% !TEX program = pdflatex % !TEX ext = --interaction=nonstopmode --enable-etex --enable-write18 % !BIB program = none %%%============================================================================== %% Copyright 2023 by Alceu Frigeri %% %% This work may be distributed and/or modified under the conditions of %% %% * The [LaTeX Project Public License](http://www.latex-project.org/lppl.txt), %% version 1.3c (or later), and/or %% * The [GNU Affero General Public License](https://www.gnu.org/licenses/agpl-3.0.html), %% version 3 (or later) %% %% This work has the LPPL maintenance status *maintained*. %% %% The Current Maintainer of this work is Alceu Frigeri %% %% This is version 1.1 (2023/05/16) %% %% The list of files that compose this work can be found in the README.md file at %% https://ctan.org/pkg/codedescribe %% %%%============================================================================== %\documentclass[dctools,english]{ufrgscca} \documentclass{article} \RequirePackage[verbose,a4paper,marginparwidth=28mm,top=3cm,bottom=1.5cm,hmargin={45mm,25mm},marginparsep=2.5mm,columnsep=10mm,asymmetric]{geometry} \usepackage{codedescribe} \usepackage{enumitem} \begin{document} %%% TO BE DETERMINED !! \parindent %%%\setlength\parindent{0pt} \tstitle{ author={Alceu Frigeri\footnote{\tsverb{https://github.com/alceu-frigeri/codedescribe}}}, date={\tsdate}, title={The codedescribe and codelisting Packages\break Version \PkgInfo{codedescribe}{version}} } \begin{typesetabstract} This documentation package is designed to be `as class independent as possible', depending only on \tsobj[pkg]{expl3,scontents,listing,pifont}. Unlike other packages of the kind, a minimal set of macros/commands/environments is defined: most/all defined commands have an 'object type' as a \tsobj[key]{keyval} parameter, allowing for an easy expansion mechanism (instead of the usual 'one set of macros/environments' for each object type). No assumption about page layout is made (besides `having a marginpar'), or underlying macros, so that it can be used with any document class. \end{typesetabstract} \tableofcontents \section{Introduction} This package aims to document both \tsobj[code]{Document} level (i.e. final user) commands, as well \tsobj[code]{Package/Class} level commands. It's fully implemented using \tsobj[pkg]{expl3} syntax and structures, in special \tsobj[pkg]{l3coffins, l3seq, l3keys}. Besides those \tsobj[pkg]{scontents,listing} packages are used to typeset code snippets. The package \tsobj[pkg]{pifont} is needed just to typeset those (open)stars, in case one wants to mark a command as (restricted) expandable. No other package/class is needed, any class can be used as the base one, which allows to demonstrate the documented commands with any desired layout. \tsobj[pkg]{codelisting} defines a few macros to display and demonstrate \LaTeX~ code (using \tsobj[pkg]{listings} and \tsobj[pkg]{scontents}), whilst \tsobj[pkg]{codedescribe} defines a series of macros to display/enumerate macros and environments (somewhat resembling the \tsobj[pkg]{doc3} style). \subsection{Single versus Multi-column Classes} This package 'can' be used with multi-column classes, given that the \tsobj[code]{\linewidth,\columnsep} are defined appropriately. \tsobj{\linewidth} shall defaults to text/column real width, whilst \tsobj{\columnsep}, if needed (2 or more columns) shall be greater than \tsobj{\marginparwidth} plus \tsobj{\marginparsep}. \subsection{Current Version} This doc regards to \tsobj[pkg]{codedescribe} version \PkgInfo{codedescribe}{version}~ and \tsobj[pkg]{codelisting} version \PkgInfo{codelisting}{version}. Those two packages are fairly stable, and given the \tsobj[meta]{obj-type} mechanism (see below, \ref{obj-type-def}) it can be easily extended without changing it's interface. \section{codelisting