=head1 SYNOPSIS

B<bib2gls> [I<option>]+ I<auxfile>

=head1 DESCRIPTION

B<bib2gls> is designed to work with the B<glossaries-extra> LaTeX
package. (The B<record> package option is required.) The application
performs two functions in one: (1) selects entries from .bib files
according to information found in the I<auxfile> (similar to
B<bibtex>); (2) hierarchically sorts entries and collates location
lists (similar to B<makeindex> and B<xindy>). The .aux extension may
be omitted from I<auxfile>.

The I<auxfile> (and corresponding .log file) should either be in the 
current directory or in the directory specified by B<--dir>. Bib files can 
either be relative to the directory the I<auxfile> is in
or in a location that can be found by kpsewhich.

=head1 OPTIONS

=over 4

=item B<--break-space>

Interpret C<~> (tilde) character and C<\nobreakspace> as a normal space.

=item B<--cite-as-record>

Treat C<\citation> as an ignored record.

=item B<--collapse-same-location-range>

Collapse an explicit range that has a duplicate start and end
location into a normal record (default).

=item B<--custom-packages> I<list>

Instruct the TeX parser library to attempt to parse the 
packages listed in I<list>. This is intended for simple custom
packages that don't contain complex code.

=item B<--debug> [I<n>]

Switch on the debug mode at the given setting I<n>, which
should be a non-negative integer. If I<n> is B<0> then the
debug mode is switched off. If omitted, I<n> is set to 1, which
corresponds to B<--debug-mode> B<io>. Any positive number will
enable all of B<bib2gls>'s debugging messages. The amount of
TeX Parser Library debugging messages depends on bitwise operation of I<n>.

=item B<--debug-mode> I<setting>

May be used instead of B<--debug> where the level number is
difficult to remember. The I<setting> may be a comma-separated list
of any of the keywords:

=over 4

=item B<all>

Highest level (likely to result in a large transcript file). Equivalent to
switching on all settings.

=item B<catcode>

TeX Parser category code changes.

=item B<cs>

TeX Parser command definitions.

=item B<decl>

TeX Parser declarations.

=item B<expansion>

TeX Parser expansions (may result in a large transcript file).

=item B<expansion-list>

TeX Parser stack expansions (may result in a large transcript file).

=item B<expansion-once>

TeX Parser one-level expansions.

=item B<expansion-once-list>

TeX Parser one-level list expansions.

=item B<io>

TeX Parser I/O operations (open, close and fetch token).

=item B<popped>

TeX Parser stack popping.

=item B<process>

TeX Parser macro process (may result in a large transcript file).

=item B<process-generic-cs>

TeX Parser generic command process.

=item B<process-stack>

TeX Parser stack process (may result in a large transcript file).

=item B<process-stack-list>

TeX Parser detailed stack process (may result in a large transcript file).

=item B<read>

TeX Parser codepoint read from file (likely to result in a large
transcript file).

=item B<sty-data>

TeX Parser data (typically relates to internal objects that don't
have an analogous TeX macro). This includes data gathered from the
aux file.

=back

For example: C<bib2gls --debug-mode io,catcode,sty-data mydoc>

=item B<--default-encoding> I<name>

Set the default character encoding for input and output files.
If omitted, the JVM default encoding is assumed.

=item B<--dir> I<directory> (or B<-d> <directory>)

Files are relative to I<directory>. (This doesn't change the current
working directory.)

=item B<--expand-fields>

Don't write C<\glsnoexpandfields> to the F<.glstex> file.

=item B<--force-cross-resource-refs> or B<-x>

Force cross-resource referencing mode on.

=item B<--group> or B<-g>

Add B<group> field to entries.

=item B<--help> or B<-h>

Display help message and exit.

=item B<--ignore-packages> I<list> (or B<-k> I<list>)

Don't parse the log file for the packages listed in I<list>. Note
that B<--packages> overrides this option, so if the same package is
listed in both B<--ignore-packages> and B<--packages> then the
interpreter will check if it's supported. This option has a
cumulative action. Only known packages may be included in
I<list>.

=item B<--interpret>

Use the TeX Parser Library to interpret known (La)TeX commands
(default).

=item B<--list-known-packages>

Lists all the packages that have are known to the TeX parser
library and then exits (with exit code 0). Any of the listed
packages may be used in B<--packages> or B<--ignore-packages>.

=item B<--locale> I<lang> (or B<-l> I<lang>)

Use language resource file for I<lang> (which should be an IETF
locale tag). 

=item B<--log-encoding> I<name>

Set the character encoding for the F<log> files (which may not be
the same as the encoding for the document LaTeX files). 

