% Last modified: Wed 03 May 2023 07:02:51 PM CDT
\documentclass[11pt,letterpaper,oneside]{article}
\usepackage{windycity}

\begin{document}
\title{Windy City}
\subtitle{A Chicago Style for \texttt{\biblatex}}
\author{Brian Chase}
\email{brianmichaelchase@gmail.com}
\website{https://github.com/brianchase/windycity}
\version{2023-05-03}
\maketitle
\begingroup
\hypersetup{linkcolor=black}
\tableofcontents\markboth{Contents}{Contents}
\endgroup

\section{Introduction}

\nfootnote{Copyright \textcopyright\ 2014--2023 Brian Chase. Under the
terms of the \LaTeX\ Project Public License, version 1.3, permission
is granted to copy, distribute, or modify this software. See
\url{http://www.ctan.org/tex-archive/macros/latex/base/lppl.txt} or
\url{https://www.latex-project.org/lppl/}.}

Windy City is a style for \biblatex that formats notes,
bibliographies, parenthetical citations, and reference lists according
to the 17th edition of \textit{The Chicago Manual of Style}
(\textit{CMOS}).\footnote{\cite{chicago2017}} It accurately handles a
wide range of citations in different formats and includes a set of
options and commands to support special circumstances. It also has
extensive support for citing and arranging different kinds of editors
and translators within a single citation. These features make Windy
City especially suitable for academic work.

The following sections assume familiarity with \textit{CMOS} and
\biblatex. Section \ref{overview} gives a brief overview of the
style's features. Section \ref{editors} discusses the assignment and
placement of editors and translators. Section \ref{collections}
discusses several issues with collections, including options for
formatting citations of individual volumes. Sections \ref{notes} and
\ref{paren} reproduce examples from \textit{CMOS} chapters 14 and 15,
respectively, with occasional commentary and references to other
sections.

Windy City requires \biblatex version 3.13 or later.

\section{Overview}
\label{overview}

This section covers basic information about Windy City. If you're
completely new to \biblatex, you should probably glance at its
documentation. For the impatient, examples in sections \ref{standard},
\ref{short}, \ref{notes}, and \ref{paren} might be of more immediate
interest.

\subsection{Getting Started}

If you already know how to use \biblatex, getting started with Windy
City is easy. First, confirm that \biblatex and Windy City are
installed properly on your system. Since both are included in some
distributions of \LaTeX, you might already have them.

Either way, please consider downloading the most recent release of
Windy City from its
\begingroup\hypersetup{urlcolor=blue}\href{https://www.ctan.org/pkg/windycity}{home
on CTAN} or
\href{https://github.com/brianchase/windycity/releases}{repository on
GitHub}. More recent but potentially less reliable updates are
available on \href{https://github.com/brianchase/windycity}{the main
project page}.\endgroup

Windy City consists of four files:

\begin{itemize}[before=\small]
\item \file{windycity.bbx}
\item \file{windycity.cbx}
\item \file{windycity.dbx}
\item \file{american-windycity.lbx}
\end{itemize}

If you need to install Windy City on your system, you have several
options. For a one-off compilation, say, to give Windy City a trial
run on a single document, you could copy Windy City's files to the
document's root directory. Beyond that, your best option is to install
it in your local \path{texmf}. Copy the files to a directory of your
choosing, then update your \path{texmf} file name database.

To compile a document with Windy City, tell \biblatex to load it with
the load-time option \opt{style}:

\begin{verbatim}
   \usepackage[style=windycity]{biblatex}
\end{verbatim}

\noindent Typically, this goes in a document's preamble or in one of
its style files.

The localization file \file{american-windycity.lbx} is responsible for
Windy City's American-style punctuation and dates and many of the
bibliography strings that print in citations, such as \textit{edited
by}. Windy City loads this file if \biblatex determines that your
document's language is English---either due to settings in \babel or
\polyglossia or because neither \babel nor \polyglossia has been
loaded. You can prevent Windy City from loading
\file{american-windycity.lbx} by commenting the following line in
\file{windycity.bbx}:

\begin{verbatim}
   \DeclareLanguageMapping{english}{american-windycity}
\end{verbatim}

If you wish to use Windy City with a language other than English, set
it accordingly with \babel or \polyglossia before loading \biblatex.
Windy City will then try to load \file{<language>-windycity.lbx} and,
if it's available, use it to override any other localization files
that were loaded. This allows you to make your own localization files
for Windy City without needing to edit other files. For example, if
you load \babel with option \sty{german}, Windy City will try to load
\file{german-windycity.lbx}. If it's available, it will override any
other localization files that were loaded, including \biblatex's own
\file{german.lbx}.

For some entries in your bibliography database, you may need to add
fields or make other adjustments to get the right output. But since
Windy City relies as much as possible on standard \BibTeX\ fields, and
secondarily on \biblatex fields, you may not need to make major
changes. The examples in this document and its accompanying
bibliography database, \file{windycity.bib}, should serve as a guide
for how to manage your input for nearly every circumstance that the
style is meant to handle.

\subsection{Standard Citations}
\label{standard}

For a first set of examples, consider this passage from \textit{CMOS}
\ref{14.30}:

\begin{citenobib}
\item \cite[24--25]{morley1995}
\item \cite{schwartz1992}
\item \cite{kaiser1964}
\item \cite[43]{morley1995}
\item \cite[138]{schwartz1992}
\item \cite[189--90]{kaiser1964}
\end{citenobib}

A work's first citation is similar to its entry in the bibliography.
It includes all or most of its bibliographic information. Subsequent
citations are shorter, usually consisting of a short form of the
author's name and a short form of the work's title.

Windy City supports variations on this format. For information on
short citations, including the use of \textit{ibid.}, see section
\ref{short}. For options to skip parts of citations, change the order
of editors and translators, and more, see sections \ref{preamble} and
\ref{entry}. For parenthetical citations, see section \ref{paren}.

The block below shows Windy City's default bibliography for the
previously cited works:

\begin{bibonly}
\nocite{kaiser1964,morley1995,schwartz1992}
\end{bibonly}

You may also print a bibliography in the author-date format (what
\textit{CMOS} calls a reference list). The key difference is the
placement of the publication date after the author's name:

\begin{refonly}
\nocite{kaiser1964,morley1995,schwartz1992}
\end{refonly}

To make \cmd{printbibliography} use the author-date format, load
\biblatex with Windy City's preamble option \opt{reflist}:

\begin{verbatim}
   \usepackage[reflist,style=windycity]{biblatex}
\end{verbatim}

\noindent Alternatively:

\begin{verbatim}
   \usepackage[reflist=true,style=windycity]{biblatex}
\end{verbatim}

To use the author-date format on a case-by-case basis, run
\cmd{printbibliography} with an appropriate \opt{env} option. With
Windy City, a so-called ``bib environment'' must set the style's
internal \opt{reflist} toggle to \opt{true}. Windy City's own such
environment is called \opt{reflist}. Use it as follows:

\begin{verbatim}
   \printbibliography[env=reflist]
\end{verbatim}

Unfortunately, while the \opt{env} option allows for differently
formatted bibliographies within the same document, the reference lists
may have problems with sorting. (You'll notice some in \ref{ref}, at
the end of this document.) For best results, use the \opt{reflist}
preamble option.

As you proceed through this guide, note that all examples of citations
and bibliographies are outputs of the style from commands that you can
inspect in the document's source, \file{windycity.tex}, and in its
style file, \file{windycity.sty}. Almost all citations are from
\cmd{cite} or \cmd{parencite}. A few are from more specialized
commands, such as \cmd{cite*} or \cmd{cites}. All example
bibliographies are outputs of the style from \cmd{printbibliography}.
All bibliographic data reside in \file{windycity.bib}.

\subsection{Short Citations}
\label{short}

Standard citations may take a variety of shorter forms. Windy City
offers several preamble options and other means for producing them.

Let's start with another passage of default output:

\begin{citenobib}
\item \cite[3]{morrison2004a}
\item \cite[18]{morrison2004a}
\item \cite[18]{morrison2004a}
\item \cite[24--26]{morrison2004a}
\item \cite[401-2]{morrison2004b}
\item \cite[433]{morrison2004b}
\item \cite[37--38]{diaz2007}
\item \cite[403]{morrison2004b}
\item \cite[152]{diaz2007}
\item \cite[201-2]{diaz2007}
\item \cites[240]{morrison2004b}[32]{morrison2004a}
\item \cite[33]{morrison2004a}
\end{citenobib}

A shorter form of this passage appears in \textit{CMOS}
\ref{14.34}:\footnote{Switching forms within a document isn't a
feature of the style. For demonstration purposes, though, it's
possible.}

% Preamble option 'short' sets 'short' and 'shortfirst' toggles to
% true. Set them to true to simulate the 'short' preamble option.

\begin{citenobib}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[3]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[24--26]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[401-2]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[433]{morrison2004b}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[37--38]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[403]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[152]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[201-2]{diaz2007}
\AtNextMultiCite{\toggletrue{short}}
\item \cites[240]{morrison2004b}[32]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[33]{morrison2004a}
\end{citenobib}

In this version, a work's first citation gives short names and titles
and omits all other publication information. Consecutive citations of
a work may omit the title or, as in the eleventh note, the author's
name. For citations in this form, use the preamble option \opt{short}.
See section \ref{preamble} for more information.

\textit{CMOS} \ref{14.34} also shows how to render the passage with
\textit{ibid.} Unlike previous editions of \textit{CMOS}, the 17th
edition discourages its use. Windy City makes it available with the
preamble option \opt{ibid} (see section \ref{preamble}). Options
\opt{short} and \opt{ibid} together give the following:\footnote{As
explained in section \ref{preamble}, Windy City won't print
\textit{ibid.} in reference to a citation on a previous page. A page
break here may affect the output.}

% Preamble option 'short' sets 'short' and 'shortfirst' toggles to
% true. Preamble option 'ibid' sets 'ibid', 'ibidpage', and 'short'
% toggles to true. Set all those toggles to true to simulate the
% 'short' and 'ibid' preamble options.

\begin{citenobib}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[3]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}\toggletrue{ibidpage}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[24--26]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[401-2]{morrison2004b}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[433]{morrison2004b}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[37--38]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[403]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[152]{diaz2007}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[201-2]{diaz2007}
\AtNextMultiCite{\toggletrue{short}\toggletrue{shortfirst}}
\item \cites[240]{morrison2004b}[32]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[33]{morrison2004a}
\end{citenobib}

For a compromise between standard and short forms, try the  preamble
option \opt{shortfirst}. It swaps long first citations for short ones
but otherwise follows the standard form (see section \ref{preamble}).
For another variant, try \opt{shortafter}, which gives the same output
as \opt{short} but with long first citations. Also with standard
citations, the preamble option \opt{idemtracker} shortens the author's
name of a work's first citation if the previous citation is of the
same author (see section \ref{preamble}). The entry option
\opt{noauth} omits the author's name altogether (see section
\ref{entry}). And the \bibfield{shorthand} field allows you to set an
abbreviation to stand in place of the author's name, the work's title,
and other elements of a citation (see sections \ref{stdfields} and
\ref{14.59}).

\subsection{Preamble Options}
\label{preamble}

A preamble option is an argument for the \cmd{usepackage} macro that
loads \biblatex. Preamble options affect the format of notes,
bibliographies, and reference lists. Windy City relies on many
preamble options from \biblatex and supports or provides others to
allow you to change the default output.

% Windy City sets preamble options for \biblatex in
% \file{windycity.bbx}. The list there isn't complete. The style needs
% to set some options to comply with \textit{CMOS}, sets others as a
% precaution, and leaves still others untouched. Users who want
% fine-grained control of the style should look through the list along
% with \biblatex's user guide.

Many options below are \opt{false} by default. Make an option
\opt{true} by passing its name to \biblatex, with or without
\opt{=true}. Using \opt{annotate} as an example, the following are
equivalent:

\begin{verbatim}
   \usepackage[annotate,style=windycity]{biblatex}
   \usepackage[annotate=true,style=windycity]{biblatex}
\end{verbatim}

If an option is \opt{true} by default, make it \opt{false} by passing
its name with \opt{=false}. Using \opt{doi} as an example:

\begin{verbatim}
   \usepackage[doi=false,style=windycity]{biblatex}
\end{verbatim}

\begin{optionlist}

\optitem[false]{annotate}{\opt{true}, \opt{false}}

\noindent This option is for printing annotated bibliographies.
Annotations print in block paragraphs below entries. To change
the spacing between entries and annotations, change the value of
\cmd{bibitemsep}. Save an annotation in the \bibfield{annotation}
field of a work's bibliography database entry.

\optitem[false]{collsonly}{\opt{true}, \opt{false}}

\noindent Citing individual works of a collection adds entries for
those works to the bibliography. To exclude them and print only an
entry for the whole collection, use \opt{collsonly}. It has no effect
on many \bibtype{incollection} entries, such as articles in books, or
on \bibtype{article} entries cross-referenced to a
\bibtype{periodical}, but it does filter out chapters of books, books
in books, and volumes of collections. For discussion of multivolume
works, see section \ref{multivolume}.

\optitem[true]{dashed}{\opt{true}, \opt{false}}

\noindent Set \opt{false} to remove the 3-em dash for repeated names
in bibliographies.

\optitem[true]{doi}{\opt{true}, \opt{false}}

\noindent Set \opt{false} to prevent the \bibfield{doi} field from
printing.

\optitem[true]{eprint}{\opt{true}, \opt{false}}

\noindent Set \opt{false} to prevent the \bibfield{eprint} field from
printing. For more information about eprints, see section
\ref{datafields}.

\optitem[false]{ibid}{\opt{true}, \opt{false}}

\noindent This option controls whether consecutive citations of a work
on the same page receive an \textit{ibid}. For examples, see section
\ref{short} and \textit{CMOS} \ref{14.34}. As of the 17th edition,
\textit{CMOS} discourages the use of \textit{ibid.}

% The qualification ``on the same page'' means that the referent of an
% \textit{ibid.} is never on a different page. The latter isn't a
% requirement of \textit{CMOS} but seems reasonable, since it prevents
% readers from having to look at another page to find the referent of
% an \textit{ibid}.

\optitem[false]{ibidpage}{\opt{true}, \opt{false}}

\noindent If \opt{true}, the \bibfield{postnote} field won't print if
the previous citation on the page is of the same entry with the same
\bibfield{postnote}. The \opt{ibid} preamble option uses
\opt{ibidpage}.

\optitem[false]{idemtracker}{\opt{true}, \opt{false}, \opt{context},
\opt{strict}, \opt{constrict}}

\noindent If \opt{true}, the first citation of a work prints with a
shortened author's name if the previous citation is of another work by
the same author.

Recall \textit{CMOS} \ref{14.34}, where the first citation of Toni
Morrison's \textit{Song of Solomon} immediately follows citations of
her \textit{Beloved}. The default output prints her full name twice,
once for the first citation of \textit{Song of Solomon} and again for
the first citation of \textit{Beloved}. If \opt{idemtracker} is
\opt{true} (or in many contexts any value other than \opt{false}), her
full name prints just once, at the beginning of the series.

% As for \texit{CMOS}, the 16th edition, Figure 14.3, shows
% consecutive citations of works by the same author, both of which
% give the author's full name.

For more information on \opt{idemtracker}, see the discussion in
\biblatex's user guide.

\optitem[false]{isbn}{\opt{true}, \opt{false}}

\noindent Use this option to print ISBNs in bibliographies. A work's
ISBN goes in the \bibfield{isbn} field of its bibliography database
entry. With this option, the style prints ISBNs at the end of every
entry in the bibliography, before annotations. To print the ISBN of a
particular work, use the \opt{isbn} entry option.

\optitem[false]{issn}{\opt{true}, \opt{false}}

\noindent Similar to \opt{isbn} but for ISSNs.

\optitem[false]{library}{\opt{true}, \opt{false}}

\noindent Like \opt{isbn} and \opt{issn}, this option prints the
\bibfield{library} field of every work in the bibliography. Use it to
print information about libraries, call numbers, and the like. If you
use it with the \opt{isbn} and \opt{annotation} options, it prints
after the former but before the latter. To print this information for
selected works, use the \opt{library} entry option.

\optitem[false]{noetal}{\opt{true}, \opt{false}}

\noindent This option disables the truncation of name lists in all
citations and bibliographies. To disable truncation in the citations
and bibliography entries of specific works, use the \opt{noetal} entry
option.

\optitem[false]{nolos}{\opt{true}, \opt{false}}

\noindent By default, every work with a \bibfield{shorthand} receives
an entry in the bibliography. If you wish to exclude them, say, to
avoid duplication with the output of \cmd{printshorthands}, use
\opt{nolos}. Since \opt{collsonly} also excludes works from the
bibliography, their results may overlap.

\optitem[false]{nopages}{\opt{true}, \opt{false}}

\noindent On the first citation of \bibtype{article} or
\bibtype{review} entries (and their aliases), Windy City prints the
\bibfield{pages} field if the \bibfield{postnote} field is blank. This
lets you cite the entirety of a work without having to duplicate the
content of the \bibfield{pages} field in the \bibfield{postnote}. To
override this feature, use \opt{nopages}.

\optitem[false]{reflist}{\opt{true}, \opt{false}}

\noindent Use this option to print a bibliography in the author-date
format (what \textit{CMOS} calls a reference list). If you use
parenthetical citations, consider using \opt{reflist} to maintain
consistency with \textit{CMOS}. Again, another way to print a
reference list is to pass \opt{env=reflist} to
\cmd{printbibliography}. See section \ref{overview} for more
information.

\optitem[false]{sentencecase}{\opt{true}, \opt{false}}

\noindent This option puts titles in sentence-style capitalization,
also called sentence case (see \textit{CMOS} 8.158), whereby the first
letter is uppercase and subsequent letters are lowercase. Affected
fields: \bibfield{title}, \bibfield{blogtitle},
\bibfield{bookbooktitle}, \bibfield{booktitle}, \bibfield{issuetitle},
\bibfield{journal}, \bibfield{journaltitle}, \bibfield{maintitle},
\bibfield{origtitle}, \bibfield{shortbooktitle}, \bibfield{shorthand},
\bibfield{shorttitle}, and \bibfield{shortmaintitle}.

