%%% ====================================================================
%%%  @LaTeX-style-file{
%%%     author          = "Alan Jeffrey",
%%%     version         = "1.1",
%%%     date            = "02 June 1992",
%%%     time            = "14:51:35 BST",
%%%     filename        = "module.sty",
%%%     address         = "School of Cognitive and Computing Sciences
%%%                        University of Sussex
%%%                        Brighton BN1 9QH
%%%                        UK",
%%%     telephone       = "+44 273 606755 x 3238",
%%%     FAX             = "+44 273 678188",
%%%     checksum        = "59444 265 1437 10221",
%%%     email           = "alanje@cogs.sussex.ac.uk",
%%%     codetable       = "ISO/ASCII",
%%%     keywords        = "LaTeX module fonts",
%%%     supported       = "yes",
%%%     abstract        = "This is a document style option for
%%%                        modularizing definitions",
%%%     docstring       = "This is a document style option for
%%%                        modularizing definitions.  It is part of
%%%                        the St Mary's Road font package, described
%%%                        in stmaryrd.tex.
%%%
%%%                        Copyright 1992 Alan Jeffrey.
%%%
%%%                        The checksum field above contains a CRC-16
%%%                        checksum as the first value, followed by the
%%%                        equivalent of the standard UNIX wc (word
%%%                        count) utility output of lines, words, and
%%%                        characters.  This is produced by Robert
%%%                        Solovay's checksum utility.",
%%%     package         = "St Mary's Road",
%%%     dependencies    = "none",
%%%  }
%%%
%%%  ====================================================================
%%%
%%% 23 May 1991, v1.0: Created file.
%%%
%%% 24 May 1991, v1.01: Hacked around with it quite a bit, redefined how
%%%    \iftag...\fi works, allowed \else, \isunsettag and conjunction.
%%%    Came up with the \modulefredloaded trick, implimented the settags
%%%    environment, rewrote some of the comments, defined tags so that
%%%    using one as a command causes an error message, changed the syntax
%%%    of \ifdef, and generally nicened it up a bit.
%%%
%%% 25 May 1991, v1.02: More hackery.  Renamed \iftag to \iftest ... \then, and
%%%    reimplemented it.  Renamed \issettag to \tagisset, ditto
%%%    \tagisunset.  Introduced \truetest, \falsetest, \andtest, \ortest,
%%%    \nottest and \newfontselection.  Went back to the original syntax
%%%    for \ifdef.
%%%
%%% 2 Jun 1992, v1.1: Added the file headers.

% This style allows you to define modules for LaTeX, which the user can
% then use all or none of, depending on their fancy.  This is mainly
% useful for loading in new symbol fonts, which may define over 200 new
% commands, of which the user only wants a handful.  At the moment, the
% AMS gets round this by defining a command \newsymbol, but here we
% present a more user-friendly way of getting the same effect.
%
% The main concept the user needs is that of a {\em tag\/} which is a
% request to a module saying `please give me this facility'.  Usually
% these are just command names that the module will define---for
% example the module stmaryrd has tags \varoplus, \bindnasrepma, and so
% on.  But there are other tags which control how the module behaves,
% for example the tag \substitutefonts means `We don't have the
% necessary fonts, please use substitutes instead.'
%
% To set the tag \foo, you say \settag{\foo}.  To set \foo, \baz and
% \bar, you can say \begin{settags} \foo\baz\bar \end{settags}.
%
% To unset the tag \foo, you say \unsettag{\foo}.  To unset \foo, \baz
% and \bar, you can say \begin{unsettags} \foo\baz\bar \end{unsettags}.
%
% You can then import a module.  This can be done in various ways:
%
% a) By saying \import{fred}, which only loads the commands whose tags
%    you set.
%
% b) By saying \import*{fred}, which loads in all the commands.
%
% c) As a \documentstyle option, e.g. \documentstyle[module,fred]{article}.
%    This is equivalent to \import*{fred}.
%
% And that's it.

% This all works by keeping a file fred.sty, which is loaded in when fred
% is imported.  This can have any sort of definition you like (including the
% character @, which is made into a letter for the occasion).  It should
% include a command:
%
%    \settag\modulefredloaded
%
% to tell other modules (including itself) that fred.sty has been loaded.
% You also get a special command:
%
%    \iftest <test> \then <true text>  \fi
%
% or
%
%    \iftest <test> \then <true text> \else <false text> \fi
%
% meaning `if the test is true, do the true text, otherwise do
% the false text.'  A test is of the form
%
%    \truetest
%    \falsetest
%    \tagisset<tag>
%    \ortest{<test>}{<test>}
%    \andtest{<test>}{<test>}
%    \nottest{<test>}
%
% For example, there is a special tag called \everything, which is set if we
% are meant to define every command we can.  So if we are defining a
% command \fred, we would like to test if either \fred or \everything has
% been set.  We can do this by saying
%
%    \iftest \ortest{\tagisset\fred}{\tagisset\everything} \then \def\foo... \fi
%
% This is so common as to warrant its own syntactic sugar:
%
%    \ifdef \then \def\foo... \fi
%
% You can also say \ifdef\then\mathchardef\foo...\fi,
% \ifdef\then\let\foo...\fi, or any other defining command.  Since
% these are so common in modules, I've included the extra commands:
%
%    \delimiterdef\foo"1234567  \textchardef\foo"123
%
% Another common usage is
%
%    \iftest \tagisset\foo \then \settag\baz \fi
%
% meaning `If we are exporting \foo, we should export \baz as well.'
% This sort of dependency information is so common as to warrant its own
% syntactic sugar:
%
%    \dependent\foo\baz
%
% Note that since modules may well be loaded in more than once, you have
% to make sure your commands can be obeyed many times.  To get round
% this, the module `fred' can look at the value of \modulefredloaded to
% see whether or not it's been loaded before.  For example, if you have
% some sensitive definitions (such as loading fonts) which shoudn't be
% done more than once, you can say (before setting \modulefredloaded):
%
%    \iftest \tagisunset\modulefredloaded \then ...sensitive material... \fi
%
% If your module does some font loading, it can look at the tag
% \newfontselection to see whether the new font selection scheme has been
% installed.

