<key1>>}[<<.>>]{<<short quote>>}
    \blockcquote[<<87>>]{<<key2>>}{<<short quote>>}<<.>>

would execute `\mktextquote` with the following arguments:

    \mktextquote{open}{<<short quote>>}{close}{}{}{\mkcitation{<<cite>>}}
    \mktextquote{open}{<<short quote>>}{close}{<<.>>}{}{\mkccitation{\cite[<<55>>]{<<key1>>}}}
    \mktextquote{open}{<<short quote>>}{close}{}{<<.>>}{\mkccitation{\cite[<<87>>]{<<key2>>}}}

where `\cite` is the command selected with `\SetCiteCommand` and
`open`/`close` are internal macros which print the opening and closing
quotation marks. Note that these internal macros are fully-fledged
markup elements with grouping and nesting control. They must be placed
in the correct order, otherwise `csquotes` will report errors about
unbalanced groups or invalidly nested quotations. Since the `text`
should obviously be enclosed in the quotation marks, the parameter order
`#1#2#3` is effectively fixed. The parameters `#4`, `#5`, `#6` may be
placed freely.
]]
  },
  openautoquote = {details = "$ref:csquotes.sty#/commands/closeautoquote/details"},
  openinnerquote = {details = "$ref:csquotes.sty#/commands/closeinnerquote/details"},
  setquotestyle = {
    arguments = {
      {delimiters = {"[", "]"}, meta = "variant", optional = true},
      {meta = "style"}
    },
    details = [[
```latex
\setquotestyle[variant]{style}
\setquotestyle{alias}
\setquotestyle*
```

The regular form of this command selects a quote style and disables
multilingual support. Its mandatory argument may be a quote style or an
alias. If it is a quote style, the optional argument indicates the style
variant. The starred version, which takes no arguments, enables
multilingual support. Please refer to ?? for a list of available styles,
style variants, and language aliases.
]]
  },
  textciquote = {
    details = [[
```latex
\textciquote Prints the closing inner quotation mark.
\textmiquote Prints the middle inner quotation mark.
```


]]
  },
  textcoquote = {
    details = [[
```latex
\textooquote Prints the opening outer quotation mark of the currently active quote style.
\textcoquote Prints the closing outer quotation mark.
\textmoquote Prints the middle outer quotation mark.
```