\optitem[false]{short}{\opt{true}, \opt{false}}

\noindent As shown in section \ref{short}, this option prints short
citations (see \textit{CMOS} \ref{14.34}). The use of \opt{short} has
one feature in common with \opt{ibid}: It affects only consecutive
citations of a work on the same page. As with \textit{ibid.}, this
feature isn't required by \textit{CMOS}, but it prevents readers from
having to look at another page to find the title of a citation.

In contexts where \opt{short} would drop a title from a citation, but
where no name occupies the author's position, it prints the work's
\bibfield{labeltitle}. This can be a short form of the title, either
the title minus the subtitle or the content of the
\bibfield{shorttitle} field, if available.

As noted earlier, \opt{short} has the same effect on first citations
as \opt{shortfirst}. But recall from section \ref{short} that you can
combine \opt{short} and \opt{ibid} for more concise output.

\optitem[false]{shortafter}{\opt{true}, \opt{false}}

\noindent If you want the output of \opt{short} but with long first
citations, use \opt{shortafter}. Compare the following with examples
in \textit{CMOS} \ref{14.34}:

% The option 'short' implies the option 'shortfirst'. The option
% 'shortafter' doesn't. Hence, to display the output of 'shortafter'
% below, you need only toggle true 'short'.

\begin{citenobib}
\AtNextCitekey{\toggletrue{short}}
\item \cite[3]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[24--26]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[401-2]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[433]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[37--38]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[403]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[152]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[201-2]{diaz2007}
\AtNextMultiCite{\toggletrue{short}}
\item \cites[240]{morrison2004b}[32]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[33]{morrison2004a}
\end{citenobib}

\optitem[false]{shortfirst}{\opt{true}, \opt{false}}

\noindent Use this option to shorten a work's first citation. The
resulting output consists mainly of the author's name and the work's
title. According to \textit{CMOS}, this approach is optional for
documents with complete bibliographies. (See \textit{CMOS}
\ref{14.23}, also 14.29--14.36.) As with \opt{short}, you may use
\opt{shortfirst} with \opt{ibid} for more concise citations.

\optitem[false]{shortlinks}{\opt{true}, \opt{false}}

\noindent If you use Windy City with
\href{http://www.ctan.org/pkg/hyperref}{\textcolor{blue}{hyerref}},
citations contain embedded links to their respective entries in the
bibliography. In standard citations, these links encompass the entire
citation (minus some punctuation). With \opt{shortlinks}, they're
embedded in just one element: the title or, if no title is present,
whatever part of the citation occupies the author's position, such as
the author's name, \textit{ibid.}, or a shorthand. For comparison, the
blue text below shows default links:

\hypersetup{citecolor=blue}
\begin{citenobib}
\item \cite[24--25]{morley1995}
\item \cite{schwartz1992}
\item \cite{kaiser1964}
\item \cite[43]{morley1995}
\item \cite[138]{schwartz1992}
\item \cite[189--90]{kaiser1964}
\end{citenobib}

\noindent And here they are with \opt{shortlinks}:

\begin{citenobib}
\AtNextCitekey{\toggletrue{shortlinks}}
\item \cite[24--25]{morley1995}
\AtNextCitekey{\toggletrue{shortlinks}}
\item \cite{schwartz1992}
\AtNextCitekey{\toggletrue{shortlinks}}
\item \cite{kaiser1964}
\AtNextCitekey{\toggletrue{shortlinks}}
\item \cite[43]{morley1995}
\AtNextCitekey{\toggletrue{shortlinks}}
\item \cite[138]{schwartz1992}
\AtNextCitekey{\toggletrue{shortlinks}}
\item \cite[189--90]{kaiser1964}
\end{citenobib}
\hypersetup{citecolor=}

\optitem[false]{swapvol}{\opt{true}, \opt{false}}

\noindent In bibliographies and long citations, works in collections
may place publication information for the volume before that of the
collection or \textit{vice versa}. Windy City gives priority to the
volume. To reverse this for all relevant citations, use \opt{swapvol}.
For more information, see section \ref{collorder}.

\optitem[true]{url}{\opt{true}, \opt{false}}

\noindent Set \opt{false} to prevent the \bibfield{url} field from
printing.

\end{optionlist}

\subsection{Entry Options}
\label{entry}

An entry option goes in the \bibfield{options} field of a work's
database entry. It affects the format of that work. For options that
affect the format of every work, see section \ref{preamble}.

As with preamble options, many options below are \opt{false} by
default. Make an option \opt{true} by putting its name in the
\bibfield{options} field of a work's bibliography database entry, with
or without \opt{=true}. Using \opt{annotate} as an example, the
following are equivalent:

\begin{verbatim}
   options = {annotate},
   options = {annotate=true},
\end{verbatim}

If an option is \opt{true} by default, make it \opt{false} by putting
its name with \opt{=false} in the \bibfield{options} field. Using
\opt{doi} as an example:

\begin{verbatim}
   options = {doi=false},
\end{verbatim}

\begin{optionlist}

\optitem[false]{annotate}{\opt{true}, \opt{false}}

\noindent Set \opt{true} to print an entry's \bibfield{annotation}
field. To change the spacing between entries and annotations, change
the value of \cmd{bibitemsep}.

\optitem[true]{doi}{\opt{true}, \opt{false}}

\noindent Set \opt{false} to prevent the \bibfield{doi} field from
printing.

\optitem[false]{emph}{\opt{true}, \opt{false}}

\noindent Short for \opt{emph:title}.

\optitem[false]{emph:<field>}{\opt{true}, \opt{false}}

\noindent This option puts titles in italics. Supported values of
\bibfield{<field>}: \bibfield{title}, \bibfield{blogtitle},
\bibfield{bookbooktitle}, \bibfield{booktitle}, \bibfield{issuetitle},
\bibfield{journal}, \bibfield{journaltitle}, \bibfield{maintitle},
\bibfield{origtitle}, \bibfield{shortbooktitle}, \bibfield{shorthand},
\bibfield{shorttitle}, and \bibfield{shortmaintitle}.

\optitem[true]{eprint}{\opt{true}, \opt{false}}

\noindent Set \opt{false} to prevent the \bibfield{eprint} field from
printing. For more information about eprints, see section
\ref{datafields}.

\optitem[false]{ifcapital}{\opt{true}, \opt{false}}

\noindent Short for \opt{ifcapital:title}.

\optitem[false]{ifcapital:<field>}{\opt{true}, \opt{false}}

\noindent This option uppercases the first letter of titles when
\cmd{ifcapital} is true. Supported values of \bibfield{<field>}:
\bibfield{title}, \bibfield{blogtitle}, \bibfield{bookbooktitle},
\bibfield{booktitle}, \bibfield{issuetitle}, \bibfield{journal},
\bibfield{journaltitle}, \bibfield{maintitle}, \bibfield{origtitle},
\bibfield{shortbooktitle}, \bibfield{shorthand},
\bibfield{shorttitle}, and \bibfield{shortmaintitle}.

In combination with \opt{noformat:<field>}, this option allows you to
work with complex titles, where different parts need different formats
in different contexts. From \textit{CMOS} \ref{14.210}:

\begin{verbatim}
   @Online{braun2016,
     options = {noformat,ifcapital},
     author = {Braun, Caroline},
     title = {reply to \mkbibquote{How did the `cool kids' from high
              school turn out?}},
     organization = {Quora},
     date = {2016-08-09},
     url = {https://www.quora.com/How-did-the-cool-kids-from-high
            -school-turn-out/}
   }
\end{verbatim}

\begin{citebib}
\item \cite{braun2016}
\end{citebib}

\optitem[false]{isbn}{\opt{true}, \opt{false}}

\noindent Use this option to print the ISBN of a particular work in a
bibliography. The ISBN appears at the end of the work's entry (if
applicable, before an annotation). To print ISBNs of every work in the
bibliography, see the \bibfield{isbn} preamble option.

\optitem[false]{issn}{\opt{true}, \opt{false}}

\noindent Similar to \opt{isbn} but for ISSNs.

\optitem[false]{library}{\opt{true}, \opt{false}}

\noindent This option prints the \bibfield{library} field of a work's
bibliography database entry. This information prints at the end of the
work's entry (if applicable, after an ISBN and before an annotation).
To print the \bibfield{library} field of every work in the
bibliography, use the \opt{library} preamble option.

\optitem[false]{listvols}{\opt{true}, \opt{false}}

\noindent \textit{CMOS} offers some flexibility over whether a long
citation gives a work's total number of volumes (see \textit{CMOS}
\ref{14.118}). Windy City replicates this in a roundabout way: By
default, it prints the \bibfield{volumes} field in certain long
citations only if the \bibfield{postnote} field is empty. This does a
better job of matching examples in \textit{CMOS} than a simpler policy
would. For the rest, use \opt{listvols}. It prints the
\bibfield{volumes} field in those citations no matter what the
\bibfield{postnote} contains. For more information, see section
\ref{collorder}.

\optitem[false]{noauth}{\opt{true}, \opt{false}}

\noindent This option tells the style to bypass the author's position
of a work in notes and bibliographies. Citations will begin with the
title's position. Below is an example from \textit{CMOS} \ref{14.105}:

\begin{citebib}
\item \cite{chaucer1966}
\end{citebib}

\noindent To bypass the author's position in a single note, without
affecting the bibliography, use starred versions of citation commands,
such as \cmd{cite*}, \cmd{footcite*}, and \cmd{parencite*}.

\optitem[false]{noetal}{\opt{true}, \opt{false}}

\noindent This option disables the truncation of name lists in the
citations and bibliography entries of specific works. To disable
truncation in all works, use the \opt{noetal} preamble option.

\optitem[false]{noformat}{\opt{true}, \opt{false}}

\noindent Short for \opt{noformat:title}.

\optitem[false]{noformat:<field>}{\opt{true}, \opt{false}}

\noindent This option removes formatting from titles. Supported values
of \bibfield{<field>}: \bibfield{title}, \bibfield{blogtitle},
\bibfield{bookbooktitle}, \bibfield{booktitle}, \bibfield{issuetitle},
\bibfield{journal}, \bibfield{journaltitle}, \bibfield{maintitle},
\bibfield{origtitle}, \bibfield{shortbooktitle}, \bibfield{shorthand},
\bibfield{shorttitle}, and \bibfield{shortmaintitle}.

\optitem[false]{noplace}{\opt{true}, \opt{false}}

\noindent In contexts where Windy City expects to print a publisher's
location, but no location is specified in the bibliography database,
you can tell it to print \textit{n.p.} (for \textit{no place}) with
this option. From \textit{CMOS} \ref{14.132}:

\begin{citenobib}
%\begin{itemize}[before=\small,itemindent=0ex]
\item[] \cite{windsor1910}
\end{citenobib}
%\end{itemize}

\optitem[false]{noreprint}{\opt{true}, \opt{false}}

\noindent This option helps if you need to indicate a work's original
year of publication with the \bibfield{origdate} or
\bibfield{origyear} field but want to depart from the style's usual
output by excluding the \textit{reprint} bibliography string. First,
an example of the default output from \textit{CMOS} \ref{15.40} (in
the author-year format):

\begin{refonly}
\nocite{maitland1998}
\end{refonly}

\noindent Now, from the same section, an example that requires
\opt{noreprint}:

\begin{refonly}
\nocite{darwin1964}
\end{refonly}

\optitem[false]{quotes}{\opt{true}, \opt{false}}

\noindent Short for \opt{quotes:title}.

\optitem[false]{quotes:<field>}{\opt{true}, \opt{false}}

\noindent This option puts titles in quotes. Supported values of
\bibfield{<field>}: \bibfield{title}, \bibfield{blogtitle},
\bibfield{bookbooktitle}, \bibfield{booktitle}, \bibfield{issuetitle},
\bibfield{journal}, \bibfield{journaltitle}, \bibfield{maintitle},
\bibfield{origtitle}, \bibfield{shortbooktitle}, \bibfield{shorthand},
\bibfield{shorttitle}, and \bibfield{shortmaintitle}.

\optitem[false]{sentencecase}{\opt{true}, \opt{false}}

\noindent Short for \opt{sentencecase:title}.

\optitem[false]{sentencecase:<field>}{\opt{true}, \opt{false}}

\noindent This option puts titles in sentence-style capitalization,
also called sentence case (see \textit{CMOS} 8.158), whereby the first
letter is uppercase and subsequent letters are lowercase. Supported
values of \bibfield{<field>}: \bibfield{title}, \bibfield{blogtitle},
\bibfield{bookbooktitle}, \bibfield{booktitle}, \bibfield{issuetitle},
\bibfield{journal}, \bibfield{journaltitle}, \bibfield{maintitle},
\bibfield{origtitle}, \bibfield{shortbooktitle}, \bibfield{shorthand},
\bibfield{shorttitle}, and \bibfield{shortmaintitle}.

\optitem[false]{skipdate}{\opt{true}, \opt{false}}

\noindent On rare occasions, you may need an entry in a reference list
to skip the \textit{date}. See section \ref{entrytypes} for examples.

\optitem[false]{swapauth}{\opt{true}, \opt{false}}

\noindent To swap the places of a book's author with an editor or
translator, use \opt{swapauth}. This option works for \bibtype{book},
\bibtype{bookinbook}, \bibtype{collection}, \bibtype{inbook}, and
\bibtype{incollection} entry types. For more information, see section
\ref{editors:swap}.

\optitem[false]{swaptrans}{\opt{true}, \opt{false}}

\noindent According to \textit{CMOS}, if a work has an editor and a
translator, their names should appear in citations in the order in
which they appear on the work's title page (see \textit{CMOS}
\ref{14.104}). By default, the style lists editors first. The option
\bibfield{swaptrans} reverses this order: Their translators print
first. If a work's translators and editors are the same,
\bibfield{swaptrans} reverses their roles, say, from \textit{edited
and translated by} to \textit{translated and edited by}. The same goes
for compilers, expanders, revisers, and updaters---all of whom the
style treats as specialized editors. For editors and translators of an
\bibfield{issuetitle}, \bibfield{maintitle}, or \bibfield{series}, see
their respective options below. See also section \ref{editors:swap}.

\optitem[false]{swaptrans:book}{\opt{true}, \opt{false}}

A short form of \opt{swaptrans:booktitle}. See below.

\optitem[false]{swaptrans:bookbook}{\opt{true}, \opt{false}}

A short form of \opt{swaptrans:bookbooktitle}. See below.

\optitem[false]{swaptrans:bookbooktitle}{\opt{true}, \opt{false}}

Like \opt{swaptrans} but narrower in scope. It applies only to the
editors and translators of a \bibfield{bookbooktitle} (a double
cross-referenced \bibfield{title}). See section \ref{editors:swap}.

\optitem[false]{swaptrans:booktitle}{\opt{true}, \opt{false}}

Like \opt{swaptrans} but narrower in scope. It applies only to the
editors and translators of a \bibfield{booktitle} (a cross-referenced
\bibfield{title}). See section \ref{editors:swap}.

\optitem[false]{swaptrans:issue}{\opt{true}, \opt{false}}

A short form of \opt{swaptrans:issuetitle}. See below.

\optitem[false]{swaptrans:issuetitle}{\opt{true}, \opt{false}}

Like \opt{swaptrans} but for editors and translators of an
\bibfield{issuetitle}.

\optitem[false]{swaptrans:main}{\opt{true}, \opt{false}}

A short form of \opt{swaptrans:maintitle}. See below.

\optitem[false]{swaptrans:maintitle}{\opt{true}, \opt{false}}

Like \opt{swaptrans} but for editors and translators of a
\bibfield{maintitle}.

\optitem[false]{swaptrans:series}{\opt{true}, \opt{false}}

Like \opt{swaptrans} but for editors and translators of a
\bibfield{series}.

\optitem[false]{swaptrans:title}{\opt{true}, \opt{false}}

Like \opt{swaptrans} but narrower in scope. It applies only to the
editors and translators of a \bibfield{title}, whereas
\bibfield{swaptrans} also affects those of a \bibfield{booktitle} (a
cross-referenced \bibfield{title}) and a \bibfield{bookbooktitle} (a
double cross-referenced \bibfield{title}). See section
\ref{editors:swap}.

\optitem[false]{swapvol}{\opt{true}, \opt{false}}

\noindent As an entry option, \opt{swapvol} does on a case-by-case
basis what the \opt{swapvol} preamble option does globally: When set
to true, it changes the format of a work in a collection so that, in
bibliographies and long citations, publication information for the
collection precedes that of the volume. For more information, see
section \ref{collorder}.

\optitem[true]{url}{\opt{true}, \opt{false}}

\noindent Set \opt{false} to prevent the \bibfield{url} field from
printing.

\end{optionlist}

\subsection{Citation Commands}

Windy City supports most of the citation commands familiar from
\biblatex, plus a small set of custom commands for tricky situations.

\subsubsection{Standard Citation Commands}
\label{std.cmd}

The following list, though not exhaustive, shows the most important
citation commands from \biblatex that Windy City supports:

\begin{ltxsyntax}
\cmditem{autocite}[prenote][postnote]{key}
\cmditem{autocites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{cite}[prenote][postnote]{key}
\cmditem{cite*}[prenote][postnote]{key}
\cmditem{cites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{cites*}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{footcite}[prenote][postnote]{key}
\cmditem{footcite*}[prenote][postnote]{key}
\cmditem{footcites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{footcites*}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{footfullcite}[prenote][postnote]{key}
\cmditem{footfullcite*}[prenote][postnote]{key}
\cmditem{fullcite}[prenote][postnote]{key}
\cmditem{fullcite*}[prenote][postnote]{key}
\cmditem{nocite}{key}
\cmditem*{nocite}|\{*\}|
\cmditem{parencite}[prenote][postnote]{key}
\cmditem{parencite*}[prenote][postnote]{key}
\cmditem{parencites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{smartcite}[prenote][postnote]{key}
\cmditem{smartcite*}[prenote][postnote]{key}
\cmditem{smartcites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{smartcites*}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{textcite}[prenote][postnote]{key}
\cmditem{textcites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{textcites*}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\end{ltxsyntax}

\noindent New users should get comfortable with \cmd{cite} and
\cmd{footcite} (for notes) and \cmd{parencite} (for parenthetical
citations). Their multicite forms---\cmd{cites}, \cmd{footcites}, and
\cmd{paren\-cites}---take comma-separated lists of entry keys, while
allowing you to specify distinct \bibfield{prenote} and
\bibfield{postnote} fields for each work.