% So how is this all done?  Well, the name of the game is to use TeX's
% primitive \if ... \fi constructs in such a way that they always group
% nicely.  So a <test> is a command that expands out to either \iftrue
% or \iffalse.  NB: \iffalse and \iftrue are *not* valid tests, as they'd
% foul up the \if...\fi matching.

\def\truetest{\iftrue}
\def\falsetest{\iffalse}

\def\ortest#1{#1\expandafter\K@true\else\expandafter\@identity\fi}
\def\@identity#1{#1}
\def\K@true#1{\iftrue}

\def\andtest#1#2{#1\@fi#2}
\def\@fi{\fi}

\def\nottest#1{#1\expandafter\falsetest\else\expandafter\truetest\fi}

% Then all that \iftest...\then has to do is expand out the test.

\def\iftest#1\then{#1}

% In order to make sure that \if ... \fi matching works properly, we need
% to define \then to be an \if-like command.

\let\then\iftrue

% To test whether a tag is set or not we just look to see if it
% is the same as \magic@value.

\def\tagisset#1{\ifx\magic@value#1}

% So to set a tag, we just \let it to \magic@value.

\def\settag#1{\let#1\magic@value}
\def\unsettag#1{\let#1\unmagic@value}

% If the user says something like \settag\foo \import{fred} but fred
% doesn't define \foo, we'd like some way of failing gracefully.  We do
% this by defining \magic@value and \unmagic@value to produce error messages.

\def\magic@value{\set@error}
\def\set@error{\@latexerr{This command is a set tag}{You just used a tag
   where LaTeX expected an ordinary command.^^JIf you press return now, I'll
   ignore the tag.^^JSee `A module system for LaTeX' by Alan Jeffrey for
   details.}}

\def\unmagic@value{\unset@error}
\def\unset@error{\@latexerr{This command is an unset tag}{You just used a tag
   where LaTeX expected an ordinary command.^^JIf you press return now, I'll
   ignore the tag.^^JSee `A module system for LaTeX' by Alan Jeffrey for
   details.}}

% Then \ifdef and \dependent are just syntactic sugar, speeded up a bit.

\def\ifdef\then#1#2%
   {\tagisset\everything\expandafter\iftrue
      \else\expandafter\tagisset\expandafter#2\fi#1#2}
\def\dependent#1#2%
   {\tagisset#1\settag#2\fi}

% The settags and unsettags environments:

\def\settags#1%
   {\ifx#1\end\expandafter\end\else\settag#1\expandafter\settags\fi}
\def\unsettags#1%
   {\ifx#1\end\expandafter\end\else\unsettag#1\expandafter\unsettags\fi}

% The trouble with \import is getting it to save the current values of
% \everything and the catcode for @ correctly.  Oh, if only I could
% use TeX grouping for this, but I can't, because the font selection
% scheme doesn't allow you to load fonts globally.  Oh well.

\def\import
   {\@ifstar{\@import\settag}{\@import\unsettag}}
\def\@import#1#2%
   {\tagisset\everything
      \def\next{\@@import{#2}\settag\everything}\else
         \def\next{\@@import{#2}\unsettag\everything}\fi
      #1\everything\next}
\def\@@import#1%
   {\edef\next{\noexpand\@@input #1.sty
      \catcode`\noexpand\@\the\catcode`\@}\makeatletter\next}

% We need to set \everything initially, so that if a module is read in
% as a .sty file, it behaves like \import*{fred}.

\settag\everything

% And to be a well-behaved module, we should set \modulemoduleloaded.

\settag\modulemoduleloaded

% Look to see if \selectfont is defined (as a check for whether we're
% using the new font selection scheme).

\@ifundefined{selectfont}{}{\settag\newfontselection}

% Old-fashioned LaTeX didn't have this:

\def\hexnumber@#1{\ifcase#1 \z@
 \or \@ne \or \tw@ \or \thr@@
 \or 4\or 5\or 6\or 7\or 8\or
 9\or A\or B\or C\or D\or E\or F\fi}

% A few extra commands for definitions:

\def\textchardef#1"#2#3#4{\edef#1{\noexpand\mathhexbox#2#3#4}}
\def\delimiterdef#1"#2#3#4#5#6#7#8{\edef#1{\delimiter"#2#3#4#5#6#7#8 }}

% And that's that.