\section{Construction from scratch}

The object \Lkeyword{new} constructs a solid.  Two parameters are used: \Lkeyword{sommets}
which indicates the list of coordinates of the different vertices, and \Lkeyword{faces} which
gives the list of faces of the solid; a face is characterized by a list of the indices of its\Index{vertices}, listed
in counterclockwise order
when the face is viewed from the exterior of the solid.

\clearpage

\subsection{Example 1: a house}
\begin{LTXexample}[width=6.5cm]
\psset{unit=0.5}
\psset{lightsrc=10 -20 50,viewpoint=50 -20 30 rtp2xyz,Decran=50}
\begin{pspicture*}(-7,-4)(7,7)
\psSolid[object=new,
  sommets=
    2  4  3   -2  4  3  -2 -4  3   2 -4  3
    2  4  0   -2  4  0  -2 -4  0   2 -4  0
   0  4  5   0 -4  5,
  faces={
  [0 1 2 3] [7 6 5 4] [0 3 7 4]
  [3 9 2]   [1 8 0]   [8 9 3 0]
  [9 8 1 2] [6 7 3 2] [2 1 5 6]},
  num=all,show=all,action=draw]
\end{pspicture*}
\end{LTXexample}

Note that the solid \Lkeyword{new} uses the same options as the other solids.
For example, we give the same solid as above below, using the parameters
\Lkeyword{hollow}, \Lkeyword{incolor}, \Lkeyword{fillcolor}, and \Lkeyword{rm}.

%% example 2
\begin{LTXexample}[width=6.5cm]
\psset{unit=0.5}
\psset{lightsrc=10 -20 50,viewpoint=50 -20 30 rtp2xyz,Decran=50}
\begin{pspicture*}(-7,-3.5)(7,7.5)
\psSolid[object=new,fillcolor=red!50,incolor=yellow,
  action=draw**,hollow,rm=2,
  sommets=
   2  4  3  -2  4  3  -2 -4  3   2 -4  3
   2  4  0  -2  4  0  -2 -4  0   2 -4  0
   0  4  5   0 -4  5,
  faces={   [0 1 2 3][7 6 5 4][0 3 7 4]
   [3 9 2]  [1 8 0]  [8 9 3 0][9 8 1 2]
   [6 7 3 2][2 1 5 6]},
  num=all,show=all]
\end{pspicture*}
\end{LTXexample}

\subsection{Example 2: a \Index{hyperboloid} with a fixed radius}

%\psset{lightsrc=10 20 30,SphericalCoor=true,viewpoint=50 20 30}
%\psset{SphericalCoor=true,viewpoint=50 20 30}


As always, the options of the macro \Lcs{psSolid} can handle Postscript code, even \textit{jps code}

Unlike an example in pure PostScript, where we use the parameters
$a$, $b$ and $h$ which are transmitted by the options of PSTricks.
In this way one obtains a variable solid constructed from scratch.

Remark: the code being used comes from a \textit{jps} source used in practice, as in:

\noindent\url{http://melusine.eu.org/lab/bjps/solide/tour.jps}
\begin{LTXexample}[width=6.5cm]
\psset{unit=0.75}
\psset{lightsrc=10 -20 50,viewpoint=50 -20 30 rtp2xyz,Decran=50}
\begin{pspicture*}(-5,-5)(3,5)
\psSolid[object=new,fillcolor=red!50,incolor=yellow,
  hollow, a=10, %% nb d'etages
  b=20, %% diviseur de 360, nb de meridiens
  h=8,  %% hauteur
  action=draw**,sommets=
   /z0 h neg 2 div def
   a -1 0 {
    /k exch def
    0 1 b 1 sub {
     /i exch def
     /r z0 h a div k mul add dup mul 4 div 1 add sqrt def
     360 b idiv i mul cos r mul 360 b idiv i mul sin r mul
     z0 h a div k mul add
    } for
   } for,
   faces={
    0 1 a 1 sub {
    /k exch def
    k b mul 1 add 1 k 1 add b mul 1 sub {
    /i exch def
    [i i 1 sub b i add 1 sub b i add]
   } for
   [k b mul k 1 add b mul 1 sub k 2 add b mul 1 sub k 1 add b mul]
  } for
}]
\end{pspicture*}
\end{LTXexample}



\subsection{Example 3: importing external files}


From a file describing a solid in a particular format (other than \texttt{\Index{.obj}} or \texttt{\Index{.off}}),
we can create a \texttt{\Index{.dat}} file containing the coordinates of the vertices,
and another \texttt{.dat} file containing the tables of indices of the vertices on each face.
These files can then be entered as parameters \Lkeyword{sommets} and \Lkeyword{faces}
when using the PostScript instruction \Lkeyword{run}.


In the example below, the files \verb+sommets_nefer.dat+
and \verb+faces_nefer.dat+ have been placed in the directory of the compiler.

\begin{LTXexample}[width=5.5cm]
\psset{unit=0.4}
\definecolor{AntiqueWhite}{rgb}{0.98,0.92,0.84}
\begin{pspicture}(-7,-9)(7,7)
\psset{lightsrc=30 -40 10}
\psset{viewpoint=50 -50 20 rtp2xyz,Decran=50}
\psset{RotX=90,sommets= (data/sommets_nefer.dat) run}
\psSolid[object=new,fillcolor=AntiqueWhite,linewidth=0.5\pslinewidth,
    faces={(data/faces_nefer.dat) run}]%
\psSolid[object=new,fillcolor=red,linewidth=0.5\pslinewidth,
    faces={(data/faces_nefer_levres.dat) run}]%
\psSolid[object=new,fillcolor=black,
    faces={(data/faces_nefer_sourcils.dat) run}]%
\end{pspicture}
\hfill
\begin{pspicture}(-7,-9)(7,7)
\psset{lightsrc=-10 -40 -5,lightintensity=.5}
\psset{viewpoint=50 -80 10 rtp2xyz,Decran=50}
\psset{RotX=90,RotZ=30,sommets= (data/sommets_nefer.dat) run}
\psSolid[object=new,fillcolor=AntiqueWhite,linewidth=0.5\pslinewidth,
  grid,faces={(data/faces_nefer.dat) run}]
\psSolid[object=new,fillcolor=red,linewidth=0.5\pslinewidth,grid,
    faces={(data/faces_nefer_levres.dat) run}]
\psSolid[object=new,fillcolor=black,
    faces={(data/faces_nefer_sourcils.dat) run}]
\end{pspicture}
\end{LTXexample}


\endinput