Use \cmd{nocite} to add works to bibliographies even if you haven't
cited them in the text with citations commands. Use it with an
asterisk to add every work in every \file{bib} file that your document
loaded with \cmd{addbibresource} or \cmd{bibliography}.

Windy City sets the \opt{autocite} preamble option to \opt{footnote},
which makes \cmd{autocite} equivalent to \cmd{smartcite}. The latter
runs different citation commands in different contexts. In Windy City,
\cmd{smartcite} is equivalent to \cmd{footcite} in a document's body
and \cmd{cite} in footnotes and endnotes.\footnote{In a \env{minipage}
environment, \cmd{smartcite} is equivalent to \cmd{cite}. To use
\cmd{smartcite} with endnotes, use the \sty{endnotes} package.} If you
set the \opt{autocite} preamble option to \opt{inline}, \cmd{autocite}
is equivalent to \cmd{parencite}. If you set it to \opt{plain},
\cmd{autocite} is equivalent to \cmd{cite}.

\begin{ltxsyntax}

\cmditem{cite*}[prenote][postnote]{key}

Use this command to cite a work without printing anything in the
author's position. It comes in handy when the context makes the
author's name clear. From \textit{CMOS} \ref{14.78}:

\begin{citebib}
\item \cite*[233]{franklin1868}
\item \cite*[234]{franklin1868}
\end{citebib}

\cmditem{parencite*}[prenote][postnote]{key}

Like \cmd{parencite} but suppresses the author's position---useful in
passages where the author receives explicit mention. Here's an example
from \textit{CMOS} \ref{15.25}:

\begin{quote} Fiorina et al. \parencite*{fiorina2005} and Fischer and
Hout \parencite*{fischer2006} reach more or less the same conclusions.
In contrast, Abramowitz and Saunders \parencite*{abramowitz2005}
suggest that the mass public is deeply divided between red states and
blue states and between churchgoers and secular voters. \end{quote}

The source for the passage above contains:

\begin{verbatim}
   \begin{quote} Fiorina et al. \parencite*{fiorina2005}... Fischer
   and Hout \parencite*{fischer2006}... Abramowitz and Saunders
   \parencite*{abramowitz2005}... \end{quote}
\end{verbatim}

\cmditem{textcite}[prenote][postnote]{key}

Use \cmd{textcite} for in-text citations. Here's an example from
\textit{CMOS} 13.65:

\begin{quote} ``If an astronaut falls into a black hole, its mass will
increase, but eventually the energy equivalent of that extra mass will
be returned to the universe in the form of radiation. Thus, in a
sense, the astronaut will be `recycled'''
\mkbibparens{\textcite[112]{hawking1988}}. \end{quote}

The source for the passage above contains:

\begin{verbatim}
   \begin{quote} ``If an astronaut falls into a black hole...''
   \mkbibparens{\textcite[112]{hawking1988}}. \end{quote}
\end{verbatim}

Note that \cmd{textcite} doesn't enclose citations in parentheses but
does drop the final period that standard citations usually end with.
The parentheses above come from \cmd{mkbibparens}, which switches the
note's internal parentheses to brackets.

\cmditem{textcite*}[prenote][postnote]{key}

Like \cmd{textcite} but suppresses the author's position. From
\textit{CMOS} 13.65:

\begin{quote} In their introduction to \textcite*{tocqueville1999},
translators Harvey Mansfield and Delba Winthrop write that Tocqueville
``shows that the people are sovereign, whether through the
Constitution or despite it, and he warns of the tyranny of the
majority'' \parencite[xvii]{tocqueville1999}. \end{quote}

The source for the passage above contains:

\begin{verbatim}
   \begin{quote} In their introduction to \textcite*{tocqueville1999}
   ...\parencite[xvii]{tocqueville1999}. \end{quote}
\end{verbatim}

\end{ltxsyntax}

\subsubsection{Custom Commands: \emph{\cmd{idemcite}}}
\label{idemcite}

This family of citation commands isn't strictly necessary but makes
some citations simpler than they would be with standard commands.

\begin{ltxsyntax}
\cmditem{idemcite}[prenote][postnote]{key}
\cmditem{idemcites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\cmditem{footidemcite}[prenote][postnote]{key}
\cmditem{footidemcites}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\end{ltxsyntax}

Perhaps the best use case for these commands is the example in
\textit{CMOS} \ref{14.57}. The sources mentioned in a passage receive
long citations with shortened names:

\begin{quote} Only when we gather the work of several
scholars---Walter Sutton's explications of some of Whitman's shorter
poems; Paul Fussell's careful study of structure in ``Cradle''; S. K.
Coffman's close readings of ``Crossing Brooklyn Ferry'' and ``Passage
to India''; and the attempts of Thomas I. Rountree and John Lovell,
dealing with ``Song of Myself'' and ``Passage to India,''
respectively, to elucidate the strategy in ``indirection''---do we
begin to get a sense of both the extent and the specificity of
Whitman's forms.\footnotemark[1] \end{quote}

\begin{citenobib}
\item \idemcites{sutton1959,fussell1962,coffman1954,coffman1955,rountree1958}[and][]{lovell1960}
\end{citenobib}

Without commands like \cmd{idemcite}, there's often no easy way to
tell Windy City to shorten names. The preamble option
\opt{idemtracker} helps with consecutive citations of the same author,
but that's no use when you want to shorten names because you've
mentioned them in the text.

Nevertheless, standard commands can reproduce the example in at least
three ways:

\begin{verbatim}
   \footnote{\cites*[Sutton,][]{sutton1959}[Fussell,][]{fussell1962}...
   \footcites*[Sutton,][]{sutton1959}[Fussell,][]{fussell1962}...
   \footnote{Sutton, \cite*{sutton1959}; Fussell, \cite*{fussell1962}...
\end{verbatim}

\noindent They're ugly workarounds, but they work.

With \cmd{idemcites} and \cmd{footidemcites}, on the other hand, you
have simpler alternatives that make your intentions clearer and your
file easier to read:

\begin{verbatim}
   \footnote{\idemcites{sutton1959,fussell1962,...}[and][]{lovell1960}}
   \footidemcites{sutton1959,fussell1962,...}[and][]{lovell1960}
   \footnote{\idemcite{sutton1959}; ... and \idemcite{lovell1960}}
\end{verbatim}

Notice that the only reason to use \cmd{footidemcites} rather than
\cmd{footidemcite} is to insert \textit{and} before the last citation.

\subsubsection{Custom Commands: \emph{\cmd{parenauth}}}
\label{parenauth}

You may prefer to omit the year from parenthetical citations if the
context makes it clear or if the inclusion of \textit{n.d.} (for
\textit{no date}) seems unnecessary. Omit the year with
\cmd{parenauth} and \cmd{parenauths}.

\begin{ltxsyntax}
\cmditem{parenauth}[prenote][postnote]{key}
\cmditem{parenauths}(multiprenote)(multipostnote)[prenote][postnote]{key}|...|[prenote][postnote]{key}
\end{ltxsyntax}

As with \cmd{parencite*} and \cmd{parencites*}, use these commands
with care. Dropping the year from parenthetical citations could result
in bad output, such as empty parentheses or ambiguous references. From
\textit{CMOS} \ref{15.54}.

\begin{quote}
Alvin Johnson, in a memorandum prepared sometime in 1937
\parenauth[file 36]{kallen}, observed that\ldots
\end{quote}

\subsection{Entry Types}
\label{entrytypes}

You may assign any work to one of the core entry types in the list
below or to one of their so-called ``type aliases,'' which, minor
differences aside, give the same output. If an entry has a type other
than the ones listed below, Windy City processes it as a
\bibtype{book}.

\begin{typelist}
\RaggedRight

\typeitem{article}

Type alias: \bibtype{periodical}

\typeitem{artwork}

Type alias: \bibtype{image}

\typeitem{book}

Type aliases: \bibtype{booklet}, \bibtype{manual}, \bibtype{mvbook},
\bibtype{mvcollection}, \bibtype{proceedings}, \bibtype{report},
\bibtype{techreport}

\typeitem{collection} No type aliases

\typeitem{inbook}

Type alias: \bibtype{bookinbook}

\typeitem{incollection}

Type aliases: \bibtype{conference}, \bibtype{inproceedings},
\bibtype{suppbook}, \bibtype{suppcollection}

\typeitem{letter} No type aliases
\typeitem{misc} No type aliases
\typeitem{online}

Type aliases: \bibtype{electronic}, \bibtype{www}

\typeitem{patent} No type aliases

\typeitem{reference}

Type alias: \bibtype{inreference}

\typeitem{review} No type aliases

\typeitem{standard} No type aliases

\typeitem{thesis}

Type aliases: \bibtype{mastersthesis}, \bibtype{phdthesis}

\typeitem{unpublished} No type aliases

\end{typelist}

Aliases don't always have the same functions, even when they're fully
interchangeable. The difference, though, might be just conceptual. For
example, articles in a periodical should take the \bibtype{article}
entry type rather than \bibtype{periodical}---not because there's any
difference in output, but because, if only in principle, the latter is
for citing the periodical itself, not its contents. If you want to
save some lines in your bibliography database, use it for a periodical
when you cite multiple articles from that source.

The same is true for the \bibtype{inreference} and \bibtype{reference}
entry types. You may cross-reference \bibtype{inreference} entries to
\bibtype{reference} entries, but they're otherwise equivalent. Take an
example from \textit{CMOS} \ref{14.232}:

\begin{citenobib}
\item \cite{salvation1980}
\end{citenobib}

\noindent One way to get that output is to cross-reference an
\bibtype{inreference} entry (for the article) to a \bibtype{reference}
entry (for the encyclopedia):\footnote{Incidentally, reference works
don't always have titles in italics. When necessary, you need to set
italics in your bibliography database.}

\begin{verbatim}
   @InReference{salvation1980,
     title = {salvation},
     crossref = {britannica1980}
   }
   @Reference{britannica1980,
     organization = {{\emph{Encyclopaedia Britannica}}},
     edition = {15},
     year = {1980}
   }
\end{verbatim}

\noindent But you could also have a single entry of either type:

\begin{verbatim}
   @Reference{salvation1980,
     organization = {{\emph{Encyclopaedia Britannica}}},
     edition = {15},
     title = {salvation},
     year = {1980}
   }
\end{verbatim}

On the differences between the \bibtype{thesis},
\bibtype{mastersthesis}, and \bibtype{phdthesis} entry types, see
section \ref{stdfields}.

For unusually complicated citations, or those just not supported by
the style, consider using the \bibtype{misc} entry type. The style
handles these entries in way that makes it a fallback for almost
anything. The example below is from \textit{CMOS} 14.264:

\begin{citebib}
\item \cite{roosevelt1959}
\end{citebib}

\noindent This work's database entry contains most of its information
in \bibfield{usera} (for notes) and \bibfield{userb} (for
bibliographies). The \bibfield{title} field needs manual formatting,
since works of this type may have titles in italics or quotation
marks.

\begin{verbatim}
   @Misc{roosevelt1959,
     author = {Roosevelt, Eleanor},
     title = {\mkbibquote{Is America Facing World Leadership?}},
     usera = {convocation speech, Ball State Teacher's College, May 6,
              \thefield{year}, radio broadcast, reel-to-reel tape,
              MPEG copy, 1:12:49},
     userb = {Convocation Speech. Ball State Teacher's College. May 6,
              \thefield{year}. Radio broadcast. Reel-to-reel tape.
              MPEG copy. 1:12:49},
     url = {http://libx.bsu.edu/cdm4/singleitem/collection/ElRoos/id
            /1},
     year = {1959}
   }
\end{verbatim}

You may also use the \bibtype{misc} entry type to cross-reference
entries in a bibliography, as in \textit{CMOS} \ref{14.81} and
\ref{14.82}.

\begin{bibonly}
\nocite{ashe,creasey1976,creasey1978,creasey1966,morton,york}
\end{bibonly}

\noindent Here's the \bibtype{misc} entry for one of the
cross-references above:

\begin{verbatim}
   @Misc{ashe,
     options = {skipdate},
     author = {Ashe, Gordon},
     userb = {\emph{See} Creasey, John}
   }
\end{verbatim}

\noindent The option \opt{skipdate} is necessary only if you plan to
format your bibliography as a reference list. It prevents Windy City
from printing \textit{n.d.} (for \textit{no date}) after the author's
position.

Use \cmd{nocite} with the \bibtype{misc} entries to add them to your
bibliography, then cite the remaining entries as usual.

For examples of automatic cross-referencing in notes and
bibliographies see section \ref{notes} (\ref{14.108}), section
\ref{paren} (\ref{15.42}), and section \ref{collections}.

\subsection{Data Fields}
\label{datafields}

Windy City relies on a small number of data fields that aren't
recognized by \BibTeX\ or \biblatex. It also uses some standard ones
in perhaps unexpected ways.

\subsubsection{Standard Data Fields}
\label{stdfields}

Examples in this document don't always make it clear how Windy City
uses standard data fields. The list below highlights a selection of
fields that merit special attention.

\begin{marglist}

\item[authortype] This field takes three values: \textit{anon} (to
print an anonymous author's name in brackets), \textit{anon?} (to add
a question mark inside the brackets), and \textit{pseudo} (to print
\textit{pseud.} in brackets after the name of a pseudonymous author).
From \textit{CMOS} \ref{14.79}:

\begin{citebib}
\item \cite{horsley1796}
\item \cite{hawkes1834}
\end{citebib}

For pseudonymous authors, another solution is to use the
\bibfield{nameaddon} field. Unlike with \bibfield{authortype},
\bibfield{nameaddon} allows you to include an author's given name in
the brackets. For examples, see \textit{CMOS} \ref{14.81}.

\item[edition] To indicate a numbered edition of a work, put the
edition's number in this field---for example, \textit{2} for a second
edition. To indicate a revised edition, enter either \textit{revised}
or \textit{rev. ed.} Both options give the same output. For expanded
and updated editions, you may use \textit{expanded} or
\textit{updated}. Add additional data as necessary. In the following
example from \textit{CMOS} bibliography 2.4, \bibfield{edition}
contains \textit{updated edition by Arlene O'Sean and Antoinette
Schleyer}:

\begin{bibonly}
\nocite{swanson1999}
\end{bibonly}

\noindent You may also use the field to indicate a newspaper's
edition, such as \textit{Sunday Book Review} (see \textit{CMOS}
\ref{14.202}).

\item[eprint] Windy City supports the built-in resources that
\biblatex provides for electronic publishing information, even though
the output doesn't conform to \textit{CMOS}. To that end, you may use
the \bibfield{eprint} field, along with its cousins
\bibfield{eprinttype} and \bibfield{eprintclass}, and associated
options (\opt{eprint}, \opt{doi}, and \opt{url}), all of which are set
to \textit{true} by default.

\item[issue] Windy City uses this field with \bibtype{article},
\bibtype{online}, and \bibtype{review} entry types (and their aliases)
to record a work's season of publication (spring, summer, autumn/fall,
winter). The \bibtype{date} field also records seasons---but the value
\textit{23}, for the third season, returns \textit{Autumn}. To print
\textit{Fall}, use the \bibfield{issue} field. In other words, for
\textit{Fall 2013}, a work's bibliography database entry should
contain:

\begin{verbatim}
   issue = {Fall},
   date = {2013},
\end{verbatim}

\noindent Whereas for \textit{Autumn 2013}, use either:
%, put either \textit{2013-23} in \bibfield{date} or:

\begin{verbatim}
   date = {2013-23},
\end{verbatim}

\noindent Or:

\begin{verbatim}
   issue = {Autumn},
   date = {2013},
\end{verbatim}

\noindent Note that when \bibfield{date} contains just a year of
publication, you may use the classic \bibfield{year} field.

\item[label] The publication year of a work is usually easy for Windy
City to determine. It simply reads the \bibfield{date} or
\bibfield{year} field of a work's bibliography database entry. But
sometimes, especially when works with different publication dates are
cross-referenced, the style needs to make difficult choices. If it
picks the wrong year, you can override the error by putting the
correct one in the \bibfield{label} field.

\item[pages] See comments on the \opt{nopages} preamble option in
section \ref{preamble}.

\item[pubstate] This fields indicates when a work is forthcoming (with
value \textit{forthcoming}), a preprint (with value
\textit{preprint}), a working paper (with value \textit{working}), or
an electronic article published ahead of the official publication date
(with value \textit{prepub}). A preprint or working paper needs an
\bibtype{unpublished} entry in your bibliography database (see
\textit{CMOS} \ref{14.173} and \ref{14.218}). A prepublication should
have an \bibtype{article} or \bibtype{periodical} entry (see
\textit{CMOS} \ref{14.172}). For forthcoming works, see \textit{CMOS}
\ref{14.146}, \ref{14.172}, and \ref{15.45}. Forthcoming works also
print correctly with \textit{forthcoming} in the \bibfield{year}
field.

\begin{bibonly}
\nocite{faraday,huang2015,jubb2015,lucki1980}
\end{bibonly}

\item[shorthand] Windy City doesn't automatically italicize a
\bibfield{shorthand}. Per \textit{CMOS} 14.60, a shorthand should be
italicized if the title that it abbreviates is italicized. Set it in
the bibliography database with \cmd{emph} or \cmd{mkbibemph}. For
examples of a \bibfield{shorthand}, see section \ref{14.59} and the
first citation of \textit{CMOS} in this document's introduction.

\item[shorthandintro] You may override the default announcement of a
\bibfield{shorthand} by adding your preferred content to
\bibfield{shorthandintro}. See the first citation of \textit{CMOS} in
this document's introduction, where the announcement isn't a note in
parentheses but its own sentence.

\item[titleaddon] Like \bibfield{nameaddon}, this field encloses its
content in brackets. This is especially useful for translated titles.
From \textit{CMOS} \ref{14.99}:

\begin{citebib}
\item \cite{wereszycki1977}; includes a summary in German.
\item \cite{pirumova1977b}
\end{citebib}

\item[type] With the \bibtype{thesis} entry type, Windy City uses
\bibfield{type} to distinguish a Master's thesis from a PhD
dissertation. For the latter, \bibtype{type} should have the value
\textit{phdthesis} or \textit{PhD diss.} For the former, use
\textit{mathesis} or \textit{master's thesis}. Indicate other types of
thesis by entering the appropiate value in the field, such as
\textit{bachelor's thesis} or \textit{undergraduate thesis}. No
\bibfield{type} field is needed for the \bibtype{mathesis} and
\bibtype{phdthesis} entry types.