]]
  },
  textcquote = {
    arguments = {
      {literal = "*", optional = true},
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\textcquote[prenote][postnote]{key}[punct]{text}<tpunct>
\textcquote*[prenote][postnote]{key}[punct]{text}<tpunct>
```

The `text` may be any arbitrary piece of text to be enclosed in
quotation marks. The optional arguments `cite` and `punct` specify the
citation and any terminal punctuation of `text`. `tpunct` denotes
trailing punctuation after the command. If the `autopunct` option is
enabled, the quotation commands will scan ahead for punctuation marks
immediately following their last argument and can move them around if
required. See ?? on how to change the way these arguments are handled
and ?? for reasons why you may want to specify the punctuation as a
separate argument. The starred version of this command skips directly to
the inner quotation level. The remaining arguments are handed over to
`\cite`. Note that `\cite` normally supports one optional argument only.
`prenote` is only available in conjunction with the `natbib`, `jurabib`,
and `biblatex` packages. How these arguments are handled depends on the
citation command. With `natbib` and `biblatex`, `prenote` is in fact a
notice such as &lt;see>. With jurabib, this argument has a different
function by default. The argument `postnote`, which is always available,
indicates the citation postnote. This is usually a page number. `key` is
the citation key. See ?? on how to customize the citation.
]]
  },
  textelp = {
    arguments = {{literal = "*", optional = true}, {meta = "text"}},
    details = [[
```latex
\textelp{}
\textelp{text}
\textelp*{text}
```

When used with an empty `text` argument, this command prints an ellipsis
symbol to indicate the omission of material from the quoted material.
When used with a non-empty argument, the ellipsis symbol is followed by
the `text` enclosed in square brackets to indicate that the `text` has
been added after the omitted material. The starred version reverts the
order, i.e. it prints the `text` followed by an ellipsis symbol to
indicate that the `text` has been added before the omitted material. In
sum, there are three ways to use this command:

    [escapechar={\%},escapebegin={\rmfamily}]
    \textelp{}  %= \textelp{} %
    \textelp{text}  %= \textelp{text} %
    \textelp*{text} %= \textelp*{text} %

The insertion of text or individual letters may be indicated with the
following command:
]]
  },
  textins = {
    arguments = {{literal = "*", optional = true}, {meta = "text"}},
    details = [[
```latex
\textins*{text}
```

By default, `\textins` will enclose the `text` added to the quoted
material in square brackets. The starred version is intended for minor
changes, such as the capitalization of a word, which are required to
adapt the quoted material to the new context in which it is quoted.

    [escapechar={\%},escapebegin={\rmfamily}]
    \textins{text}  %= \textins{text} %
    \textins*{T}ext %= \textins*{T}ext %

The deletion of individual letters may be indicated with the following
command:
]]
  },
  textmiquote = {details = "$ref:csquotes.sty#/commands/textciquote/details"},
  textmoquote = {details = "$ref:csquotes.sty#/commands/textcoquote/details"},
  textooquote = {details = "$ref:csquotes.sty#/commands/textcoquote/details"},
  textquote = {
    arguments = {
      {literal = "*", optional = true},
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true},
      {meta = "text"}
    },
    details = [[
```latex
\textquote[cite][punct]{text}<tpunct>
\textquote*[cite][punct]{text}<tpunct>
```

The `text` may be any arbitrary piece of text to be enclosed in
quotation marks. The optional arguments `cite` and `punct` specify the
citation and any terminal punctuation of `text`. `tpunct` denotes
trailing punctuation after the command. If the `autopunct` option is
enabled, the quotation commands will scan ahead for punctuation marks
immediately following their last argument and can move them around if
required. See ?? on how to change the way these arguments are handled
and ?? for reasons why you may want to specify the punctuation as a
separate argument. The starred version of this command skips directly to
the inner quotation level. Here are some usage examples:

    \textquote{...}
    \textquote[][.]{...}
    \textquote[Doe 1990, 67]{...}
    \textquote[{\cite[67]{doe90}}]{...}

Note the use of the optional arguments in the examples above. As seen in
the second example, `cite` is required whenever `punct` is used, even if
it is empty. Also keep in mind that an optional argument containing
square brackets must be wrapped in an additional pair of curly braces as
shown in the last example. When working with automated citations, you
might also want to learn about the integrated quotation facilities
presented in ??.
]]
  },
  unspace = {
    details = [[
```latex
\unspace
```

Removes preceding whitespace, i.e. removes all skips and penalties from
the end of the current horizontal list.
]]
  }
}
environments = {
  displaycquote = {
    arguments = {
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true}
    },
    details = [[
```latex
\begin{displaycquote}[prenote][postnote]{key}[punct] ... \end{displaycquote}
```

The difference between `displaycquote` and its more basic counterpart is
that there are three citation arguments instead of one. The placement of
the citation is similar to `displayquote`. The handling of the citation
arguments is similar to `\textcquote`, see ?? for details. See ?? on how
to customize this environment. Also see ?? on how to change the way the
optional arguments are handled and ?? for reasons why you may want to
specify the punctuation as a separate argument. There are two
environments which combine `displaycquote` with the language switches of
the `babel` or the `polyglossia` package:
]]
  },
  displayquote = {
    arguments = {
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true}
    },
    details = [[
```latex
\begin{displayquote}[cite][punct] ... \end{displayquote}
```

The optional arguments `cite` and `punct` specify the citation and any
terminal punctuation of the quotation. See ?? on how to customize this
environment. Also see ?? on how to change the way the optional arguments
are handled and ?? for reasons why you may want to specify the
punctuation as a separate argument. Trailing white space at the end of
the environment is removed automatically. There are two additional
environments which combine `displayquote` with the language switches of
the `babel` or the `polyglossia` package:
]]
  },
  hyphendisplaycquote = {
    arguments = {
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "prenote", optional = true},
      {delimiters = {"[", "]"}, meta = "postnote", optional = true},
      {meta = "key"},
      {delimiters = {"[", "]"}, meta = "punct", optional = true}
    },
    details = [[
```latex
\begin{hyphendisplaycquote}{lang}[prenote][postnote]{key}[punct] ... \end{hyphendisplaycquote}
```

This environment combines `displaycquote` with `hyphenrules`. Apart from
the language, the arguments are handled as with `displaycquote`.
]]
  },
  hyphendisplayquote = {
    arguments = {
      {meta = "lang"},
      {delimiters = {"[", "]"}, meta = "cite", optional = true},
      {delimiters = {"[", "]"}, meta = "punct", optional = true}
    },
    details = [[
```latex
\begin{hyphendisplayquote}{lang}[cite][punct] ... \end{hyphendisplayquote}
```

This environment combines `displayquote` with `hyphenrules`. Apart from
the language, the arguments are handled as with `displayquote`.
]]
  }
}