Package} It requires two packages: \tsobj[pkg]{listings,scontents}, defines an environment: \tsobj[env]{codestore} and 2 main commands: \tsobj[code]{\tscode,\tsdemo} and 1 auxiliary command: \tsobj{\setcodekeys}. \subsection{In Memory Code Storage} Thanks to \tsobj[pkg]{scontents} (\tsobj[pkg]{expl3} based) it's possible to store \LaTeX~ code snippets in a \tsobj[pkg]{expl3} key. \begin{codedescribe}[env,rulecolor=white]{codestore} \begin{codesyntax} \tsmacro{\begin{codestore}}[stcontents-keys]{} \tsmacro{\end{codestore}}{} \end{codesyntax} This environment is an alias to \tsobj[env]{scontents} environment (from \tsobj[pkg]{scontents} package), all \tsobj[pkg]{scontents} keys are valid, with two additional ones: \tsobj[key]{st,store-at} which are aliases to the \tsobj[key]{store-env} key. If an 'isolated' \tsobj[key,meta]{st-name} is given (unknown \tsobj[key]{key}), it is assumed 'by Default' that the environment body shall be stored in it (for use with \tsobj[code]{\tscode,\tsdemo}). \end{codedescribe} \subsection{Code Display/Demo}\label{codelist} \begin{codedescribe}{\setcodekeys} \begin{codesyntax}% \tsmacro{\setcodekeys}{code-keys} \end{codesyntax} One has the option to set \tsmeta{code-keys} (see \ref{code-keys}) per \tsmacro{\tscode}{}/\tsmacro{\tsdemo}{} call, or \emph{globally}, better said, \emph{in the called context group} .\\ \begin{tsremark}[N.B.:] All \tsobj[code]{\tscode,\tsdemo} commands create a local group in which the \tsmeta{code-keys} are defined, and discarded once said local group is closed. \tsmacro{\setcodekeys}{} defines those keys in the \emph{current} context/group. \end{tsremark} \end{codedescribe} \begin{codedescribe}{\tscode*,\tsdemo*} \begin{codesyntax}% \tsmacro{\tscode*}[code-keys]{st-name} \tsmacro{\tsdemo*}[code-keys]{st-name} \end{codesyntax} \tsmacro{\tscode}{} just typesets \tsobj[meta]{st-name} (the key-name created with \tsobj[env]{stcode}), in verbatim mode with syntax highlight. The non-star version centers it and use just half of the base line. The star version uses the full text width. \tsmacro{\tsdemo*}{} first typesets \tsobj[meta]{st-name}, as above, then it \emph{executes} said code. The non-start versions place them side-by-side, whilst the star versions places one following the other. \end{codedescribe} For Example: \begin{codestore}[st=democodestore] \begin{codestore}[stmeta] Some \LaTeX~coding, for example: \ldots. \end{codestore} This will just typesets \tsobj[key]{stmeta}: \tscode*[codeprefix={Sample Code:}] {stmeta} and this will demonstrate it, side by side with source code: \tsdemo[numbers=left,ruleht=0.5, codeprefix={inner sample code}, resultprefix={inner sample result}] {stmeta} \end{codestore} \tsdemo*[emph2={tscode,tsdemo},emph={stmeta},keywd2={codestore}]{democodestore} \subsubsection{Code Keys}\label{code-keys} Using a \tsobj[key]{key}\,=\tsobj[value]{value} syntax, one can fine tune \tsobj[pkg]{listings} syntax highlight. \begin{codedescribe}[key]{settexcs,texcs,texcsstyle} \begin{codesyntax}% Also \tsobj[key]{settexcs,settexcs2,settexcs3} \tsobj[key]{texcs,texcs2,texcs3} \tsobj[key]{texcsstyle,texcs2style,texcs3style} \end{codesyntax} Those define sets of \LaTeX~commands (csnames), the \tsobj[key]{set} variants initialize/redefine those sets (an empty list, clears the set), while the others extend those sets. The \tsobj[key]{style} ones redefines the command display style (an empty \tsobj[meta]{value} resets the style to it's default).\\ \end{codedescribe} \begin{codedescribe}[key]{setkeywd,keywd,keywdstyle} \begin{codesyntax} % \tsobj[key]{setkeywd,setkeywd2,setkeywd3} \tsobj[key]{keywd,keywd2,keywd3} \tsobj[key]{keywdstyle,keywd2style,keywd3style} \end{codesyntax} Same for other \emph{keywords} sets.