In rare cases, \bibfield{type} is necessary for \bibtype{article} and
\bibtype{review} entry types (and their aliases) when a work's
bibliographic information doesn't allow Windy City to distinguish a
journal article from a magazine or newspaper article. This happens
when a magazine or newspaper article has an issue number. Normally,
Windy City prints an issue number before the date and encloses the
date in parentheses. But for magazine and newspaper articles, the
issue number should go first, and the date shouldn't be in
parentheses. The workaround is to include a \bibfield{type} field with
the value \textit{newsmag}. For an example, see \textit{CMOS}
\ref{14.204} and compare it with the citation of Beattie in
\ref{14.171}.

\end{marglist}

\subsubsection{Nonstandard Data Fields}

Some of Windy City's nonstandard data fields are for its internal
handling of cross-referencing. Those fields aren't listed below, as
they're not usually meant for use in a bibliography database (but see
section \ref{editors:other}). The rest store information that's
crucial for correct formatting. Without them, quite a few citations in
this document wouldn't match their counterparts in \textit{CMOS}.

\begin{marglist}

\item[\smash{\tshortstack[l]{blogtitle\\blogsubtitle}}] The name of a
blog goes in \bibfield{blogtitle} and \bibfield{blogsubtitle}. Keep in
mind that blog posts take the usual \bibfield{title} and
\bibfield{subtitle} fields.

\item[collection] Use this field with \bibtype{unpublished} works for
names of manuscript collections. See examples in \textit{CMOS}
\ref{14.222}, \ref{14.229}, and \ref{14.230}.

\item[editoraddon] This field holds editorial information about a work
that belongs immediately after \bibfield{editor} has printed, without
intervening punctuation. For an example, see \textit{CMOS}
\ref{14.105}, where the citation of \textit{Chaucer Life-Records}
includes: ``from materials compiled by John M. Manly and Edith
Richert, with the assistance of Lilian J. Redstone et al.'' This field
doesn't print when \bibfield{editor} prints in the author's position.
As a result, options that may affect where \bibfield{editor} prints,
such as \opt{swaptrans} and \opt{swapauth}, may affect whether
\bibfield{editoraddon} prints.

% The main function of 'editoraaddon' is to inherit 'editoraddon'
% during cross-referencing. I don't expect anyone to use it in a
% bibliography database.

%\item[editoraaddon] Like \bibfield{editoraddon} but for
%\bibfield{editora}.

\item[seriesaddon] This field is for additional information about a
book's series. That includes information about the run of a series,
such as \textit{2nd ser.} and \textit{n.s.} For examples, see
\textit{CMOS} \ref{14.123} and \ref{14.126}. Keep in mind that, for
journals, which occasionally have a series but no series name,
information like \textit{2nd ser.} and \textit{n.s.} go in the
\bibfield{series} field.

\item[shortcollection] Similar to \bibfield{shorttitle} but for the
short name of a \bibfield{collection}.

\item[shortmaintitle] This field contains the short form of a
\bibfield{maintitle}. It should only be necessary for certain works in
collections. See the citation of \textit{The Complete Tales of Henry
James} in section \ref{multivolume}.

\item[typeaddon] In bibliography entries of \bibtype{unpublished}
works, this field adds arbitrary content after the \bibfield{type}
field. To replicate examples in \textit{CMOS} \ref{14.217}, use
\bibfield{typeaddon} with the value \textit{presented at the}:

\begin{bibonly}
\nocite{hong2015}
\nocite{teplin2005}
\end{bibonly}

\noindent For \textit{CMOS} \ref{14.216}, \bibfield{typeaddon}
contains \textit{last modified}, preceded by a comma and a space:

\begin{citebib}
\item \cite{balderdash2017}
\end{citebib}

\end{marglist}

\section{Editors and Translators}
\label{editors}

Windy City offers significant control over the handling of editors and
translators. Taking advantage of it, however, may not seem intuitive
at first. This section covers all the relevant features and options.

\subsection{Types of Editors and Translators}

Windy City has four name lists for editors (\bibfield{editor},
\bibfield{editora}, \bibfield{editorb}, and \bibfield{editorc}) and
three name lists for translators (\bibfield{translator},
\bibfield{translatora}, and \bibfield{translatorb}). At points where
it's prepared to print them, it cycles through one or both sets of
lists, depending on the context, looking for names to print. The set
of editors starts with \bibfield{editor}, followed by
\bibfield{editora}, and so on. The set of translators starts with
\bibfield{translator}, followed by \bibfield{translatora}, and so on.
Editors precede translators, unless you reverse the order with a
\opt{swaptrans} entry option (see section \ref{editors:swap}). Within
each set, the style prints the first name list that meets its criteria
for that context. Apart from exceptions discussed below, you can
assign any editor or translator name list to any \bibfield{title},
\bibfield{issuetitle}, \bibfield{maintitle}, or \bibfield{series}.

\subsubsection{The Basics}
\label{editors:basics}

In most cases, you'll assign editors and translators to a
\bibfield{title}. Since it's the default assignment, you can do this
just by adding the \bibfield{editor} and \bibfield{translator} fields
to a database entry. The entry below is an example from \textit{CMOS}
\ref{14.104}:

\begin{verbatim}
   @Collection{adorno1999,
     author = {Adorno, Theodor W. and Benjamin, Walter},
     title = {The Complete Correspondence, 1928–1940},
     editor = {Lonitz, Henri},
     translator = {Walker, Nicholas},
     address = {Cambridge, MA},
     publisher = {Harvard University Press},
     year = {1999}
   }
\end{verbatim}

\begin{citebib}
\item \cite{adorno1999}
\end{citebib}

\noindent When the style processes this entry, it identifies the
editor and translator of the work with the names in the
\bibfield{editor} and \bibfield{translator} fields. Since the entry
doesn't use \opt{swaptrans}, the resulting output lists the editor and
translator, in that order, after the authors and title.

Cross-referencing introduces a bit more complexity, but the principle
is the same: Within the scope of an entry, the style associates
\bibfield{editor} and \bibfield{translator} with \bibfield{title}. In
this example from \textit{CMOS} \ref{14.30}, an essay is
cross-referenced to a collection:

\begin{verbatim}
   @InCollection{kaiser1964,
     author = {Kaiser, Ernest},
     title = {The Literature of Harlem},
     shorttitle = {Literature of Harlem},
     crossref = {clarke1964}
   }
   @Collection{clarke1964,
     editor = {Clarke, J. H.},
     title = {Harlem},
     subtitle = {A Community in Transition},
     address = {New York},
     publisher = {Citadel Press},
     year = {1964}
   }
\end{verbatim}

\begin{citebib}
\item \cite{kaiser1964}
\end{citebib}

\noindent Since \bibfield{editor} appears within the
\bibtype{collection} entry, Windy City associates the editor's name
with \textit{Harlem}. If you moved \bibfield{editor} from
\bibtype{collection} to \bibtype{incollection}, the association would
change to \textit{The Literature of Harlem}.

Consider another example:

\begin{citebib}
\item \cite{petrarca1948}
\end{citebib}

\noindent Hans Nachod translated ``The Ascent of Mont Ventoux,'' among
other works in the collection, but not \textit{every} work in the
collection. Thus, the \bibfield{translator} field must fall within the
scope of the \bibtype{incollection} entry:

\begin{verbatim}
   @InCollection{petrarca1948,
     author = {Petrarca, Francesco},
     title = {The Ascent of Mont Ventoux},
     translator = {Nachod, Hans},
     pages = {36–46},
     crossref = {cassirer1948}
   }
   @Collection{cassirer1948,
     editor = {Cassirer, Ernst and Kristeller, Paul Oskar and Randall,
               Jr., John Herman},
     title = {The Renaissance Philosophy of Man},
     address = {Chicago},
     publisher = {University of Chicago Press},
     year = {1948}
   }
\end{verbatim}

\noindent By the same token, since \bibfield{editor} falls within the
scope of \bibtype{collection}, the style associates it with
\textit{The Renaissance Philosophy of Man}, not ``The Ascent of Mont
Ventoux.''

Windy City supports a second tier of editors after \bibfield{title},
\bibfield{issuetitle}, \bibfield{maintitle}, and \bibfield{series}.
Again, in your bibliography database, make sure to list editors in the
proper order: \bibfield{editor} before \bibfield{editora}, and so on.
Second tier editors never print in the author's position, even when
the first does. They always print after the relevant title.

In the examples below, the editors print correctly because there's no
ambiguity about which title they're responsible for. Both fall within
the same entry, \bibfield{carter2012}, where their default assignment
is \textit{A Performer's Guide}. Citing a child entry,
\bibfield{myers2012}, places the editors after the collection's title,
starting with \bibfield{editor}, whereas citing the parent places
\bibfield{editor} in the author's position and \bibfield{editora}
after the collection's title.

\begin{verbatim}
   @InCollection{myers2012,
     author = {Myers, Herbert},
     title = {Pitch and Transposition},
     pages = {375--393},
     crossref = {carter2012}
   }
   @Collection{carter2012,
     title = {A Performer's Guide to Seventeenth-Century Music},
     editor = {Carter, Stewart},
     editora = {Kite-Powell, Jeffery},
     editoratype = {revex},
     address = {Bloomington},
     publisher = {Indiana University Press},
     year = {2012}
   }
\end{verbatim}

\begin{bibonly}
\nocite{myers2012,carter2012}
\end{bibonly}

As the examples above also indicate, the style supports a variety of
editorial roles beyond just editor and translator. They are: compiler,
expander, reviser, and updater. To assign them, use the editor and
translator type fields. Below are some bibliography database entries
for examples in \textit{CMOS} \ref{14.103} and \ref{14.142}:

\begin{verbatim}
   @Book{schechter2011,
     editor = {Schechter, Harold, and Kurt Brown},
     editortype = {compiler},
     title = {Killer Verse},
     subtitle = {Poems of Murder and Mayhem},
     address = {London},
     publisher = {Everyman Paperback Classics},
     year = {2011}
   }
   @Book{turabian2013,
     author = {Turabian, Kate L.},
     title = {A Manual for Writers of Term Papers, Theses, and
              Dissertations},
     edition = {8},
     editor = {Booth, Wayne C. and Colomb, Gregory G. and
               Williams, Joseph M. and {the University of Chicago
               Press Staff}},
     editortype = {reviser},
     address = {Chicago},
     publisher = {University of Chicago Press},
     year = {2013}
   }
\end{verbatim}

\begin{citebib}
\item \cite{schechter2011}
\item \cite{turabian2013}
\end{citebib}

You may combine all six editorial roles in pairs. A work's editor, for
example, can also be its translator, compiler, expander, reviser, or
updater---but no more than one of these. Simply put the proper value
in the corresponding type field. We saw this with \textit{A
Performer's Guide}, where the bibliography string \textit{revex}
identified Jeffery Kite-Powell as the work's reviser and expander.
These are the key lines:

\begin{verbatim}
   editora = {Kite-Powell, Jeffery},
   editoratype = {revex},
\end{verbatim}

\noindent Combinations that involve a translator's role, such as
\textit{translated and compiled by}, respond to the \opt{swaptrans}
options discussed in section \ref{editors:swap}. For these dual roles,
however, it's probably less confusing in the long run to change values
in the editor and translator type fields. The choice is yours. Table
\ref{editors:table} lists all editor and translator roles.

\begin{table}[H]
\begin{tabular}{@{}r l r l@{}}
\bibfield{editortype} & Assignment & \bibfield{editortype} & Assignment\\
\toprule
compiler & compiler & reviser & reviser\\
comped & compiler and editor & revcomp & reviser and compiler\\
compex & compiler and expander & reved & reviser and editor\\
comprev & compiler and reviser & revex & reviser and expander\\
comptrans & compiler and translator & revtrans & reviser and translator\\
compup & compiler and updater & revup & reviser and updater\\
editor & editor & translator & translator\\
edcomp & editor and compiler & transcomp & translator and compiler\\
edex & editor and expander & transed & translator and editor\\
edrev & editor and reviser & transex & translator and expander\\
edtrans & editor and translator & transrev & translator and reviser\\
edup & editor and updater & transup & translator and updater\\
expander & expander & updater & updater\\
excomp & expander and compiler & upcomp & updater and compiler\\
exed & expander and editor & uped & updater and editor\\
exrev & expander and reviser & upex & updater and expander\\
extrans & expander and translator & uprev & updater and reviser\\
exup & expander and updater & uptrans & updater and translator\\
\end{tabular}
\caption{}\label{editors:table}
\end{table}

For examples in \textit{CMOS} that use values from Table
\ref{editors:table}, we need to turn to the book's bibliography. The
first example below shows the effect of \textit{reved}, the second of
\textit{revup}.

\begin{citebib}
\item \cite{fowler1965}
\item \cite{gowers2015}
\end{citebib}

For editors and translators with more than two roles per title, you
need to print more than one name list, either an editor name list and
a translator name list or two editor names lists (see the previous
discussion of second tier editors). This allows for complex
assignments such as ``Edited and Translated by Jane Doe. Revised and
Updated by Jane Doe and John Smith.'' What's not allowed is listing
three or more roles at once, as in ``Edited, Translated, and Revised
by Jane Doe.''

Along with the values in Table \ref{editors:table}, you may also use
\textit{anon}, \textit{anon?}, and \textit{pseudo} in editor and
translator type fields to indicate anonymous and pseudonymous editors
and translators. For examples using these values with the
\bibfield{authortype} field, see section \ref{stdfields} and
\textit{CMOS} \ref{14.79} and \ref{15.34}.

\subsubsection{Other Options and Titles}
\label{editors:other}

Windy City simplifies the assignments of editors and translators in
several ways. For one, the default assignment of every editor name
list is \textit{editor}, and the default assignment of every
translator name list is \textit{translator}. As a result, you never
need to use the values \textit{editor} or \textit{translator} in the
type fields. It's strictly optional. The name fields alone set the
correct assignment.

Much the same holds when the editor and translator of a work are the
same. The usual way to set this assignment is with identical name
lists:

\begin{verbatim}
   editor = {Doe, Jane},
   translator = {Doe, Jane},
\end{verbatim}

\noindent This gives a default assignment of \textit{editor and
translator} (\textit{edtrans} from Table \ref{editors:table}), unless you
use the appropriate \opt{swaptrans} entry option, which gives
\textit{translator and editor} (\textit{transed} from Table
\ref{editors:table}). No editor or translator type field is necessary.

When type fields are required, Windy City offers flexibility over how
you structure your bibliography entries: If you like, you can set the
assignment with just one editor or translator type field and its
corresponding name field, or with both name fields and one type field,
or with both name fields and both type fields. To set Jane Doe as the
compiler and translator of a \bibfield{title}, Windy City treats all
five options below as equivalent:

\begin{enumerate}[itemsep=0.2\baselineskip]

\item

\begin{verbatim}
   editor = {Doe, Jane},
   editortype = {comptrans},
\end{verbatim}

\item

\begin{verbatim}
   translator = {Doe, Jane},
   translatortype = {comptrans},
\end{verbatim}

\item

\begin{verbatim}
   editor = {Doe, Jane},
   translator = {Doe, Jane},
   editortype = {comptrans},
\end{verbatim}

\item

\begin{verbatim}
   editor = {Doe, Jane},
   translator = {Doe, Jane},
   translatortype = {comptrans},
\end{verbatim}

\item

\begin{verbatim}
   editor = {Doe, Jane},
   translator = {Doe, Jane},
   editortype = {comptrans},
   translatortype = {comptrans},
\end{verbatim}

\end{enumerate}

The last option above raises the possibility that editor and
translator type fields may conflict. What if the editor type is
\textit{comptrans} and the translator type is something else, say,
\textit{extrans}? If the editors and translators are the same, but the
type fields differ, Windy City reads the editor type field and ignores
the translator type field.

Three more values for type fields allow you to assign editors and
translators to \bibfield{issuetitle}, \bibfield{maintitle}, and
\bibfield{series}. Here's an example from \textit{CMOS}
\ref{14.123}:

\begin{verbatim}
   @Book{allen2009,
     author = {Allen, Judith A.},
     title = {The Feminism of Charlotte Perkins Gilman},
     subtitle = {Sexualities, Histories, Progressivism},
     series = {Women in Culture and Society},
     editor = {Stimpson, Catharine R.},
     editortype = {series},
     address = {Chicago},
     publisher = {University of Chicago Press},
     year = {2009}
   }
\end{verbatim}

\begin{citebib}
\item \cite{allen2009}
\end{citebib}

\noindent If there were no \bibfield{editortype} with the value
\textit{series}, the style would have assigned \bibfield{editor} to
\bibfield{title}. The same goes for \bibfield{issuetitle} and
\bibfield{maintitle}: Assign editors and translators to them by
putting \textit{issuetitle} and \textit{maintitle} in the relevant
type fields.

With the help of strings from Table \ref{editors:table}, all editor and
translator types are available to \bibfield{issuetitle},
\bibfield{maintitle}, and \bibfield{series}. Commas function as
delimiters. To take the previous example, you could list Catharine
Stimpson as the editor and compiler of the series by putting the
values \textit{series,edcomp} or \textit{edcomp,series} in
\bibfield{editortype}.