=item B<--log-file> I<file> (or B<-t> <file>)

Set the transcript file.

=item B<--merge-nameref-on> I<rule>

Rule for merging locations created with the B<record=nameref> package option
(requires F<glossaries-extra.sty> version 1.37+). The I<rule> may be
one of: B<hcounter>, B<href>, B<title> or B<location>.

=item B<--merge-wrglossary-records>

Merge an entry's B<wrglossary> records for the same page locations.
(For use with the B<indexcounter> package option.)

=item B<--mfirstuc-math-protection>

Switch on the auto-insertion of an empty group for math-shift (C<$>).

If F<mfirstuc> v2.08+, F<glossaries> v4.50+ and F<glossaries-extra> v1.49+ 
are detected, the default will be B<--no-mfirstuc-math-protection>
as there should no longer be any need for this protection.

=item B<--mfirstuc-protection> I<fields>|B<all> (or B<-u> I<fields>|B<all>)

Insert an empty group if fields start with certain problematic
commands to protect against case-changing commands like C<\Gls>.

The default is to do this for all fields.  To do this for only a
subset of fields, set I<fields> to a comma-separated list of fields
(e.g. B<name,short,long>).  The keyword B<all> indicates all fields.

If F<mfirstuc> v2.08+, F<glossaries> v4.50+ and F<glossaries-extra> v1.49+ 
are detected, the default will be B<--no-mfirstuc-protection>
as there should no longer be any need for this protection.

=item B<--nested-link-check> I<list>|B<none>

Check each field listed in I<list> for potentially problematic
nested link text. (Default list: name, text, plural, first,
firstplural, short, shortplural, long, longplural, symbol).

If B<none>, disable check.

=item B<--no-break-space>

Interpret C<~> (tilde) and C<\nobreakspace> as a non-breaking space (default).

=item B<--no-cite-as-record>

Don't check for instances of C<\citation> in the F<.aux> file (default).

=item B<--no-collapse-same-location-range>

Don't collapse an explicit range that has a duplicate start and end
location into a normal record.

=item B<--no-debug> (or B<--nodebug>)

Switch off debug mode. (Equivalent to B<--debug> B<0>)

=item B<--no-expand-fields>

Write C<\glsnoexpandfields> to the F<.glstex> file (default).

=item B<--no-force-cross-resource-refs>

Don't force cross-resource referencing mode on (default).

=item B<--no-group>

Don't add B<group> field to entries (default).

=item B<--no-interpret>

Don't try interpreting (La)TeX commands. The TeX Parser Library will
still be used to parse the F<aux> and F<bib> files.

=item B<--no-merge-wrglossary-records>

Don't merge an entry's B<wrglossary> records.

=item B<--no-mfirstuc-math-protection>

Switch off the auto-insertion of an empty group for math-shift (C<$>).

=item B<--no-mfirstuc-protection>

Switch off the auto-insertion of an empty group for all fields.

=item B<--no-nested-link-check>

Don't check for potentially problematic nested link text.
(Equivalent to B<--nested-link-check> B<none>)

=item B<--no-obey-aux-catcode>

Ignore category code changing commands encountered in the aux file.

=item B<--no-provide-glossaries>

Don't write C<\provideignoredglossary*> to the F<.glstex> file to
provide unknown glossaries except in documented situations
(B<master>, B<secondary> and B<trigger-type> resource options).
This setting is the default.

=item B<--no-record-count>

Don't add record count field to entries (default).
This option automatically implements B<--no-record-count-unit>.

=item B<--no-record-count-unit>

Don't add unit record count field to entries (default).

=item B<--no-replace-quotes>

Don't replace quote characters (default).

=item B<--no-retain-formats>

Normal location merging rules apply (default).

=item B<--no-support-unicode-script>

Text superscript (C<\textsuperscript>) or subscripts (C<\textsubscript>)
won't be converted to Unicode superscript/subscript characters.
For example, C<\textsuperscript{2}> will be converted to C<E<lt>supE<gt>2E<lt>/supE<gt>>
and the markup will be stripped leaving just the character 2.

=item B<--no-trim-fields>

Don't trim leading and trailing spaces from fields (default).
This option cancels B<--trim-only-fields> and B<--trim-fields>.

=item B<--no-verbose> (or B<--noverbose>)

Switch off verbose mode. (Some messages will still be written to
STDOUT.)

=item B<--no-warn-non-bib-fields>

Don't warn if internal non-bib fields are found in the F<.bib> file.
The use of these internal fields can cause unexpected results, so
only use this option if you have taken appropriate precautions.

=item B<--no-warn-unknown-entry-types>

Don't warn if any unknown entry types are found in the F<.bib> file.