\\ \end{codedescribe} \begin{codedescribe}[key]{setemph,emph,emphstyle} \begin{codesyntax} % \tsobj[key]{setemph,setemph2,setemph3} \tsobj[key]{emph,emph2,emph3} \tsobj[key]{emphstyle,emph2style,emph3style} \end{codesyntax} for some extra emphasis sets.\\ \end{codedescribe} \begin{codedescribe}[key]{numbers,numberstyle} \begin{codesyntax} % \tsobj[key]{numbers,numberstyle} \end{codesyntax} \tsobj[key]{numbers} possible values are \tsobj[value]{none} (default) and \tsobj[value]{left} (to add tinny numbers to the left of the listing). With \tsobj[key]{numberstyle} one can redefine the numbering style.\\ \end{codedescribe} \begin{codedescribe}[key]{stringstyle,codestyle} \begin{codesyntax} % \tsobj[key]{stringstyle,commentstyle} \end{codesyntax} to redefine \tsobj[key]{strings} and \tsobj[key]{comments} formatting style.\\ \end{codedescribe} \begin{codedescribe}[key]{bckgndcolor} \begin{codesyntax} % \tsobj[key]{bckgndcolor} \end{codesyntax} to change the listing background's color.\\ \end{codedescribe} \begin{codedescribe}[key]{codeprefix,resultprefix} \begin{codesyntax} % \tsobj[key]{codeprefix,resultprefix} \end{codesyntax} those set the \tsobj[key]{codeprefix} (default: \LaTeX~Code:) and \tsobj[key]{resultprefix} (default: \LaTeX~Result:) \end{codedescribe} \begin{codedescribe}[key]{parindent} \begin{codesyntax} % \tsobj[key]{parindent} \end{codesyntax} Sets the indentation to be used when 'demonstrating' \LaTeX\ code (\tsobj[code]{\tsdemo}). Defaults to whatever value \tsobj[code]{\parindent} was when the package was first loaded. \end{codedescribe} \begin{codedescribe}[key]{ruleht}%-very-long-long-long,xyz,xyh,kjh,ljd,kls} \begin{codesyntax} % \tsobj[key]{ruleht} \end{codesyntax} When typesetting the 'code demo' (\tsobj{\tsdemo}) a set of rules is drawn. The Default, 1, equals to \tsobj{\arrayrulewidth} (usually 0.4pt). \end{codedescribe} \section{codedescribe Package} This package aims at minimizing the number of commands, having the object kind (if a macro, or a function, or environment, or variable, or key ...) as a parameter, allowing for a simple 'extension mechanism': other object types can be easily introduced without having to change, or add commands. \subsection{Package Options} It has a single package option: \begin{describelist}{option} \describe{nolisting}{it will suppress the \tsobj[pkg]{codelisting} package load. In case it's not necessary or one wants to use a differen package for \LaTeX\ code listing.} \end{describelist} \subsection{Object Type keys}\label{obj-type-def} The applied text format is defined in terms of \tsobj[arg]{obj-types}, which are defined in terms of \tsobj[arg]{format-groups} and each one defines a 'formatting function', 'font shape', bracketing, etc. to be applied. \subsubsection{Format Keys}\label{format-keys} There is a set of primitive \tsobj[arg]{format-keys} used to define \tsobj[arg]{format-groups,obj-types}, which are: \begin{describelist*}{keys} \describe {meta} { to typeset between angles,} \describe {xmeta} { to typeset *verbatim* between angles,} \describe {verb} { to typeset *verbatim*,} \describe {xverb} { to typeset *verbatim*, suppressing all spaces,} \describe {code} { to typeset *verbatim*, suppressing all spaces and replacing a TF by \underline{TF},} \describe {nofmt} { in case of a redefinition, to remove the 'base' formatting,} \describe {slshape} { to use a slanted font shape,} \describe {itshape} { to use an italic font shape,} \describe {noshape} { in case of a redefinition, to remove the 'base' shape,} \describe {lbracket} { defines the left bracket (when using \tsobj{\tsargs}). \textbf{Note:} this key must have an associated value,} \describe {rbracket} { defines the right bracket (when using \tsobj{\tsargs}). \textbf{Note:} this key must have an associated value,} \describe {color} { defines the text color. \textbf{Note:} this key must have an associated value (a color, as understood by \tsobj[pkg]{xcolor} package).