Almost any entry that relies on cross-referencing can be written
without it. Doing so, however, requires some fields in your
bibliography database that are usually meant for the style's internal
use. These fields include \bibfield{booktitle} (a cross-referenced
\bibfield{title}) and \bibfield{bookbooktitle} (a double
cross-referenced \bibfield{title}---a \bibfield{title}
cross-referenced by a cross-referenced \bibfield{title}). To
accommodate entries that don't use cross-referencing, the style
accepts the values \textit{booktitle} and \textit{bookbooktitle} in
editor and translator type fields. An example of double
cross-referencing will set us up to use both:

\begin{verbatim}
   @InCollection{doe2018,
     options = {swapvol},
     author = {Doe, Jane},
     title = {A Poem},
     translator = {Smith, John},
     pages = {56–57},
     crossref = {jones2018}
   }
   @InBook{jones2018,
     editor = {Jones, David},
     title = {A Volume of Poems},
     volume = {2},
     year = {2018},
     crossref = {white2016}
   }
   @Collection{white2016,
     editor = {White, Amy},
     title = {A Collection of Poems},
     volumes = {4},
     address = {Chicago},
     publisher = {University of Chicago Press},
     year = {2016–18}
   }
\end{verbatim}

\begin{citebib}
\item \cite[56]{doe2018}
\end{citebib}

\noindent The following alternative dispenses with \bibfield{crossref}
but needs two editor type fields, plus two other fields that don't
usually appear in bibliography databases: \bibfield{bookvolume} (a
cross-referenced \bibfield{volume}) and \bibfield{bookyear} (a
cross-referenced \bibfield{year}).

\begin{verbatim}
   @InCollection{doe2018.alt,
     author = {Doe, Jane},
     title = {A Poem},
     translator = {Smith, John},
     pages = {56–57},
     booktitle = {A Volume of Poems},
     editor = {Jones, David},
     editortype = {booktitle},
     bookvolume = {2},
     year = {2018},
     bookbooktitle = {A Collection of Poems},
     editora = {White, Amy},
     editoratype = {bookbooktitle},
     volumes = {4},
     address = {Chicago},
     publisher = {University of Chicago Press},
     bookyear = {2016–18}
   }
\end{verbatim}

\begin{citebib}
\item \cite[56]{doe2018.alt}
\end{citebib}

In short, for a title's compilers, expanders, revisers, and updaters,
and for any title other than \bibfield{title}, you need to put the
correct value of the assignment in the editor or translator type field
that corresponds with the editor or translator name list
(\bibfield{editortype} for \bibfield{editor},
\bibfield{translatortype} for \bibfield{translator}, and so on).
Combined with Windy City's support for citing articles, chapters,
books, and other works within books, this scheme allows for several
sets of editors per work.

\subsection{Switching Places and Roles}
\label{editors:swap}

According to \textit{CMOS}, if a work has an editor and a translator,
their names should appear in citations in the order in which they
appear on the work's title page (see \textit{CMOS} \ref{14.104}). By
default, the style lists editors first. To reverse the order, the
style provides a suite of entry options that apply to the editors and
translators of different titles. This means that if a work has
multiple sets of editors and translators, you may swap positions of
any set without affecting the others.

For simplicity, let's focus on \opt{swaptrans}. This option swaps the
editors and translators of works other than an \bibfield{issuetitle},
\bibfield{maintitle}, or \bibfield{series}. Compare:

\begin{citebib}
\item \cite{doe2010a}
\end{citebib}
\begin{citebib}
\item \cite{doe2010b}
\end{citebib}

If a work has no author, but has editors, the style prints their names
in the author's position. The same happens if a work has no author or
editor but has translators. The following are examples from
\textit{CMOS} \ref{14.103}:

\begin{citebib}
\item \cite[100]{egan2014}
\item \cite[34]{silverstein1974}
\end{citebib}

What if a work has no author but has editors and translators? Since
Windy City gives priority to editors, it defaults to listing editors
in the author's position:

\begin{citebib}
\item \cite{smith2002a}
\end{citebib}

\noindent Use \opt{swaptrans} to reverse them:

\begin{citebib}
\item \cite{smith2002b}
\end{citebib}

Similarly, if a work's editors and translators are the same, the style
prints the editors' role first, as in \textit{edited and translated
by}. Reverse them with \opt{swaptrans}. From \textit{CMOS}
\ref{14.104}:

\begin{citebib}
\item \cite{menchu1999}
\end{citebib}

You may also swap roles by changing the value in the relevant
\bibfield{editortype} field (see Table \ref{editors:table} in section
\ref{editors:basics}). For compilers, expanders, revisers, and
updaters, you need to put a value in \bibfield{editortype} anyway. You
may as well pick a value that has the roles in the correct order.
Either way, if you pick one that begins with \textit{trans}
(\textit{transcomp}, \textit{transed}, \textit{transex},
\textit{transrev}, or \textit{transup}), Windy City assumes that the
translator's role goes first. Using \opt{swaptrans} would then put the
editor's role first.

As often happens, cross-referencing raises some complications. The
problem is that \opt{swaptrans} applies to the editors and translators
of a \bibfield{title}, but cross-referenced works have more than one
(a \bibfield{title}, a cross-referenced \bibfield{title}, and maybe
even a double cross-referenced \bibfield{title}). Three more entry
options allow you to pick among them so as to swap whichever set of
editors and translators you want. Here's a silly example to showcase
all three options:

\begin{verbatim}
   @InCollection{doe2017,
     author = {Doe, Jane},
     title = {An Essay},
     editor = {Smith, John},
     translator = {Smith, John},
     pages = {18–35},
     crossref = {jones2017}
   }
   @InBook{jones2017,
     title = {A Volume of Essays},
     editor = {Smith, John},
     translator = {Smith, John},
     volume = {1},
     crossref = {white2017}
   }
   @Collection{white2017,
     title = {A Collection of Essays},
     editor = {Smith, John},
     translator = {Smith, John},
     volumes = {3},
     address = {Chicago},
     publisher = {University of Chicago Press},
     year = {2017}
   }
\end{verbatim}

To swap the first set of editors and translators, use
\opt{swaptrans:title}:

\begin{citebib}
\item \cite{doe2017a}
\end{citebib}

To swap the second set of editors and translators, use
\opt{swaptrans:booktitle} (or \opt{swaptrans:book}):

\begin{citebib}
\item \cite{doe2017b}
\end{citebib}

To swap the third set of editors and translators, use
\opt{swaptrans:bookbooktitle} (or \opt{swaptrans:bookbook}):

\begin{citebib}
\item \cite{doe2017c}
\end{citebib}

To swap editors and translators of an \bibfield{issuetitle},
\bibfield{maintitle}, or \bibfield{series}, use
\opt{swaptrans:issuetitle}, \opt{swaptrans:maintitle}, or
\opt{swaptrans:series}, respectively. The first two also have short
forms: \opt{swaptrans:issue} and \opt{swaptrans:main}.

On rare occasions, you may want to swap positions of an author and an
editor or translator. From \textit{CMOS} \ref{14.104}:

\begin{citebib}
\item \cite{pound1953}
\end{citebib}

\noindent You can get this effect with the entry option
\opt{swapauth}, which works for \bibtype{book}, \bibtype{bookinbook},
\bibtype{collection}, \bibtype{inbook}, \bibtype{incollection},
\bibtype{mvbook}, and \bibtype{mvcollection} entry types. But beware:
Windy City doesn't look ahead to see if there's really an editor or
translator to take the author's place. If it doesn't find one, it
still prints the author's name after the title, leaving the author's
position empty. Also, if it finds both an editor and a translator, and
they're not the same person, it prints the editor's name in the
author's position---again, giving priority to editors. If you want the
translator's name in the author's position, use \opt{swapauth} with
the appropriate \opt{swaptrans} option.

For correct sorting in a bibliography, a work that uses \opt{swapauth}
needs a field like \bibfield{sortname} to sort it by the name of the
editor or translator whose name will occupy the author's position. It
would be nice if Windy City could do this for you, but at present no
feature of \biblatex seems to allow the kind of on-the-fly changes to
sorting that \opt{swapauth} requires. Below is the entry for the
previous example:

\begin{verbatim}
   @Book{pound1953,
     options = {swapauth},
     author = {Pound, Ezra},
     title = {Literary Essays},
     editor = {Eliot, T. S.},
     sortname = {Eliot, T. S.},
     address = {New York},
     publisher = {New Directions},
     year = {1953}
   }
\end{verbatim}

\section{Collections}
\label{collections}

Before you cite a collection or one of its volumes, you need to
consider how you want the citation to look (\textit{CMOS} gives you
options) and whether the collection should count as a single work or
as a composite. These issues have implications for how you structure
entries in your bibliography database and how you use citation
commands.

\subsection{Structuring Citations}
\label{collorder}

A work in a collection usually has a title and perhaps other
publication information that differs from the collection's. When
preparing your bibliography database, the most basic choice to make
about a work in a collection is which publication information has
priority, the collection's or the volume's. Consider an example from
\textit{CMOS} \ref{14.119}:

\begin{citebib}
\item \cite{armstrong2014}
\end{citebib}

\noindent The editor and title of the volume precede the editor and
title of the collection. In standard notes and bibliographies,
\textit{CMOS} gives you the option of reversing this order. (See
especially \textit{CMOS} \ref{14.119}, \ref{14.121}, and \ref{14.122},
and compare \ref{14.144} and \ref{15.41}.) Windy City does as well
with the entry or preamble option \opt{swapvol}.

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite{armstrong2014}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

In contexts where information for just one title appears (certain
short citations), the one with priority determines which one
identifies the work. By default, as you can see in the second note
below, the volume has priority:

\begin{citenobib}
\item \cite{armstrong2014}
\item \cite[45]{armstrong2014}
\end{citenobib}

\noindent Whereas with \opt{swapvol}:

\begin{citenobib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite{armstrong2014}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[45]{armstrong2014}
\end{citenobib}

Notice the volume number in the second note above, separated from the
page by a colon. When the collection has priority, the volume number
should appear in the citation. There are enough examples in
\textit{CMOS} to make that clear. But when the volume has priority,
the volume number is at best optional but probably incorrect. (It
could cause confusion, since the collection is what comes in volumes,
not the volumes themselves.) In any event, Windy City prints the
volume number only when the collection has priority, that is, when
\opt{swapvol} is \textit{true}.

If you want collections to have priority in every case, use the
\opt{swapvol} preamble option, which acts globally. More likely,
though, you'll want to give priority to the collection when citing
some works but not others. In those cases, use the \opt{swapvol} entry
option. A good candidate for the latter is this example from
\textit{CMOS} \ref{14.118}:

\begin{citebib}
\item \cite*{james1963.5}
\end{citebib}

\noindent The volume's title (\textit{1883--1884}) merely indicates a
portion of the collection, somewhat like the volume of an encyclopedia
with the title \textit{D–F}. There's nothing wrong with putting it
first. But putting it second seems more intuitive.

For other works, \opt{swapvol} may seem like a poor choice, even if
the output is formally correct:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite{barrows1959}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

\noindent Having the editor's name first and the author's name after
the volume's title looks odd. But it's not wrong. The volume's author
didn't write every volume of the collection. In giving priority to the
collection, then, the first position, where an author's name normally
goes, should go to the collection's editor, not to the volume's
author. By contrast, the default output looks more familiar:

\begin{citebib}
\item \cite{barrows1959}
\end{citebib}

One drawback of \opt{swapvol} is that some works changed by it won't
sort correctly in a bibliography without help. The affected works
include those without listed authors and those in which the volume has
an author but the collection as a whole doesn't---and possibly others.
You can fix them by adding a \bibfield{sortname} field to their
bibliography database entries.

This drawback shouldn't affect \bibfield{bookinbook},
\bibfield{inbook}, \bibfield{incollection}, or \bibfield{letter}
entries when they're cross-referenced to works that are changed by
\opt{swapvol}. They should have their own authors or titles that Windy
City can use for proper sorting. It seems that \textit{CMOS} gives
exactly one such example in \ref{14.120}:

\begin{citebib}
\item \cite[169--71]{king2014}
\item \cite[170]{king2014}
\end{citebib}

\noindent Here's the output with the preamble or entry option
\opt{swapvol}:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[169--71]{king2014}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[170]{king2014}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

In neither case does Windy City print the volume number before the
page reference. That's because, with or without \opt{swapvol}, the
citation is directly to the work's title, not to the collection. The
same goes for articles, chapters, books, and other works of this type.
Further, consistent with \textit{CMOS} \ref{14.108} and \ref{15.42},
Windy City cross-references previously cited volumes.

% Due to 'mincrossrefs=2', jones2018 would be added automatically to
% the bibliography at the end of the document because it's referenced
% twice below. However, it wouldn't appear in the refsegment without
% using \nocite.

\begin{citebib}
\item \cite[56]{doe2018}
\item \cite[128]{adams2018}
\nocite{jones2018}
\end{citebib}

\noindent Now with \opt{swapvol}:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[56]{doe2018}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[128]{adams2018}
\AtNextBibliography{\toggletrue{swapvol}}
\nocite{jones2018}
\end{citebib}

How does Windy City determine which entries in a bibliography database
work with \opt{swapvol}? To keep things simple, let's focus on
individual volumes of a collection, rather than works collected in
them, like articles and chapters. Below are entries for an earlier
example:

\begin{verbatim}
   @InBook{armstrong2014,
     editor = {Armstrong, Tenisha},
     title = {To Save the Soul of America, January 1961–August
              1962},
     shorttitle = {To Save the Soul of America},
     volume = {7},
     year = {2014},
     crossref = {carson1992}
   }
   @Collection{carson1992,
     editor = {Carson, Clayborne},
     title = {The Papers of Martin Luther King, Jr.},
     volumes = {14},
     address = {Berkeley},
     publisher = {University of California Press},
     year = {1992–}
   }
\end{verbatim}

A \bibtype{bookinbook} or \bibtype{inbook} entry for a volume works
with \opt{swapvol} if it has a \bibfield{title}, a \bibfield{volume},
and another \bibfield{title} inherited from a cross-referenced entry,
and if it lacks certain fields that it shouldn't have, such as a
\bibfield{maintitle} field or a \bibfield{volume} field inherited from
the cross-referenced entry. You can find the exact details in
\file{windycity.bbx}. Just remember that entries like these should
always be cross-referenced to a \bibtype{collection} or to one of its
aliases. Since Windy City treats them the same, it makes no difference
whether you designate entries for volumes as \bibtype{bookinbook} or
\bibtype{inbook}.

With one exception, you can get the same output with a \bibtype{book},
\bibtype{collection}, \bibtype{mvbook}, or \bibtype{mvcollection}
entry. Here's a counterpart to the previous example using
\bibtype{collection}:

\begin{verbatim}
   @Collection{carson2014,
     editor = {Armstrong, Tenisha},
     title = {To Save the Soul of America, January 1961–August
              1962},
     volume = {7},
     maintitle = {The Papers of Martin Luther King, Jr.},
     editora = {Carson, Clayborne},
     editoratype = {maintitle},
     volumes = {14},
     address = {Berkeley},
     publisher = {University of California Press},
     year = {2014}
   }
\end{verbatim}

These entry types work with \opt{swapvol} if they have
\bibfield{volume} and \bibfield{maintitle} fields, among other
conditions. You may prefer them over \bibfield{bookinbook} or
\bibfield{inbook} entries if you only intend to cite one volume of the
collection and have no need to cite the collection as a whole. You
risk trouble, though, if the volumes of the collection have different
publication dates, as they do for \textit{The Papers of Martin Luther
King, Jr}. If the publication information for this volume goes last,
the bibliography and long citation should list the publication date as
\textit{2014}. If the publication information for the collection goes
last, that date is \textit{1992–}. A \bibtype{book} or
\bibtype{collection} entry, however, has just one field for a
publication date, so using \opt{swapvol} on \bibfield{carson2014}
would print \textit{2014}, not \textit{1992–}. Otherwise, the entry
types are interchangeable. You can find examples of both approaches in
\file{windycity.bib}.

Certain entries cross-referenced to entries that work with
\opt{swapvol} also work with it. Those entry types are limited to
\bibtype{bookinbook}, \bibtype{inbook}, \bibtype{incollection}, or
\bibtype{letter}. For the letter cited above:

\begin{verbatim}
   @Letter{king2014,
     author = {King, Jr., Martin Luther},
     title = {Unpublished letter to the editor of the
              \emph{Afro-American} (Washington, DC)},
     crossref = {armstrong2014}
   }
\end{verbatim}

\noindent You may cross-reference this entry to
\bibfield{armstrong2014} or \bibfield{carson2014}. The only difference
is that, with \opt{swapvol}, cross-referencing to
\bibfield{carson2014} once more gives the wrong publication date for
the collection. With many collections, this wouldn't be an issue.
Convenience, then, is perhaps the only consideration in choosing how
you do it. If you plan to cite more than one volume of a collection,
and different works in those volumes or the collection as a whole,
cross-referencing to \bibtype{bookinbook} or \bibtype{inbook} entries
is probably simpler. The other way is simpler if you plan to cite just
one work in one volume.

As mentioned in \textit{CMOS} \ref{15.41}, reference lists should give
priority to the volume, not to the collection. Nevertheless, Windy
City doesn't prevent you from using \opt{swapvol} with \opt{reflist}.
(If you do use them together, it's best to choose the \opt{swapvol}
entry option, which does a better job at formatting and sorting works
in reference lists than the \opt{swapvol} preamble option.) Either
way, remember that when a volume and a collection have different
publication dates, a reference list entry prints both dates, which in
turn requires you to use the \bibtype{bookinbook} or \bibtype{inbook}
approach.

\begin{refonly}
\nocite{armstrong2014}
\end{refonly}

A final issue concerns whether you want long citations to give a
work's total number of volumes. Whereas entries in a bibliography
almost always give that number (the exceptions are those that work
with \opt{swapvol}), doing so in notes is optional (per \textit{CMOS}
\ref{14.118}).

Here's what Windy City does: Apart from entries that work with
\opt{swapvol}, it prints the \bibfield{volumes} field in long
citations only if the \bibfield{postnote} field is empty. That's not a
requirement of \textit{CMOS}. But there are several reasons for
preferring this approach. If the \bibfield{postnote} is empty,
printing the total preserves the correspondence between the long
citation and its entry in the bibliography. This prevents the
appearance that something has gone wrong when an element in one is
missing from the other. If the \bibfield{postnote} isn't empty, it
likely contains information that, as with page references, should also
include a volume number (see section \ref{multivolume}). Including a
volume number makes it less important, arguably, to include the total
number of volumes. The main benefit, anyway, is that Windy City's
approach is consistent with citations of \textit{The Lisle Letters} in
\textit{CMOS} \ref{14.117} and \ref{14.118}. No simpler rule would be.