=item B<--obey-aux-catcode>

Obey known category code changing commands encountered in the aux
file.

=item B<--packages> I<list> (or B<-p> I<list>)

Instruct the TeX parser library to pretend the packages listed 
in I<list> have been used by the document. Note that there's only a
limited number of packages supported by the TeX parser library.
This option has a cumulative action so B<--packages wasysym,pifont>
is the same as B<--packages wasysym --packages pifont>.

You can find out the list of supported packages with
B<--list-known-packages>.

=item B<--provide-glossaries>

Write C<\provideignoredglossary*> to the F<.glstex> file to provide
unknown glossaries.

=item B<--quiet> (or B<-q>)

Only display error messages. All other messages are just written to
the transcript file.

=item B<--record-count> or B<-c>

Add record count fields to entries.

=item B<--record-count-rule> I<rule> or B<-r> I<rule>

Sets the rule used by B<--record-count> and B<--record-count-unit>.
This option automatically implements B<--record-count>.

The I<rule> may be: C<all> or C<a> (count all records), 
C<non-ignored> or C<n> (count all non-ignored records), 
C<f/>I<regex>C</> (only count records where the format 
matches the regular expression I<regex>),
C<c/>I<regex>C</> (only count records where the counter name 
matches the regular expression I<regex>),
or C<f/>I<regex1>C</c/>I<regex2>C</>I<op> (only count records where the format 
matches the regular expression I<regex1> and/or the counter name 
matches the regular expression I<regex2>). The I<op> part is
optional. If present it may be one of: C<and> (format AND counter
must match), C<or> (format OR counter must match). If I<op> is
omitted, AND is assumed.

=item B<--record-count-unit> or B<-n>

Add unit record count fields to entries.
This option automatically implements B<--record-count>.

=item B<--replace-quotes>

Replace single and double quote characters (C<'> and C<">) with 
C<\bibglsaposchar> and C<\bibglsdoublequotechar> in field values
and group information written to the F<.glstex> file.

=item B<--retain-formats> I<list>

Indicates which location formats should always be retained even if
it causes a partial duplicate. Only exact duplicates will be merged.

=item B<--shortcuts> I<option>

Check for the shortcut commands when searching for dependencies.
Permitted values of I<option>: B<acronyms> (or B<acro>), B<ac>,
B<abbreviations> (or B<abbr>), B<all> (or B<true>), B<none> (or
B<false>). This overrides the setting given in I<auxfile>.

=item B<--map-format> I<key>B<:>I<value>[B<,>I<key>B<:>I<value>]* (or 
B<-m> I<key>B<:>I<value>[B<,>I<key>B<:>I<value>]*)

Set location format mappings.

=item B<--silent>

Only display error messages. All other messages are just written to
the transcript file. (Synonym of B<--quiet>.)

=item B<--support-unicode-script>

Text superscript (C<\textsuperscript>) or subscripts (C<\textsubscript>)
will use Unicode superscript/subscript characters if available.
For example, C<\textsuperscript{2}> will be converted to U+00B2
(superscript two).

=item B<--tex-encoding> I<name>

Set the character encoding for the F<glstex> files. This overrides the
setting given in I<auxfile>.

=item B<--trim-except-fields> I<list>

Trim leading and trailing spaces from all fields except those listed.
This option is cumulative but is cancelled by B<--trim-fields>
and B<--no-trim-fields>. This option may not be used with
B<--trim-only-fields>.

=item B<--trim-fields>

Trim leading and trailing spaces from all fields.
This option cancels B<--trim-only-fields> and B<--no-trim-fields>.

=item B<--trim-only-fields> I<list>

Trim leading and trailing spaces from only the listed fields.
This option is cumulative but is cancelled by B<--trim-fields>
and B<--no-trim-fields>. This option may not be used with
B<--trim-except-fields>.

=item B<--verbose>

Switch on verbose mode.

=item B<--version> or B<-v>

Display version information and exit.

=item B<--warn-non-bib-fields>

Warn if internal non-bib fields are found in the F<.bib> file.

=item B<--warn-unknown-entry-types>

Warn if any unknown entry types are found in the F<.bib> file.

=back

=head1 REQUIRES

Java 8 or later and a TeX distribution.

=head1 LICENSE

License GPLv3+: GNU GPL version 3 or later
L<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

=head1 RECOMMENDED READING

The bib2gls manual:

        texdoc bib2gls

The glossaries-extra manual:

        texdoc glossaries-extra

The glossaries manual:

        texdoc glossaries

=head1 AUTHOR

Nicola L. C. Talbot,
L<https://www.dickimaw-books.com/>

=cut