} \end{describelist*} \subsubsection{Format Groups} Using \tsobj{\defgroupfmt} one can (re-)define custom \tsobj[arg]{format-groups}. There is, though, a set of pre-defined ones as follow: \begin{describelist*}{keys} \describe {meta} {which sets \tsobj[keys]{meta,color}} \describe {verb} {which sets \tsobj[keys]{color}} \describe {oarg} {which sets \tsobj[keys]{meta,color}} \describe {code} {which sets \tsobj[keys]{code,color}} \describe {syntax} {which sets \tsobj[keys]{color}} \describe {keyval} {which sets \tsobj[keys]{slshape,color}} \describe {option} {which sets \tsobj[keys]{color}} \describe {defaultval} {which sets \tsobj[keys]{color}} \describe {env} {which sets \tsobj[keys]{slshape,color}} \describe {pkg} {which sets \tsobj[keys]{slshape,color}} \end{describelist*} \begin{tsremark} \tsobj[keys]{color} was used in the list above just as a 'reminder' that a color is defined/associated with the given group. \end{tsremark} \subsubsection{Object Types} Using \tsobj{\defobjectfmt} one can (re-)define custom \tsobj[arg]{obj-types}. Similarly, there is a set of predefined ones, as follow: \begin{describelist*}{keys} \describe {arg, meta} {based on (group) \tsobj[key]{meta}} \describe {verb, xverb} {based on (group) \tsobj[key]{verb} plus \tsobj[key,sep=or]{verb,xverb}} \describe {marg} {based on (group) \tsobj[key]{meta} plus brackets} \describe {oarg, parg, xarg} {based on (group) \tsobj[key]{oarg} plus brackets} \describe {code, macro, function} {based on (group) \tsobj[key]{code}} \describe {syntax} {based on (group) \tsobj[key]{syntax}} \describe {keyval, key, keys, values} {based on (group) \tsobj[key]{keyval}} \describe {option} {based on (group) \tsobj[key]{option}} \describe {defaultval} {based on (group) \tsobj[key]{defaultval}} \describe {env} {based on (group) \tsobj[key]{env}} \describe {pkg, pack} {based on (group) \tsobj[key]{pkg}} \end{describelist*} \subsubsection{Customization}\label{format-custom} One can add user defined groups/objects or change the pre-defined ones with the following commands: \begin{codedescribe}[code,new=2023/05/16]{\defgroupfmt} \begin{codesyntax} % \tsmacro{\defgroupfmt}{format-group,format-keys} \end{codesyntax} \tsobj[marg]{format-group} is the name of the new group (or one being redefined, which can be one of the standard ones). \tsobj[marg]{format-keys} is any combination of the keys defined in \ref{format-keys} \end{codedescribe} For example, one can redefine the \tsobj[key]{code group} standard color with \tsobj{\defgroupfmt{code}{color=red}} and all \tsobj[key]{obj-types} based on it will be typeset in red (in the standard case: \tsobj[key]{code, macro, function} objects). \begin{codedescribe}[code,new=2023/05/16]{\defobjectfmt} \begin{codesyntax} % \tsmacro{\defobjectfmt}{obj-type,format-group,format-keys} \end{codesyntax} \tsobj[marg]{obj-type} is the name of the new \tsobj[arg]{object} being defined (or redefined), \tsobj[marg]{format-group} is the base group to be used. \tsobj[marg]{format-keys} allows for further differentiation. \end{codedescribe} For instance, the many optional \tsobj[arg]{*arg} are defined as follow: \begin{codestore}[demo.fmtdef] \colorlet {c__codedesc_oarg_color} { gray!90!black } \defgroupfmt {oarg} { meta , color=c__codedesc_oarg_color } \defobjectfmt {oarg} {oarg} { lbracket={[} , rbracket={]} } \defobjectfmt {parg} {oarg} { lbracket={(} , rbracket={)} } \defobjectfmt {xarg} {oarg} { lbracket={<} , rbracket={>} } \end{codestore} \tscode*[codeprefix=~,keywd={oarg,arg,parg,xarg},keywd2={meta,color},emph={lbracket,rbracket}]{demo.fmtdef} \subsection{Environments} \begin{codedescribe}[env,new=2023/05/01,update=2023/05/1,note={this is an example}]{codedescribe} \begin{codesyntax} \tsmacro{\begin{codedescribe}}[obj-type]{csv-list} \ldots \tsmacro{\end{codedescribe}}{} \end{codesyntax}[Note 1:] This is the main environment to describe \tsobj[env]{Macros, Functions, Variable, Environments, etc.