Confused? All you need to know is that, barring exceptions for
\opt{swapvol}, if you want to print a work's total number of volumes
without regard to the \bibfield{postnote}, use the entry option
\opt{listvols}. Windy City uses it to match some examples in
\textit{CMOS}, such as in \ref{14.59}:

\begin{citenobib}
\item \cite[1:126]{shurtleff1853}
\end{citenobib}

\subsection{Collections as Single Works}
\label{multivolume}

Although its discussion is a bit obscure, \textit{CMOS} treats some
multivolume collections as single works---but only, it seems, if every
volume of the collection has the same title and publication date. To
illustrate the distinction between a collection that counts as a
single work and one that doesn't, \textit{CMOS} gives the following
examples in \ref{14.118}:

\begin{citenobib}
\item \cite[4:243]{byrne1981}
\item \cite*[32--33]{james1963.5}
\item \cite[4:245]{byrne1981}
\item \cite*[34]{james1963.5}
\end{citenobib}

In citations of \textit{The Lisle Letters}, volume numbers and pages
are separated by a colon. With \textit{The Complete Tales of Henry
James}, only the second citation follows this pattern. In the first,
the volume number appears earlier, after the editor's name. Why?
Apparently, \textit{The Lisle Letters} is a single, multivolume work
because every volume has the same title and publication date. Not so
\textit{The Complete Tales of Henry James}. Its volumes have different
titles and publication dates.

To get the right output, your bibliography database and citations need
to reflect this distinction. Think of it this way: If a multivolume
collection meets the criteria of a single work (all volumes have the
same title and publication date), your bibliography database should
have just one entry to which all citations of the collection refer,
regardless of whether they cite particular volumes or the collection
as a whole. Here's the entry for \textit{The Lisle Letters}:

\begin{verbatim}
   @Collection{byrne1981,
     editor = {Byrne, Muriel St. Clare},
     title = {The Lisle Letters},
     volumes = {6},
     address = {Chicago},
     publisher = {University of Chicago Press},
     year = {1981}
   }
\end{verbatim}

To cite a particular volume of the collection, include the volume
number in the citation's \bibfield{postnote}. For citations of pages,
remember the format from \textit{CMOS} \ref{14.118}: Volume numbers
and pages are separated with a colon. Here's the source for the first
citation of \textit{The Lisle Letters}:

\begin{verbatim}
   \cite[4:243]{byrne1981}
\end{verbatim}

\noindent To cite a volume by itself, without a page reference, or to
cite chapters, sections, and other parts of the work, remember to use
the appropriate abbreviations (for some examples, see \textit{CMOS}
\ref{14.120}, 15.23, and \ref{15.41}):

\begin{verbatim}
   \cite[vol. 3, chap. 9]{byrne1981}
\end{verbatim}

What if the \bibfield{postnote} is empty? Windy City assumes that you
mean to cite the collection as a whole. As such, the first, long
citation of the work prints the collection's total number of volumes.
Subsequent entries indicate the collection in whatever short form
corresponds to the preamble options. The following shows the default
output for two such citations of the collection:

\begin{citenobib}
\item \cite{byrne1981}
\item \cite{byrne1981}
\end{citenobib}

For collections like \textit{The Complete Tales of Henry James}, which
don't count as single works, every volume needs to have its own entry
in the bibliography database. Here's the entry for the volume cited in
\textit{CMOS} \ref{14.118}:

\begin{verbatim}
   @Collection{james1963.5,
     options = {swapvol},
     author = {James, Henry},
     title = {1883–1884},
     volume = {5},
     maintitle = {The Complete Tales of Henry James},
     shortmaintitle = {Complete Tales of Henry James},
     editor = {Edel, Leon},
     editortype = {maintitle},
     volumes = {12},
     address = {London},
     publisher = {Rupert Hart-Davis},
     year = {1963}
   }
\end{verbatim}

Since the volume number is part of the entry and needs to print in
different places depending on the context, don't include it in the
\bibfield{postnote}. Let Windy City handle it. Below is the source for
the first and second citations of \textit{The Complete Tales of Henry
James}:

\begin{verbatim}
   \item \cite*[32--33]{james1963.5}
     ...
   \item \cite*[34]{james1963.5}
\end{verbatim}

\noindent The first citation prints the volume number after the
editor's name, long before the \bibfield{postnote}. The second prints
it just before the \bibfield{postnote}, separated from the page by a
colon:

\begin{citenobib}
\item[2.] \cite*[32--33]{james1963.5}
\item[\ldots]
\item[4.] \cite*[34]{james1963.5}
\end{citenobib}

Neither type of collection uses cross-referencing in the bibliography
database. For \textit{The Lisle Letters}, cross-referencing would
introduce needless complexity. A single work should have a single
entry, not multiple, cross-referenced entries. For \textit{The
Complete Tales of Henry James}, cross-referencing would result in
errors because, with different titles and publication dates, not all
publication data for the collection is true of each volume. To cite
the collection as a whole, as in \textit{CMOS} \ref{14.117}, add a
separate entry:

\begin{verbatim}
   @Collection{james1962,
     author = {James, Henry},
     title = {The Complete Tales of Henry James},
     shorttitle = {Complete Tales of Henry James},
     editor = {Edel, Leon},
     volumes = {12},
     address = {London},
     publisher = {Rupert Hart-Davis},
     year = {1962–64}
   }
\end{verbatim}

\subsection{Works \textit{in} Volumes or \textit{as} Volumes}

Many examples so far show the use of the \bibfield{volume} field. What
they don't quite show is that, as with editors and translators, Windy
City associates \bibfield{volume} with an entry's lowest level title.
Usually, this doesn't require any thought when preparing a
bibliography database. The \bibfield{volume} field goes where you'd
expect it to. But if you're not careful, you could end up with errors,
especially when citing books in collections.

\begin{verbatim}
   @InBook{spinoza1900.1.1,
     title = {A Theological-Political Treatise},
     crossref = {spinoza1900.1}
   }
   @Collection{spinoza1900.1,
     author = {Spinoza, Benedict de},
     title = {The Chief Works of Benedict de Spinoza},
     edition = {revised},
     translator = {Elwes, R. H. M.},
     volume = {1},
     address = {London},
     publisher = {George Bell {and} Sons},
     year = {1900}
   }
\end{verbatim}

In the entries above, Windy City associates \bibfield{volume} with
\textit{The Chief Works of Benedict de Spinoza}, not with \textit{A
Theological-Political Treatise}. The latter, it assumes, isn't volume
one of the collection but a work contained \textit{in} volume one,
presumably with other works. Windy City formats the citation
accordingly:

\begin{citebib}
\item \cite{spinoza1900.1.1}
\end{citebib}

\noindent If \bibfield{volume} were within the scope of
\bibfield{spinoza1900.1.1}, Windy City would assume that \textit{A
Theological-Political Treatise} is volume one of \textit{The Chief
Works of Benedict de Spinoza}. The same error would occur if you put
all the data for the citation into a \bibfield{collection} entry.
Windy City would associate \bibfield{volume} with \bibfield{title},
not with \bibfield{maintitle}. The upshot is that correctly citing a
work like this requires cross-referencing an \bibtype{inbook} or
\bibtype{bookinbook} entry to a \bibtype{collection}, \bibtype{book},
\bibtype{mvbook}, or \bibtype{mvcollection} entry. (Again, the
alternatives give the same output.) Only then would Windy City
associate \bibfield{volume} with the right \bibfield{title}.

\section{Examples from \emph{CMOS} Chap. 14, ``Notes and
Bibliography''}
\label{notes}

Examples in this section reproduce those in \textit{CMOS} chapter 14.
To help with cross-checking, subsection numbers and headings are from
\textit{CMOS}.

\titleformat{\subsubsection}{\normalsize\it}{\arabic{subsection}.\arabic{subsubsection}}{2ex}{}
\subsection{Basic Format, with Examples and Variations}
\setcounter{subsection}{14}

\setcounter{subsubsection}{22}
\subsubsection{Notes and bibliography—examples and variations}
% 14.23 Notes and bibliography—examples and variations
\label{14.23}

\begin{citebib}
\item \cite[87-88]{strayed2012}
\item \cite[261, 265]{strayed2012}
\item \cite[32]{daum2015}
\item \cite[134--35]{daum2015}
\item \cite[188]{grazer2015}
\item \cite[190]{grazer2015}
\item \cite[242--55]{garcia1988}
\item \cite[33]{garcia1988}
\item \cite[310]{gould1984a}
\item \cite[309]{gould1984a}
\item \cite[484--85]{bagley2015}
\item \cite[501]{bagley2015}
\item \cite[311]{liu2015}
\item \cite[312]{liu2015}
\end{citebib}

\setcounter{subsection}{1}
\subsection{Notes}
\setcounter{subsection}{14}

\setcounter{subsubsection}{29}
\subsubsection{Basic structure of the short form}
% 14.30: Basic structure of the short form
\label{14.30}

\begin{citebib}
\item \cite[24--25]{morley1995}
\item \cite{schwartz1992}
\item \cite{kaiser1964}
\item \cite[43]{morley1995}
\item \cite[138]{schwartz1992}
\item \cite[189--90]{kaiser1964}
\end{citebib}

\setcounter{subsubsection}{33}
\subsubsection{Shortened citations versus ``ibid''}
% 14.34:
\label{14.34}

On short citations and the \opt{short} and \opt{ibid} preamble
options, see sections \ref{short} and \ref{preamble}.

\begin{citenobib}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[3]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[24--26]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[401-2]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[433]{morrison2004b}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[37--38]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[403]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[152]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[201-2]{diaz2007}
\AtNextMultiCite{\toggletrue{short}}
\item \cites[240]{morrison2004b}[32]{morrison2004a}
\AtNextCitekey{\toggletrue{short}} \item \cite[33]{morrison2004a}
\end{citenobib}

\noindent With options \opt{short} and \opt{ibid}:

\begin{citenobib}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[3]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}\toggletrue{ibidpage}}
\item \cite[18]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[24--26]{morrison2004a}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[401-2]{morrison2004b}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[433]{morrison2004b}
\AtNextCitekey{\toggletrue{short}\toggletrue{shortfirst}}
\item \cite[37--38]{diaz2007}
\AtNextCitekey{\toggletrue{short}}
\item \cite[403]{morrison2004b}
\AtNextCitekey{\toggletrue{short}}
\item \cite[152]{diaz2007}
\AtNextCitekey{\toggletrue{short}\toggletrue{ibid}}
\item \cite[201-2]{diaz2007}
\AtNextMultiCite{\toggletrue{short}\toggletrue{shortfirst}}
\item \cites[240]{morrison2004b}[32]{morrison2004a}
\AtNextCitekey{\toggletrue{short}}
\item \cite[33]{morrison2004a}
\end{citenobib}

\setcounter{subsubsection}{53}
\subsubsection{Source notes for previously published material}
% 14.54 Source notes for previously published material

\begin{citebib}
\item \cite[Reprinted with permission from][15–64]{shapin1996}
\item \cite*[Originally published as][22–69, © 1992 by The University of
Chicago. All rights reserved. Reprinted by permission]{manet1992}
\end{citebib}

\setcounter{subsubsection}{56}
\subsubsection{Several citations in one note}
% 14.57 Several citations in one note
\label{14.57}

See section \ref{idemcite} for information on how to reproduce this
example.

\begin{quote} Only when we gather the work of several
scholars---Walter Sutton's explications of some of Whitman's shorter
poems; Paul Fussell's careful study of structure in ``Cradle''; S. K.
Coffman's close readings of ``Crossing Brooklyn Ferry'' and ``Passage
to India''; and the attempts of Thomas I. Rountree and John Lovell,
dealing with ``Song of Myself'' and ``Passage to India,''
respectively, to elucidate the strategy in ``indirection''---do we
begin to get a sense of both the extent and the specificity of
Whitman's forms.\footnotemark[1] \end{quote}

\begin{citenobib}
\item \idemcites{sutton1959,fussell1962,coffman1954,coffman1955,rountree1958}[and][]{lovell1960}
\end{citenobib}

\setcounter{subsubsection}{58}
\subsubsection{Abbreviations for frequently cited works}
% 14.59 Abbreviations for frequently cited works
\label{14.59}

For information on shorthands, see section \ref{stdfields}.

\begin{citebib}
% There's no way to suppress these fields in the bibliography:
%\AtNextCitekey{\clearfield{origtitle}%
%  \clearlist{origlocation}%
%  \clearlist{origpublisher}%
%  \clearfield{origyear}}
%\item \cite[368]{furet1999}
\item \cite[1:126]{shurtleff1853}
\item \cite[2:330]{shurtleff1853}
\end{citebib}

\setcounter{subsubsection}{67}
\subsubsection{The 3-em dash for one repeated name}
% 14.68 The 3-em dash for one repeated name

A 3-em dash replaces names in the author's position of a citation in
consecutive citations on the same page. Thus, whether the example
below exactly reproduces that in \textit{CMOS} 14.68 depends in part
on whether a page break falls somewhere within the list.

\begin{bibonly}
\nocite{judt1996,judt2008,judt1989,squire1983,squire1987}
\end{bibonly}

\setcounter{subsection}{2}
\subsection{Author's Name}
\setcounter{subsection}{14}

\setcounter{subsubsection}{74}
\subsubsection{One author}
% 14.75 One author

\begin{citebib}
\item \cite[33]{shields2013}
\item \cite[677]{chun2015}
\item \cite[5]{mccune2014}
\item \cite[100--101]{shields2013}
\item \cite[681]{chun2015}
\item \cite[105--11]{mccune2014}
\end{citebib}

\subsubsection{Two or more authors (or editors)}
% 14.76 Two or more authors (or editors)
\label{14.76}

\begin{citebib}
\item \cite[xvi]{sorrells2015}
\item \cite[20--21]{levitt2005}
\item \cite[422]{umbers2015}
\item \cite[xx-xxi]{sorrells2015}
\item \cite[158]{gmuca2015}
\item \cite[160]{gmuca2015}
\end{citebib}

\subsubsection{Two or more authors (or editors) with same family name}
% 14.77 Two or more authors (or editors) with same family name

\begin{citebib}
\item \cite[14]{kendris2010}
\item \cite[27--28]{kendris2010}
\end{citebib}

\subsubsection{Author's name in title}
% 14.78 Author's name in title
\label{14.78}

On the use of starred citation commands, see section \ref{std.cmd}.

\begin{citebib}
\item \cite*[233]{franklin1868}
\item \cite*[234]{franklin1868}
\end{citebib}

\subsubsection{No listed author (anonymous works)}
% 14.79 No listed author (anonymous works)
\label{14.79}

See section \ref{stdfields} on the use of the \bibfield{authortype}
field for anonymous works.

\begin{citebib}
\item \cite{anon1610}
\item \cite{anon1547}
\item \cite{horsley1796}
\item \cite{hawkes1834}
\end{citebib}

\subsubsection{Pseudonyms}
% 14.80 Pseudonyms

\begin{citebib}
\item \cite{akmuckraker2008}
\item \cite{carre1982}
\item \cite{stendhal1925}
\end{citebib}

\subsubsection{Cross-references for pseudonyms}
% 14.81 Cross-references for pseudonyms
\label{14.81}

For information on how to add entries that cross-reference others, see
section \ref{entrytypes}. For examples of automatic cross-referencing
in a bibliography, see \ref{14.108} and \ref{15.42}.

\begin{bibonly}
\nocite{ashe,creasey1976,creasey1978,creasey1966,morton,york}
\end{bibonly}

\subsubsection{Alternative real names}
% 14.82 Alternative real names
\label{14.82}

For information on how to get the last entry below, see section
\ref{entrytypes}.

\begin{bibonly}
\nocite{doniger2000,oflaherty}
\end{bibonly}

\subsubsection{Authors known by a given name}
% 14.83 Authors known by a given name

\begin{citebib}
\item \cite{elizabeth2000}
\end{citebib}

\subsubsection{Organization as author}
% 14.84 Organization as author
\label{14.84}

If an organization is the work's author, remember to add an extra pair
of brackets around the name of the organization in your bibliography
database.

\begin{citebib}
\item \cite{iso1997}
\AtNextCitekey{\clearfield{shorthand}}
\item \cite{chicago2017}
\end{citebib}

\setcounter{subsection}{3}
\subsection{Title of Work}
\setcounter{subsection}{14}

\setcounter{subsubsection}{88}
\subsubsection{Subtitles in cited works and the use of the colon}
% 14.89 Subtitles in cited works and the use of the colon

\begin{citebib}
\item \cite{gladwell2013}
\end{citebib}

\subsubsection{Two subtitles in a cited work}
% 14.90 Two subtitles in a cited work

\begin{citebib}
\item \cite{sereny1999}
\end{citebib}

\setcounter{subsubsection}{91}
\subsubsection{``And other stories'' and such}
% 14.92 ``And other stories'' and such

\begin{citebib}
\item \cite[104]{maclean1976}
\end{citebib}

\subsubsection{Dates in titles of cited works}
% 14.93 Dates in titles of cited works

\begin{citebib}
\item \cite{beiser2014}
\end{citebib}

\subsubsection{Quoted titles and other terms within cited titles of works}
% 14.94 Quoted titles and other terms within cited titles of works

\begin{citebib}
\item \cite{levitt2014}
\item \cite{mchugh1980}
\end{citebib}

\subsubsection{Italicized titles and other terms within cited titles of works}
% 14.95 Italicized titles and other terms within cited titles of works

\begin{citebib}
\item \cite{vanwagenen1973}
\end{citebib}

\subsubsection{Question marks or exclamation points in titles of cited works}
% 14.96 Question marks or exclamation points in titles of cited works

\begin{citebib}
\item \cite[63]{berra2002}
\item \cite[183]{oram2007}
\item \cite[778]{tessler2014}
\item \cite[336]{batson1990}
\item \cite[55--56]{berra2002}
\item \cite[184]{oram2007}
\item \cite[780]{tessler2014}
\item \cite[337]{batson1990}
\end{citebib}

\setcounter{subsubsection}{98}
\subsubsection{Translated titles of cited works}
% 14.99 Translated titles of cited works
\label{14.99}

\begin{citebib}
\item \cite{wereszycki1977}; includes a summary in German.
\item \cite[272]{kern1938}
\item \cite{pirumova1977b}
%\AtNextCitekey{\clearfield{shorthand}}
\item \cite{furet1999}
\end{citebib}

\setcounter{subsection}{4}
\subsection{Books}
\setcounter{subsection}{14}

\setcounter{subsubsection}{100}
\subsubsection{Form of author's name and title of book in source citations}
% 14.101 Form of author’s name and title of book in source citations

\begin{citebib}
\item \cite[79--80]{gawande2014}
\item \cite[191]{gawande2014}
\end{citebib}

\setcounter{subsubsection}{102}
\subsubsection{Editor in place of author}
% 14.103 Editor in place of author
\label{14.103}

\begin{citebib}
\item \cite[100]{egan2014}
\item \cite[33]{schechter2011}
\item \cite[34]{silverstein1974}
\item \cite[301--2]{egan2014}
\item \cite[54--56]{schechter2011}
\item \cite[38]{silverstein1974}
\end{citebib}

\subsubsection{Editor or translator in addition to author}
% 14.104 Editor or translator in addition to author
\label{14.104}

On how to make an author and editor swap places, see section
\ref{editors:swap}.

\begin{citebib}
\item \cite{bonnefoy1995}
\item \cite{menchu1999}
\item \cite{adorno1999}
\item \cite{pound1953}
\end{citebib}

\subsubsection{Other contributors listed on the title page}
% 14.105 Other contributors listed on the title page
\label{14.105}

\begin{citebib}
\item \cite{chaucer1966}
\item \cite{cullen1961}
\item \cite{hayek1994}
\item \cite{prather1998}
\item \cite{williams1990}
\end{citebib}

\subsubsection{Chapter in a single-author book}
% 14.106 Chapter in a single-author book

\begin{citebib}
\item \cite[211]{brower2015.8}
\item \cite{samples2006.7}
\item \cite[30-31]{samples2006.7}
\end{citebib}

\subsubsection{Contribution to a multiauthor book}
% 14.107 Contribution to a multiauthor book

\begin{citebib}
\item \cite[325]{miller2014}
\item \cite{ellet1968}
\end{citebib}

\subsubsection{Several contributions to the same multiauthor book}
% 14.108 Several contributions to the same multiauthor book
\label{14.108}

% Due to 'mincrossrefs=2', angle1968 and zukowsky1987 would be added
% automatically to the bibliography at the end of the document because
% each is referenced twice below. However, they wouldn't appear in the
% refsegment without using \nocite.

% Unlike article entries, incollection entries don't automatically
% print page ranges. That seems right, though CMOS isn't entirely
% clear on this point. See note for 'cite:pages' in windycity.cbx.

\begin{citebib}
\item \cite[84--87]{keating1968}
\item \cite[362--70]{lippincott1968}
\item \cite[107--19]{draper1987}
\item \cite[189--207]{harrington1987}
\nocite{angle1968,zukowsky1987}
\end{citebib}

\subsubsection{Book-length work within a book}
% 14.109 Book-length work within a book
\label{14.109}

\begin{citebib}
\item \cite{bernard1990a}
\item \cite{updike1995a}
\end{citebib}

\subsubsection{Introductions, prefaces, afterwords, and the like}
% 14.110 Introductions, prefaces, afterwords, and the like

% The bibliography database entry for Toni Morrison's foreword to
% \textit{Song of Solomon} doesn't list a page range. Unlike the
% second example, which shows an introduction by authors different
% than that of the main text, it doesn't need to.

\begin{citebib}
\item \cite{morrison2004b.f}
\item \cite{mansfield2000}
\end{citebib}

\subsubsection{Letters in published collections}
% 14.111 Letters in published collections

\begin{citebib}
\item \cite[133--34]{adams1867}
\item \cite{jackson1676}
\end{citebib}

\setcounter{subsubsection}{112}
\subsubsection{Editions other than the first}
% 14.113 Editions other than the first

\begin{citebib}
\item \cite[401--2]{einsohn2011}
\item \cite[101]{boudett2013}
\item \cite{strunk2000}
\end{citebib}

\subsubsection{Reprint editions and modern editions}
% 14.114 Reprint editions and modern editions
\label{14.114}

% You can have at most one \bibfield{origdate} per entry. So, if you
% cite a work in a collection, say, an article or book in an
% anthology, the style assumes that \bibfield{origdate} is for the
% collection, not for the individual work.

\begin{citebib}
\item \cite[152--53]{barzun1994}
\item \cite{bahadur2014}
% CMOS prints the original date in the wrong place:
%\item \cite{emerson1985}
\item \cite{schweitzer1966}
\end{citebib}

\subsubsection{Microform editions}
% 14.115 Microform editions

Farwell's citation fails to match \textit{CMOS} because the
\bibfield{howpublished} field, which seems like the best choice to
contain \textit{microfiche}, follows the \bibfield{postnote} field,
which contains \textit{p. 67, 3C12}. This order is necessary
elsewhere, such as in \textit{CMOS} \ref{14.163}.

\begin{citebib}
\item \cite[p. 67, 3C12]{farwell1997}
\item \cite{tauber1958}
\end{citebib}

\noindent Citing Farwell with the preamble or entry option
\opt{swapvol}:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[p. 67, 3C12]{farwell1997}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

\setcounter{subsubsection}{116}
\subsubsection{Citing a multivolume work as a whole}
% 14.117 Citing a multivolume work as a whole
\label{14.117}

\begin{citebib}
\item \cite{aristotle1983}
\item \cite{byrne1981}
\item \cite{james1962}
\end{citebib}

\subsubsection{Citing a particular volume in a note}
% 14.118 Citing a particular volume in a note
\label{14.118}

For a discussion of how to handle these types of works, see section
\ref{multivolume}.

\begin{citebib}
\item \cite[4:243]{byrne1981}
\item \cite*[32--33]{james1963.5}
\item \cite[4:245]{byrne1981}
\item \cite*[34]{james1963.5}
\end{citebib}

\subsubsection{Citing a particular volume in a bibliography}
% 14.119 Citing a particular volume in a bibliography
\label{14.119}

\begin{citebib}
\item \cite{armstrong2014}
\end{citebib}

\noindent With preamble or entry option \opt{swapvol}:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite{armstrong2014}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

\subsubsection{Chapters and other parts of individual volumes}
% 14.120 Chapters and other parts of individual volumes
\label{14.120}

There are some peculiarities with the first example. In the printed
edition, but not online, \textit{CMOS} errs in having \textit{.ed}
rather than \textit{edited by} in the bibliography and neglects to
invert the author's name. More worrisome are the striking differences
between the note and bibliography. They may represent alternative ways
of formatting the data, as other examples do. But the note seems
inconsistent with \textit{CMOS} \ref{14.118}, and so doesn't make much
sense as an alternative. Windy City ignores it and in both cases
follows the example of the bibliography.

\begin{citebib}
\item \cite[180]{chen2010.3}
\item \cite[169--71]{king2014}
\end{citebib}

\noindent Citing King with the preamble or entry option
\opt{swapvol}:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[169--71]{king2014}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

\subsubsection{One volume in two or more books}
% 14.121 One volume in two or more books
\label{14.121}

\begin{citebib}
\item \cite[351]{lach1977}
\item \cite{harley1994}
\end{citebib}

\noindent With preamble or entry option \opt{swapvol}:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite[351]{lach1977}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite{harley1994}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

\subsubsection{Authors and editors of multivolume works}
% 14.122 Authors and editors of multivolume works
\label{14.122}

For issues surrounding the first example below, see section
\ref{collorder}.

\begin{citebib}
\item \cite{barrows1959}
\item \cite{donne1995}
\end{citebib}

\noindent With preamble or entry option \opt{swapvol}:

% As explained in \ref{collorder}, works like barrows1959 sort
% correctly in the default format but incorrectly with the option
% 'swapvol'. The point of '\newrefcontext' below is to work around
% this problem.

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite{barrows1959}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite*{donne1995}
\newrefcontext[sorting=reverse]
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}
\newrefcontext[sorting=nty]

\subsubsection{Series titles, numbers, and editors}
% 14.123 Series titles, numbers, and editors
\label{14.123}

\begin{citebib}
\item \cite{lei2014}
\item \cite{mazrim2011}
\item \cite{wauchope1950}
\item \cite{allen2009}
\end{citebib}

\subsubsection{Series or multivolume work?}
% 14.124 Series or multivolume work?

In the second example, \textit{vol. 6} refers to the book's series,
Readings in Western Civilization. Usually, the number of a series
isn't recorded as a volume, so Windy City doesn't use the
\bibfield{volume} field for them. Instead, it uses the
\bibfield{number} field, which it prints with no preceding
abbreviation. Add one to the field as necessary. The \bibfield{number}
field for the second example below contains \textit{vol. 6}.

\begin{citebib}
\item \cite{boyer1986}
\item \cite{cochrane1987}
\end{citebib}

\setcounter{subsubsection}{125}
\subsubsection{``Old series'' and ``new series''}
% 14.126 ``Old series'' and ``new series''
\label{14.126}

\begin{citebib}
\item \cite{boxer1953}
\item \cite{palmatary1950}
\end{citebib}

\subsubsection{Place, publisher, and date}
% 14.127 Place, publisher, and date

\begin{citebib}
\item \cite{woolf1927}
\end{citebib}

\subsubsection{Place and date only, for books published before 1900}
% 14.128 Place and date only, for books published before 1900

\begin{citebib}
\item \cite{goldsmith1766}
\item \cite{cervantes1605}
\end{citebib}

\setcounter{subsubsection}{131}
\subsubsection{No place of publication}
% 14.132 No place of publication
\label{14.132}

To insert \textit{n.p.} (for \textit{no place}), you need to use the
entry option \opt{noplace}. See section \ref{entry}.

\begin{citenobib}
%\begin{itemize}[before=\small,itemindent=0ex]
\item[] \cite{windsor1910}
\item[] \cite{vliet1890}
\end{citenobib}
%\end{itemize}

\setcounter{subsubsection}{136}
\subsubsection{Self-published or privately published books}
% 14.137 Self-published or privately published books

\begin{citebib}
\item \cite{karavaev2015}
\item \cite{shumaker2014}
\end{citebib}

\setcounter{subsubsection}{139}
\subsubsection{Copublication}
% 14.140 Copublication

\begin{citebib}
\item \cite{strauss1962}
\end{citebib}

\subsubsection{Distributed books}
% 14.141 Distributed books

\begin{citebib}
\item \cite{willke2007}
\end{citebib}

\subsubsection{Publication Date---General}
% 14.142 Publication Date---General
\label{14.142}

\begin{citebib}
\AtNextCitekey{\clearfield{shorthand}}
%\item \cite[6.56; cf. 16th ed. (2010), 6.54]{chicago2017}
\item \cite*[6.56]{chicago2017}; cf. 16th ed. \parencite*{chicago2010}, 6.54.
\item \cite{turabian2013}
\end{citebib}

\setcounter{subsubsection}{143}
\subsubsection{Multivolume works published over more than one year}
% 14.144 Multivolume works published over more than one year
\label{14.144}

\begin{citebib}
\item \cite[329]{hayek2011}
\item \cite{tillich1951}
\end{citebib}

\noindent Citing Hayek with the preamble or entry option
\opt{swapvol}:

\begin{citebib}
\AtNextCitekey{\toggletrue{swapvol}}
\item \cite*[329]{hayek2011}
\AtNextBibliography{\toggletrue{swapvol}}
\end{citebib}

\subsubsection{No date of publication}
% 14.145 No date of publication

\begin{bibonly}
\nocite{boston,edinburgh1750,edinburgh}
\end{bibonly}

\subsubsection{Forthcoming publications}
% 14.146 Forthcoming publications
\label{14.146}

\begin{citebib}
\item \cite{author}
\item \cite[345--46]{writer}
\item \cite{contributor}
\end{citebib}

\setcounter{subsubsection}{158}
\subsubsection{Books requiring a specific application or device (e-books)}
% 14.159 Books requiring a specific application or device (e-books)

\begin{citebib}
\item \cite{borel2015}
\end{citebib}

\setcounter{subsubsection}{160}
\subsubsection{Books consulted online}
% 14.161 Books consulted online

The first and third notes below present a challenge: If a bibliography
database entry contains an address for a work, such as a DOI, Windy
City prints it in the work's first, long citation. Such is the case
with the second note below. To cite an address for just part of a
work, but print one for the whole work in the bibliography, you need
to override the style's default behavior. The first and third notes do
this with a command that temporarily clears the work's DOI from its
bibliography database entry. Here's an example from the source:

\begin{verbatim}
   \AtNextCitekey{\clearfield{doi}}
   \item \cite[chap. 3, \url{https://doi.org/10.1093/acprof:oso/
               9780199343638.003.0004}]{bonds2014}
\end{verbatim}

\begin{citebib}
\AtNextCitekey{\clearfield{doi}}
\item \cite[chap. 3, \url{https://doi.org/10.1093/acprof:oso/9780199343638.003.0004}]{bonds2014}
\item \cite[59]{lystra2004}
\AtNextCitekey{\clearfield{doi}}
\item \cite[chap. 11, \url{https://doi.org/10.1093/acprof:oso/9780199343638.003.0012}]{bonds2014}
\item \cite[60--61]{lystra2004}
\end{citebib}

\subsubsection{Freely available electronic editions of older works}
% 14.162 Freely available electronic editions of older works

The first example comes close to \textit{CMOS}, except that,
consistent with \ref{14.114} and \ref{15.40}, it lists the edition by
Project Gutenberg as a reprint.

\begin{citebib}
\item \cite[bk. 6, chap. 1]{james2008}
\item \cite[1:243]{james1909}
\end{citebib}

\subsubsection{Books on CD-ROM and other fixed media}
% 14.163 Books on CD-ROM and other fixed media
\label{14.163}

\begin{citebib}
\item \cite*[1.4]{chicago2003}
\end{citebib}

\setcounter{subsection}{5}
\subsection{Periodicals}
\setcounter{subsection}{14}

\setcounter{subsubsection}{170}
\subsubsection{Journal volume, issue, and date}
% 14.171 Journal volume, issue, and date
\label{14.171}

The note for Harper includes the month of publication. Windy City
includes it in the bibliography as well, even though \textit{CMOS}
omits it. As for Lock's entry, \textit{CMOS} clearly errs in printing
the surname twice. Also, for Wilder's article, Windy City prints
\textit{nos.} before \textit{1/2}, not \textit{no.}, as \textit{CMOS}
has it. To print the correct season, Wilder's entry in the
bibliography database includes \textit{Fall} in the \bibfield{issue}
field. Using the \bibfield{date} field with \textit{2013-23} would
print \textit{Autumn 2013}.

\begin{citebib}
\item \cite[155]{lock2015}
\item \cite[651]{wesoky2015}
\item \cite[645]{harper2014}
\item \cite[60]{wilder2013}
\item \cite[52]{beattie1974}
\end{citebib}

\subsubsection{Forthcoming journal articles}
% 14.172 Forthcoming journal articles
\label{14.172}

\begin{citebib}
\item \cite{authora}
\item \cite{jubb2015}
\end{citebib}

\subsubsection{Journal article preprints}
% 14.173 Journal article preprints
\label{14.173}

\begin{citebib}
\item \cite{huang2015}
\end{citebib}

\subsubsection{Journal page references}
% 14.174 Journal page references

\begin{citebib}
\item \cite{gold2015}
\item \cite[2--3]{paudyal2015}
\end{citebib}

\subsubsection{Journal articles consulted online}
% 14.175 Journal articles consulted online

\begin{citebib}
\item \cite[268]{whitney1929}
\item \cite[260--61]{schoenfield2016}
\end{citebib}

\subsubsection{Access dates for journal articles}
% 14.176 Access dates for journal articles

\begin{citebib}
\item \cite[81]{narr2015}
\item \cite[88--89]{narr2015}
\end{citebib}

\setcounter{subsubsection}{177}
\subsubsection{Journal special issues}
% 14.178 Journal special issues

\begin{citebib}
\item \cite{tezuka2013}
\end{citebib}

\setcounter{subsubsection}{179}
\subsubsection{Articles published in installments}
% 14.180 Articles published in installments

By default, Windy City prints each installment as a separate entry. To
get the format for the series, you'd need to use the \bibtype{misc}
entry type.

\begin{citebib}
\item \cite[312]{brown1978}
\end{citebib}

\setcounter{subsubsection}{181}
\subsubsection{Place where journal is published}
% 14.182 Place where journal is published

\begin{citebib}
\item \cite[65--70]{luu1999}
\item \cite{garrett1975}
\end{citebib}

\subsubsection{Translated or edited article}
% 14.183 Translated or edited article

\begin{citebib}
\item \cite{authorb}
\item \cite{authorc}
\end{citebib}

\subsubsection{New series for journal volumes}
% 14.184 New series for journal volumes
\label{14.184}

\begin{citebib}
\item \cite[414]{sewall1896}
\item \cite{moraes1950}
\end{citebib}

\subsubsection{Short titles for articles}
% 14.185 Short titles for articles

\begin{citebib}
\item \cite[223]{rosenblum2015}
\item \cite[225]{rosenblum2015}
\end{citebib}

\subsubsection{Abstracts}
% 14.186 Abstracts

\begin{citebib}
\item \cite{matute2015}
\end{citebib}

\setcounter{subsubsection}{187}
\subsubsection{Basic citation format for magazine articles}
% 14.188 Basic citation format for magazine articles

\begin{citebib}
\item \cite[48]{saulnier2008}
\item \cite[59]{lepore2015}
\end{citebib}

\subsubsection{Magazine articles consulted online}
% 14.189 Magazine articles consulted online

\begin{citebib}
\item \cite{vick2015}
\item \cite[5]{hanemann1926}
\end{citebib}

\subsubsection{Magazine departments}
% 14.190 Magazine departments

\begin{citebib}
\item \cite{marx2015}
\item \cite{wallraff2008}
\item \cite{gourmet2000}
\end{citebib}

\subsubsection{Basic citation format for newspaper articles}
% 14.191 Basic citation format for newspaper articles

\begin{citebib}
\item \cite{editorial1990}
\item \cite{royko1992}
\item \cite{forester2000}
\item \cite{samenow2016}
\end{citebib}

\setcounter{subsubsection}{194}
\subsubsection{Regular columns or features}
% 14.195 Regular columns or features

\begin{citebib}
\item \cite{jaffe2015}
\item \cite{editorial2015}
\end{citebib}

\setcounter{subsubsection}{196}
\subsubsection{Weekend supplements, magazines, and the like}
% 14.197 Weekend supplements, magazines, and the like

\begin{citebib}
\item \cite[48]{ghansah2015}
\end{citebib}

\setcounter{subsubsection}{198}
\subsubsection{Unsigned newspaper articles}
% 14.199 Unsigned newspaper articles

\begin{citebib}
\item \cite{nytimes2002}
\end{citebib}

\subsubsection{News services and news releases}
% 14.200 News services and news releases

\begin{citebib}
\item \cite{ap2015}
\end{citebib}

\setcounter{subsubsection}{201}
\subsubsection{Book reviews}
% 14.202 Book reviews
\label{14.202}

\begin{citebib}
\item \cite[B13--B14]{ratliff1999}
\item \cite{kamp2006}
\item \cite{brehm2015}
\end{citebib}