} \tsobj[meta]{csv-list} is typeset in the margin. The optional \tsobj[oarg]{obj-type} defines the object-type format. \end{codedescribe} \begin{tsremark} One can change the rule color with the key \tsobj[keys]{rulecolor}, for instance \tsmacro{\begin{codedescribe}[rulecolor=white]}{} will remove the rules. \end{tsremark} \begin{tsremark}[Note 2:] Besides that, one can use the keys \tsobj[keys]{new,update,note} to further customize it as: \tsverb{\begin{codedescribe}[new=2023/05/01,update=2023/05/1,note={this is an example}]} \end{tsremark} \begin{tsremark}[Note 3:] Finally, one can use \tsobj[key]{EXP,rEXP} to add a star \ding{72} or a hollow star \ding{73}, as per expl3/doc3 conventions (if expandable, restricted expandable or not). \end{tsremark} \begin{codedescribe}[env]{codesyntax} \begin{codesyntax} \tsmacro{\begin{codesyntax}}{} \ldots \tsmacro{\end{codesyntax}}{} \end{codesyntax} The \tsobj[env]{codesyntax} environment sets the fontsize and activates \tsmacro{\obeylines,\obeyspaces}{}, so one can list macros/cmds/keys use, one per line. \end{codedescribe} \begin{tsremark} \tsobj[env]{codesyntax} environment shall appear only once, inside of a \tsobj[env]{codedescribe} environment. Take note, as well, this is not a verbatim environment! %\begin{describelist*}{code} %\describe{something}{ a text} %\describe{some}{ some text} %\end{describelist*} % \end{tsremark} For example, the code for \tsobj[env]{codedescribe} (entry above) is: \begin{codestore}[demoD] \begin{codedescribe}[env,new=2023/05/01,update=2023/05/1,note={this is an example}]{codedescribe} \begin{codesyntax} \tsmacro{\begin{codedescribe}}[obj-type]{csv-list} \ldots \tsmacro{\end{codedescribe}}{} \end{codesyntax} This is the main ... \end{codedescribe} \end{codestore} \tscode*{demoD} \begin{codedescribe}[env]{describelist,describelist*} \begin{codesyntax} \tsmacro{\begin{describelist}}[item-indent]{obj-type} ..\tsmacro{\describe}{item-name,item-description} ..\tsmacro{\describe}{item-name,item-description} \ldots \tsmacro{\end{describelist}}{} \end{codesyntax} This sets a \tsobj[env]{description} like 'list'. In the non-star version the \tsobj[marg]{items-name} will be typeset on the marginpar. In the star version, \tsobj[marg]{item-description} will be indented by \tsobj[oarg]{item-indent} (defaults to: 20mm). \tsobj[marg]{obj-type} defines the object-type format used to typeset \tsobj[marg]{item-name}. \end{codedescribe} \begin{codedescribe}[code]{\describe} \begin{codesyntax} \tsmacro{\describe}{item-name,item-description} \end{codesyntax} This is the \tsobj[env]{describelist} companion macro. In case of the \tsobj[env]{describe*}, \tsobj[marg]{item-name} will be typeset in a box \tsobj[oarg]{item-ident} wide, so that \tsobj[marg]{item-description} will be fully indented, otherwise \tsobj[marg]{item-name} will be typed in the marginpar. \end{codedescribe} \subsection{Commands} \begin{codedescribe}[code]{\typesetobj,\tsobj} \begin{codesyntax} \tsmacro{\typesetobj}[obj-type]{csv-list} \tsmacro{\tsobj}[obj-type]{csv-list} \end{codesyntax} This is the main typesetting command (most of the others are based on this). It can be used to typeset a single 'object' or a list thereof. In the case of a list, each term will be separated by commas. The last two by \tsobj[key]{sep} (defaults to: and). \end{codedescribe} \begin{tsremark} One can change the last 'separator' with the key \tsobj[keys]{sep}, for instance \tsverb[code]{\tsobj[env,sep=or] {}} (in case one wants to produce an 'or' list of environments). Additionally, one can use the key \tsobj[keys]{comma} to change the last separator to a single comma, like \tsverb[code]{\tsobj[env,comma] {}}. \end{tsremark} \begin{codedescribe}[code]{\typesetargs,\tsargs} \begin{codesyntax} \tsmacro{\typesetargs}[obj-type]{csv-list} \tsmacro{\tsargs}[obj-type]{csv-list} \end{codesyntax} Those will typeset \tsobj[marg]{csv-list} as a list of parameters, like \tsargs[oarg]{arg1,arg2,arg3}, or \tsargs[marg]{arg1,arg2,arg3}, etc. \tsobj[oarg]{obj-type} defines the formating AND kind of brackets used (see \ref{obj-type-def}): \tsverb{[]} for optional arguments (oarg), \tsverb{{}} for mandatory arguments (marg), and so on. \end{codedescribe} \begin{codedescribe}[code]{\typesetmacro,\tsmacro} \begin{codesyntax} \tsmacro{\typesetmacro}{macro-list}\tsargs[oarg]{oargs-list}\tsargs[marg]{margs-list} \tsmacro{\tsmacro}{macro-list}\tsargs[oarg]{oargs-list}\tsargs[marg]{margs-list} \end{codesyntax} This is just a short-cut for\par \tsobj[code]{\tsobj [code] {macro-list}} \tsobj[code]{\tsargs [oarg] {oargs-list}} \tsobj[code]{\tsargs [marg] {margs-list}}. \end{codedescribe} \begin{codedescribe}[code]{\typesetmeta,\tsmeta} \begin{codesyntax} \tsmacro{\typesetmeta}{name} \tsmacro{\tsmeta}{name} \end{codesyntax} Those will just typeset \tsobj[meta]{name} between left/right 'angles' (no other formatting). \end{codedescribe} \begin{codedescribe}[code]{\typesetverb,\tsverb} \begin{codesyntax} \tsmacro{\typesetverb}[obj-type]{verbatim text} \tsmacro{\tsverb}[obj-type]{verbatim text} \end{codesyntax} Typesets \tsobj[marg]{verbatim text} as is (verbatim...). \tsobj[oarg]{obj-type} defines the used format. The difference with \tsverb{\tsobj[verb]{something}} is that \tsmeta{something} can contain commas (which, otherwise, would be interpreted as a list separator in \tsobj{\tsobj}. \end{codedescribe} \begin{tsremark} This is meant to short expressions, and not multi-line, complex code (one is better of, then, using \ref{codelist}). \tsobj[meta]{verbatim text} must be balanced ! otherwise, some low level \TeX\ errors may pop out. \end{tsremark} \begin{codedescribe}[code]{\typesetmarginnote,\tsmarginnote} \begin{codesyntax} \tsmacro{\typesetmarginnote}{note} \tsmacro{\tsmarginnote}{note} \end{codesyntax} Typesets a small note at the margin. \end{codedescribe} \begin{codedescribe}[env]{tsremark} \begin{codesyntax} \tsmacro{\begin{tsremark}}[NB]{} \tsmacro{\end{tsremark}}{} \end{codesyntax} The environment body will be typeset as a text note. \tsobj[oarg]{NB} (defaults to Note:) is the note begin (in boldface). For instance: \begin{codestore}[demo.remark] Sample text. Sample test. \begin{tsremark}[N.B.] This is an example. \end{tsremark} \end{codestore} \tsdemo{demo.remark} \end{codedescribe} \subsection{Auxiliary Command / Environment} In case the used Document Class redefines the \tsobj[code]{\maketitle} command and/or \tsobj[env]{abstract} environment, alternatives are provided (based on the article class). \begin{codedescribe}[code]{typesettitle,tstitle} \begin{codesyntax} \tsmacro{\typesettitle}{title-keys} \tsmacro{\tstitle}{title-keys} \end{codesyntax} This is based on the \tsobj[code]{\maketitle} from the \tsobj[pkg]{article} class. The \tsobj[marg]{title-keys} are: \end{codedescribe} \begin{describelist}{key} \describe{title}{The used title.} \describe{author}{Author's name. It's possible to use \tsobj[code]{\footnote} command in it.} \describe{date}{Title's date.} \end{describelist} \begin{codedescribe}[env]{tsabstract} \begin{codesyntax} \tsmacro{\begin{tsabstract}}{} \ldots \tsmacro{\end{tsabstract}}{} \end{codesyntax} This is the \tsobj[env]{abstract} environment from the \tsobj[pkg]{article} class. \end{codedescribe} \begin{codedescribe}[code,new=2023/05/16]{typesetdate,tsdate} \begin{codesyntax} \tsmacro{\typesetdate}{} \tsmacro{\tsdate}{} \end{codesyntax} This provides the current date (Month Year, format). \end{codedescribe} \end{document}