\setcounter{subsubsection}{203}
\subsubsection{Unsigned reviews}
% 14.204 Unsigned reviews
\label{14.204}

On the use of the \bibfield{type} field to format this example
correctly, see section \ref{stdfields}.

\begin{citebib}
\item \cite{zeitung1828}
\end{citebib}

\setcounter{subsection}{6}
\subsection{Websites, Blogs, and Social Media}
\setcounter{subsection}{14}

\setcounter{subsubsection}{207}
\subsubsection{Citing blog posts and blogs}
% 14.208 Citing blog posts and blogs
\label{14.208}

In \textit{CMOS}, one citation refers to \textit{The Chronicle of
Higher Education} and another to \textit{Chronicle of Higher
Education}. The latter also appears in \ref{15.51}, so it's probably
correct.

\begin{citebib}
\item \cite{amlen2015}
\item \cite{germano2017}
\item \cite{amlen}
\item \cite{linguafranca}
\item \cite{jim2017}
\end{citebib}

\subsubsection{Citing social media content}
% 14.209 Citing social media content

\begin{citebib}
\item \cite{diaz2016}
\item \cite{obrien2015}
\item \cite{chicago2015}
\item \cite{licis2016}
\end{citebib}

\subsubsection{Electronic mailing lists and forums}
% 14.210 Electronic mailing lists and forums
\label{14.210}

\begin{citebib}
\item \cite{powell1998}
\item \cite{braun2016}
\end{citebib}

\setcounter{subsection}{7}
\subsection{Papers, Contracts, and Reports}
\setcounter{subsection}{14}

\setcounter{subsubsection}{214}
\subsubsection{Theses and dissertations}
% 14.215 Theses and dissertations

\begin{citebib}
\item \cite[59]{vedrashko2006}
\item \cite[v]{subacus2015}
\item \cite{choi2008}
\end{citebib}

\subsubsection{Unpublished manuscripts}
% 14.216 Unpublished manuscripts
\label{14.216}

\begin{citebib}
\item \cite{balderdash2017}
\end{citebib}

\subsubsection{Lectures and papers or posters presented at meetings}
% 14.217 Lectures and papers or posters presented at meetings
\label{14.217}

\begin{bibonly}
\nocite{hong2015}
\nocite{teplin2005}
\end{bibonly}

\subsubsection{Working papers and the like}
% 14.218 Working papers and the like
\label{14.218}

\begin{citebib}
\item \cite{lucki1980}
\item \cite{bronfenbrenner2011}
\item \cite{alarcon1771}
\end{citebib}

\setcounter{subsubsection}{219}
\subsubsection{Pamphlets, reports, and the like}
% 14.220 Pamphlets, reports, and the like

\begin{citebib}
\item \cite{lifestyles1996}
\item \cite{mcdonalds2014}
\item \cite[¶2,620]{standardtax1996}
\end{citebib}

\setcounter{subsection}{8}
\subsection{Manuscript Collections}
\setcounter{subsection}{14}

\setcounter{subsubsection}{221}
\subsubsection{Note forms versus bibliography entries}
% 14.222 Note forms versus bibliography entries
\label{14.222}

\begin{citebib}
\item \cite[Alvin Johnson, memorandum, 1937, file 36,][]{kallen}
\item \cite[Revere's Waste and Memoranda Book (vol. 1, 1761--83; vol. 2,
1783--97),][]{revere}
\end{citebib}

\setcounter{subsubsection}{228}
\subsubsection{Examples of note forms for manuscript collections}
% 14.229 Examples of note forms for manuscript collections
\label{14.229}

\begin{citenobib}
\item \cite[Burton to Merriam, telegram, 26 January 1923, box 26, folder
17,][]{merriam}
\item \cite[Minutes of the Committee for Improving the Condition of the Free
Blacks, Pennsylvania Abolition Society, 1790--1803,][]{pasociety}
\item \cite[Louis Agassiz, report to the Committee of Overseers\ldots
\mkbibbrackets{28 December 1859},][]{overseers}
\item \cite[Gilbert McMicken to Alexander Morris, 29 November 1881, Glasgow
(Scotland), Document 1359, fol. 1r,][MS-12-84]{morris}
\item \cite[Daily Expenses, July 1787, images 7--8,][]{washington}
\item \cite[Minutes, 15 April 1795,][]{pasociety}
\end{citenobib}

\setcounter{subsubsection}{229}
\subsubsection{Examples of bibliography entries for manuscript collections}
% 14.230 Examples of bibliography entries for manuscript collections
\label{14.230}

Examples with note forms in section \ref{14.229}:

\begin{bibonly}
\nocite{merriam,pasociety,overseers,morris,washington}
\end{bibonly}

\noindent Examples unique to this section:

\begin{citebib}
\item \cite{wonpr}
\item \cite{dinkel}
\end{citebib}

\setcounter{subsection}{9}
\subsection{Special Types of References}
\setcounter{subsection}{14}

\setcounter{subsubsection}{231}
\subsubsection{Reference works consulted in physical formats}
% 14.232 Reference works consulted in physical formats
\label{14.232}

Some reference works show full publication information in the same way
as books. Use the \bibtype{book} entry type for them. The first three
citations below are different. They need the \bibtype{reference} or
\bibtype{inreference} entry type. See section \ref{entrytypes} for
more information. Following the suggestion in \textit{CMOS} 14.232,
\bibtype{reference} and \bibtype{inreference} works don't appear in
bibliographies.

\begin{citebib}
\item \cite{salvation1980}
\item \cite{hootananny2009}
\item \cite{dab1937}
\item \cite[s.vv. \mkbibquote{police ranks}, \mkbibquote{postal addresses}]{timestyle2003}
\item \cite[6.8.2]{mla2008}
\end{citebib}

\subsubsection{Reference works consulted online}
% 14.233 Reference works consulted online
\label{14.233}

Like some of the reference works in the previous section, the ones
below need the \bibtype{reference} or \bibtype{inreference} entry
type. As odd as it may seem, but consistent with \textit{CMOS}, they,
too, aren't included in bibliographies. See section \ref{entrytypes}
for more information.

\begin{citenobib}
\item \cite{toscanini2016}
\item \cite{cairns2016}
\item \cite{wikipedia2016}
\item \cite{merriam2016}
\end{citenobib}

\subsubsection{Citing individual reference entries by author}
% 14.234 Citing individual reference entries by author

\begin{citebib}
\item \cite{isaacson2005}
\end{citebib}

\subsubsection{Citing paintings, photographs, and sculpture}
% 14.235 Citing paintings, photographs, and sculpture

\begin{citebib}
\item \cite{dali1931}
\item \cite{mccurry1984}
\item \cite{picasso1942}
\end{citebib}

\setcounter{subsubsection}{245}
\subsubsection{Citing specific editions of classical references}
% 14.246 Citing specific editions of classical references

\begin{citebib}
\item \cite{epictetus1916}
\end{citebib}

\setcounter{subsubsection}{250}
\subsubsection{Modern editions of the classics}
% 14.251 Modern editions of the classics

\begin{citebib}
\item \cite{aristotle1983}
\item \cite{maimonides1965}
\end{citebib}

\setcounter{subsubsection}{257}
\subsubsection{Patents}
% 14.258 Patents

\begin{citebib}
\item \cite{iizuka1986}
\end{citebib}

\subsubsection{Standards}
% 14.259 Standards

\begin{citebib}
\item \cite[3.2.2]{niso2010}
\item \cite{w3c2008}
\end{citebib}

\setcounter{subsubsection}{259}
\subsubsection{Citations taken from secondary sources}
% 14.260 Citations taken from secondary sources

\begin{citebib}
\item \cite[269]{zukofsky1931}, quoted in \cite[78]{costello1981}
\end{citebib}

\section{Examples from \emph{CMOS} Chap. 15, ``Author-Date
References''}
\label{paren}

Examples in this section reproduce those in \textit{CMOS} chapter 15.
To help with cross-checking, subsection numbers and headings are from
\textit{CMOS}. Since parenthetical citations are relatively simple,
and since the format of references lists is derivative of the default,
the examples below are more selective than those in the previous
section.

\subsection{Basic Format, with Examples and Variations}
\setcounter{subsection}{15}

\setcounter{subsubsection}{8}
\subsubsection{Author-date references—examples and variations}
% 15.9 Author-date references—examples and variations
\label{15.9}

\begin{citeref}
\item \parencite[87--88]{strayed2012}
\item \parencite[32]{daum2015}
\item \parencite[188]{grazer2015}
\item \parencite[242--55]{garcia1988}
\item \parencite[310]{gould1984a}
\item \parencite[484--85]{bagley2015}
\item \parencite[312]{liu2015}
\end{citeref}

\setcounter{subsection}{1}
\subsection{Reference Lists and Text Citations}
\setcounter{subsection}{15}

\setcounter{subsubsection}{13}
\subsubsection{Placement of dates in reference list entries}
% 15.14 Placement of dates in reference list entries
\label{15.14}

\begin{citeref}
\item \parencite{pager2015}
\item \parencite{unger2014}
\end{citeref}

\setcounter{subsubsection}{19}
\subsubsection{Reference list entries with same author(s), same year}
% 15.20 Reference list entries with same author(s), same year
\label{15.20}

\begin{citeref}
\item \parencite[218]{fogel2004b}
\item \parencite[45--46]{fogel2004a}
\end{citeref}

\setcounter{subsubsection}{21}
\subsubsection{Text citations---basic form}
% 15.22 Text citations—basic form
\label{15.22}

Ignore the error in \textit{CMOS}: In reference lists, a title goes
after the year, not before.

\begin{citeref}
\item \parencite{hetherington2015}
\item \parencite{grove2015}
\item \parencite{hetherington2015,grove2015}
\end{citeref}

\begin{citeref}
\item \parencite{doershuk2017}
\item \parencite{doershuk2016}
\end{citeref}

\setcounter{subsubsection}{23}
\subsubsection{Additional material in text citations}
% 15.24 Additional material in text citations

\begin{citenoref}
\item \parencite[; t-tests are used here]{mandolan2017}
\end{citenoref}

\subsubsection{Text citations in relation to surrounding text and punctuation}
% 15.25 Text citations in relation to surrounding text and punctuation
\label{15.25}

\begin{quote} Fiorina et al. \parencite*{fiorina2005} and Fischer and
Hout \parencite*{fischer2006} reach more or less the same conclusions.
In contrast, Abramowitz and Saunders \parencite*{abramowitz2005}
suggest that the mass public is deeply divided between red states and
blue states and between churchgoers and secular voters. \end{quote}

\setcounter{subsubsection}{26}
\subsubsection{Several references to the same source}
% 15.27 Several references to the same source

\begin{citenoref}% 'even\-tanned' prevents even--[break]tanned
\item Complexion figures prominently in Morgan's descriptions. When
Jasper compliments his mother's choice of car (a twelve-cylinder
Mediterranean roadster with leather and wood-grained interior), ``his
cheeks blotch indignantly, painted by jealousy and rage''
\parencite[47]{chaston2000}. On the other hand, his mother's mask
never changes, her ``even\-tanned good looks''
\parencite[56]{chaston2000}, ``burnished visage''
\parencite[101]{chaston2000}, and ``air-brushed confidence''
\parencite[211]{chaston2000} providing the foil to the drama in her
midst. \end{citenoref}

\setcounter{subsubsection}{28}
\subsubsection{Text citations of works with more than three authors}
% 15.29 Text citations of works with more than three authors

\begin{citenoref}
\item \parencite{schonen2017a}
\item \parencite{schonen2017b}
\end{citenoref}

\subsubsection{Multiple text references}
% 15.30 Multiple text references

\begin{citenoref}
\item \parencite{armstrong1989,beigl1989,pickett1985}
\item \parencites{whittaker1967,whittaker1975,wiens1989a,wiens1989b}
\item \parencites[328]{wong1999}[475]{wong2000}[67]{garcia1998}
\item \parencites{guest2006}[see also][]{stalle2008}{rahn2009}
\end{citenoref}

\setcounter{subsection}{2}
\subsection{Author-Date References: Special Cases}
\setcounter{subsection}{15}

\setcounter{subsubsection}{33}
\subsubsection{Author-date format for anonymous works (no listed author)}
% 15.34 Author-date format for anonymous works (no listed author)
\label{15.34}

See section \ref{stdfields} on the use of the \bibfield{authortype}
field for anonymous works.

\begin{citeref}
\item \parencite{anon1610}
\item \parencite{anon1547}
\item \parencite{horsley1796}
\item \parencite{hawkes1834}
\end{citeref}

\subsubsection{Pseudonyms in author-date references}
% 15.35 Pseudonyms in author-date references

\begin{citeref}
\item \parencite{stendhal1925}
\end{citeref}

\subsubsection{Editor in place of author in text citations}
% 15.36 Editor in place of author in text citations

\begin{citeref}
\item \parencite{silverstein1974}
\item \parencite{soltes1999}
\end{citeref}

\subsubsection{Organization as author in author-date references}
% 15.37 Organization as author in author-date references

In the reference list, \textit{CMOS} errs in printing \textit{:1997}
after \textit{ISO 4}. Compare it with the nearly identical example in
\ref{14.84}.

\begin{citeref}
\item \parencite{iso1997.ref}
\end{citeref}

\setcounter{subsubsection}{39}
\subsubsection{Reprint editions and modern editions—more than one date}
% 15.40 Reprint editions and modern editions—more than one date
\label{15.40}

\begin{citeref}
\item \parencite{austen2003}
\item \parencite{darwin1964}
\item \parencite{maitland1998}
\end{citeref}

\subsubsection{Multivolume works published over more than one year}
% 15.41 Multivolume works published over more than one year
\label{15.41}

\begin{citeref}
\item \parencite[1:133]{tillich1951}
%\item \parencite[vol. 2]{tillich1951}
\item \parencite[329]{hayek2011}
\end{citeref}

\subsubsection{Cross-references to multiauthor books in reference lists}
% 15.42 Cross-references to multiauthor books in reference lists
\label{15.42}

\begin{citeref}
\item \parencite{draper1987}
\item \parencite{harrington1987}
\item \parencite{zukowsky1987}
\end{citeref}

\setcounter{subsubsection}{43}
\subsubsection{No date of publication in author-date references}
% 15.44 No date of publication in author-date references

\begin{citeref}
\item \parencite{nano1750}
\item \parencite{nano}
\end{citeref}

\subsubsection{``Forthcoming'' in author-date references}
% 15.45 ``Forthcoming'' in author-date references
\label{15.45}

\begin{citeref}
\item \parencite{faraday}
\end{citeref}

\setcounter{subsubsection}{46}
\subsubsection{Parentheses or comma with issue number}
% 15.47 Parentheses or comma with issue number

In the second reference list entry below, Windy City prints a colon
after the journal number. \textit{CMOS} prints a comma there---likely
an error.

\begin{citeref}
\item \parencite{glass2014}
\item \parencite{meyerovitch1959}
\end{citeref}

\subsubsection{Colon with volume number}
% 15.48 Colon with volume number

The example below shows the output when an article's publication month
isn't included in the bibliography database and so doesn't come
between a volume number and a page reference.

\begin{citeref}
\item \parencite{gunderson2015}
\end{citeref}

\subsubsection{Newspapers and magazines in reference lists}
% 15.49 Newspapers and magazines in reference lists

\begin{citeref}
\item \parencite{nytimes2002}
\end{citeref}

\setcounter{subsubsection}{50}
\subsubsection{Citing blogs in author-date format}
% 15.51 Citing blogs in author-date format
\label{15.51}

\textit{CMOS} seems mistaken in printing a period after
\textit{Chronicle of Higher Education} instead of a comma. Compare
with \ref{14.208} and \ref{15.42}.

\begin{citeref}
\item \parencite{germano2017}
\end{citeref}

\subsubsection{Citing social media content in author-date format}
% 15.52 Citing social media content in author-date format
\label{15.52}

\begin{citeref}
\item \parencite{diaz2016}
\item \parencite{brien2015}
\item \parencite{chicago2015}
\end{citeref}

\setcounter{subsubsection}{53}
\subsubsection{Manuscript collections in author-date format}
% 15.54 Manuscript collections in author-date format
\label{15.54}

This example requires the \cmd{parenauth} citation command (see
section \ref{parenauth}):

\begin{citeref}
\item Alvin Johnson, in a memorandum prepared sometime in 1937
\parenauth[file 36]{kallen}, observed that\ldots
\end{citeref}

\noindent An example using \cmd{parencite}:

\begin{citeref}
\item \parencite{dinkel}
\end{citeref}

\subsubsection{Patents or other documents cited by more than one date}
% 15.55 Patents or other documents cited by more than one date

\begin{citeref}
\item \parencite{iizuka1986}
\end{citeref}

\subsubsection{``Quoted in'' in author-date references}
% 15.56 “Quoted in” in author-date references

\begin{citeref}
\item In Louis Zukofsky's ``Sincerity and Objectification,''
from the February 1931 issue of \textit{Poetry} magazine
\parencite[quoted in][]{costello1981}\ldots
\end{citeref}

\defbibnote{sh}{This section shows the output of \cmd{printbiblist}
with the argument \opt{shorthand}. Running \cmd{printshorthands}
produces the same output. By default, works in this list also appear
in bibliographies. To exclude them, use the preamble option
\opt{nolos}. See section \ref{preamble} for more information.\\}%

\defbibnote{bib}{This section shows the default output of
\cmd{printbibliography}. The next section shows the author-date
format.\\}%

\defbibnote{ref}{This section shows the output of
\cmd{printbibliography} in the author-date format. For information on
how to produce this output, see section \ref{preamble}. Issues with
sorting in this section are mentioned there. Creating a reference list
in the preferred way, with the \opt{reflist} preamble option, should
prevent those issues.\\}%

\titleformat{\section}{\large\bfseries\filcenter}{}{2ex}{}
\printbiblist[prenote=sh]{shorthand}
\refstepcounter{sh}\label{sh}
\printbibliography[notkeyword=notinbib,prenote=bib]
\refstepcounter{bib}\label{bib}
\printbibliography[%
  env=reflist,
  heading=references,
  notkeyword=notinref,
  prenote=ref]
\refstepcounter{ref}\label{ref}
\end{document}